Jump to content

Watch of Today


mk3

Recommended Posts

15 hours ago, stroppy said:

Jeff...I've had a bad bout of insomnia this past night but the reading material you gave me helped the night pass by.  Thanks!  I was engrossed by all the details...especially about the founders of the company and how one went a bit kooky.

It's certainly an interesting read!

Link to comment
Share on other sites

Today its a lovely mid size 'Services Navigator' for me. I got it for a steal as a none runner of the bay it had a few teeth missing on the ratchet wheel replaced that and stuck a cleaner dial on I had laying about in my spares tubs. the movement is a ORIS 292 and keeps amazingly good time for a 60-70 year old a pin lever.IMG_0296[1].JPG

  • Like 1
Link to comment
Share on other sites

My Sekonda today, with Poljot 2612.1 alarm movement.

sekonda-apr-22-3.jpg

This was the first watch I ever serviced. When I received it, was running 28 minutes per day slow, amplitude was 86°, and beat error was 10ms. The acrylic crystal was also really badly scratched up. Now it's running +/-5s/d, amplitude is around 280°, and beat error around 0.5ms, and I've polished the crystal. I also recently overhauled the very stretched folded-link jubilee bracelet.

sekonda-apr-22-1.jpg

I did a write-up of the service here, http://www.stefanv.com/watches/restoring-a-russian-alarm-watch.html, and the crystal polishing here, http://www.stefanv.com/watches/polishing-an-acrylic-watch-crystal.html.

Edited by svorkoetter
  • Like 6
Link to comment
Share on other sites

4 hours ago, svorkoetter said:

My Sekonda today, with Poljot 2612.1 alarm movement.

sekonda-apr-22-3.jpg

This was the first watch I ever serviced. When I received it, was running 28 minutes per day slow, amplitude was 86°, and beat error was 10ms. The acrylic crystal was also really badly scratched up. Now it's running +/-5s/d, amplitude is around 280°, and beat error around 0.5ms, and I've polished the crystal. I also recently overhauled the very stretched folded-link jubilee bracelet.

sekonda-apr-22-1.jpg

I did a write-up of the service here, http://www.stefanv.com/watches/restoring-a-russian-alarm-watch.html, and the crystal polishing here, http://www.stefanv.com/watches/polishing-an-acrylic-watch-crystal.html.

The entire presentation of this Sekonda is just great.  Really snazzy looking watch there.  Do Sekonda still make watches?

  • Like 1
Link to comment
Share on other sites

15 minutes ago, stroppy said:

The entire presentation of this Sekonda is just great.  Really snazzy looking watch there.  Do Sekonda still make watches?

Thanks Stroppy.

Sekonda never made watches. :)

Back in the 70s to 90s, they imported mechanical watches from the USSR, like my example above.

These days, they import quartz watches from China.

Apparently they had a lot of funny TV ads for their watches back in the day. You can search for them on YouTube.

Edited by svorkoetter
Link to comment
Share on other sites

2 hours ago, svorkoetter said:

Thanks Stroppy.

Sekonda never made watches. :)

Back in the 70s to 90s, they imported mechanical watches from the USSR, like my example above.

These days, they import quartz watches from China.

Apparently they had a lot of funny TV ads for their watches back in the day. You can search for them on YouTube.

I just watched the 80's commercials featuring Ronnie Barker (RIP) ...what a hoot!:D

Link to comment
Share on other sites

NICE!

2 hours ago, stroppy said:

Looks like they are all Chinese watches coming out of the factory with makes "Jaragar" and "Kronen & Sohn".  Both European-sounding brands for what are Chinese watches through and through.

I saw a kronen & sohn on auction site, (not the bay), looked good until I searched, not against china brands, just don't try to make something out to be what it isn't, Brandfoolery?

Link to comment
Share on other sites

I couldn't find anything about them either except for a couple of more expensive gold cased ones. Its a really nice watch clean and simple to read I can't even guess when it was made maybe the 60's it also keeps excellent time.

Link to comment
Share on other sites

Wearing a new acquisition today..

 

A Mondia 'Top Second'...the hole in the dial 'blinks' as there is a red panel that is fixed to an extended pivot of the escape wheel. "Poor man's complication!".

Powered by an AS1913...not my favourite movement but this is the only one used for these watches. Apart from the movement construction, which is a bit fiddly, I'm not a fan of the quickset by pushing in the crown. Also the clutch wheel is a weak point in these movements.

I've known about these watches for some time but they've usually been priced more than I was willing to pay. This turned up at a local flea market at the right price (about what I would spend for a night out with the boys!) so I snapped it up. The dial condition probably didn't help the seller as its a bit spotted. Case is pretty scratched and the crystal could do with a replacement as there is yellowing of the glue around the edges but no urgent need to fix it...one of these days I'll get around to it!

Have a good weekend !

 

P_20160430_173825.jpg

P_20160430_173826.jpg

P_20160430_174030.jpg

  • Like 4
Link to comment
Share on other sites

Hi Noirrac,

I won't be opening this watch any time soon but there's some good write-ups if you Google 'top-second'. 

As far as complications go, this one isn't complicated at all! Something like the waving Mao Tse-Tung.

Cheers!

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I went with 8.90£ because 12th century Italian mathematicians are always excellent topics to bring up when trying to get your guests to go home. 
    • As a beginner, I’ve found this forum invaluable. I doubt I would’ve persevered without its support. I’ve had the confidence to attempt things that seemed to me impossible only because I knew there were patient and giving folks gathered around this watering hole, available to share their skill.    I would very much like to know where to go if this one dries up and everyone needs to decamp.  There’s something special about the folks gathered in this group.  How to keep in touch?  
    • After a 3-week work fiasco that took up 137% of my time, I was finally able to get back to restoring a G. Boley 8mm lathe I picked up on eBay. I still need to do a bit of polishing on the tailstock but it works very nicely. Before and after pictures below. In any case, when I was reassembling the motor I wasn't quite sure which side the pully attached to, or if it matters. My question is ... does it matter? The listing photo below shows it the reverse of how I have it now, but it seemed that the cord and the reversing lever(s) should be on the right away from the belt.   
    • Thanks Richard.  That’s clear.   So - another question - how much latitude is there in barrel and spring sizing? Say I have have measured the ID of my barrel to be 9mm and (all other mainspring specs being equal), the closest match I can find for a replacement mainspring is listed with an 8.5mm barrel size, is it acceptable to fit the smaller spring in to the slightly larger barrel without compromising anything functionally?  I’m in this situation now with an AS 1686 which has a 9mm barrel, but the closest replacement I can find has an 8.5mm diameter listed in its specs.  I can find an alternative 9mm spring, but would have to accept a different thickness.  I’m unsure how much wriggle room is acceptable, or whether in mainspring sizing, there’s a priority - ie thickness over barrel size etc. Thanks again for any info.  Cheers, John  
    • We already have a Facebook group run by Mark , so this is a bit moot. Search for “Watch repair lessons” group.   Tom
×
×
  • Create New...