Jump to content

Watch repairer recommendations


Recommended Posts

Ariste Racine started his watch production in 1913 in the Jura mountains north of Geneva. The name "Racine" had already been copyrighted, so Ariste reversed his surname and registered the trademark as "Enicar". The firm produced watches up until 1988. There were massive sales to the Middle and Far East, and you have to watch out for repaints, fakes, etc. This is a nice clean one from the 1960s, with an AR 1010 movement in it.

 

Enicar%201.jpg

 

Enicar%202.jpg

Edited by WillFly
Link to comment
Share on other sites

Another fine watch in remarkable condition with a high quality movement,  well worth keeping and preserving,  I notice it has got Incabloc shock protection.  Incabloc in it's self is fascinating in the way it works and how they ever manufacture such tiny, tiny jewels and settings is a mystery to me.

 

RogerC

Link to comment
Share on other sites

At the moment I have:

 

15 American mechanical hand-wound pocket watches, of which 11 are Railroad Grade and the rest 3 are US military with a 4th UK military with an American (Elgin) movement.

 

15 mechanical hand-wound wristwatches: 4 Roamer, 3 Hamiltons (1 with a Swiss ETA 6497 movement), 3 Wittnauer, 1 Enicar, 1 Elgin, 1 Paul Jobin, 1 Longines, 1 Smiths. All pre-1970 with the exception of the Swiss Hamilton.

 

2 modern quartz watches: 1 Certina DS Podium chronograph and a Seiko Solar.

Edited by WillFly
  • Like 1
Link to comment
Share on other sites

  • 2 years later...

Hello, everyone,

I have a 'Swiss Emperor' chronograph (Valjoux 72 movement) which needs to be serviced.

I have emailed Mark twice about this, but have had no replies.

Can anyone recommend a reliable place to get the necessary work carried out?

I'm in the Harlow, Essex, area; but posting wouldn't be a problem.

Thanks.

Len.

 

 

 

 

image.jpeg

Link to comment
Share on other sites

Hi Folks:

Can anyone recommend a watch repair shop which can reassemble a balance with stud, balance wheel, regulator, stud support and lower and upper indexes for an ETA 6497-1?  The local jewlers I've asked in my area don't want to touch it.  Phone number would be welcomed.  

Thanks,

Timezone (Central NJ)

Link to comment
Share on other sites

Hi:  Thanks for the encouragement but I don't have the level of expertise required for such a delicate repair.  The hairspring has to be reattached and I assume the balance has to be calibrated which would involve test equipment which I don't have. It was my inexperience that broke it in the first place.  Thanks for your reply.

Timezone

Link to comment
Share on other sites

As far as I know ETA does not make a complete balance.  I asked Frei and Esslinger and both said the same.  I've attached a pic of the parts and new balance wheel still in it's sealed package. The bridge is a little blurry. I purchased the balance wheel from Esslinger.

Timezone

Balalnce Parts.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • H Watch Repairers—is there is a ‘standard format’ for the service marks or codes lightly engraved inside cases of pocket watches or wristwatches?   Sometimes I can see there might be a reference to year/ month but other times am confused. I’ve included an image of the rear of a 1951 Hamilton 992B Railroad pocket watch as an example. Thank you for all information you can give, Mike
    • Hi to Blackminou29–am a collector/ caretaker—good luck to you following your repair course—with hindsight I wish I’d pursued a career in both watchmaker/ jeweler fields—good luck with whatever career passion you engage.   Thank you Watchweasol for posting the amazing TZIllustratedGlossary! Best wishes, Mike
    • yes I noticed the new site and I miss the old site. It's the unfortunate problem of the Internet here today gone tomorrow sometimes some of the stuff gets backed up and sometimes well it does not then the problem with the early Seiko's were there were not necessarily designed for distribution across the planet and as such there is no customer support for them. So trying to find early stuff like technical information or sometimes even parts list for older Seiko is is problematic. But I did find you a you tube video. A quick look he seems to take a heck of a lot of time to actually get to the service single I did not watch all that but it does look like he did disassemble or started to say there's a tiny bit here  
    • RichardHarris123: Hello and welcome from Leeds, England.  I have family all over Australia, went as £10 poms Thanks Richard. Hope you’re able to visit your family here and that they’ve all done well 🙂 My relatives arrived from England in the 1790s transported on the ‘Second & Third Fleets’—a story of timber sailing ships, of convicts and doing well in this huge Country of Australia. When I visited the UK in the 1980s, I was too young to comprehend the depth and breadth of its history…  Best wishes, Mike William Chapman, my 4th great Grandad’s charges, at age 23 read at the Old Bailey; sentenced to 7 years of transportation to Sydney.
    • The whole process and the progress are closely observed, it's hand-driven and very controlled. I can't see the "danger", unless you are watching the TV while doing it. As you could have read, and in this quote "wheel" is the balance-wheel.
×
×
  • Create New...