Jump to content

Watch of Today


mk3

Recommended Posts

1 hour ago, anilv said:

Hi Noirrac,

I won't be opening this watch any time soon but there's some good write-ups if you Google 'top-second'. 

As far as complications go, this one isn't complicated at all! Something like the waving Mao Tse-Tung.

Cheers!

Funny!

 

J

Link to comment
Share on other sites

19 minutes ago, Marc said:

Thanks for the vid Marc.  That really is an interesting watch that I've not encountered before. @anilv was right about the simplicity of the top second mechanism: just an additional gear coupled to the escape wheel provides the impulse. The watch industry ingenuity of the 70's was sometimes focused on gimmicky stuff like this, but it's still admirably elegant in its execution. Thanks for sharing it!

 

J

Link to comment
Share on other sites

Time to bring the tone down a few notches. Far too many nice vintage watches here [emoji16]

Posted in Hong Kong on 30th April to my door today 3rd May. So that's what The Flash does while not filming [emoji1]

Sector 250 Ana/Digi Chrono Alarm

2016-05-03%2016.40.57_1.png

Link to comment
Share on other sites

Here is the 'cousin' to the Sector, got it in a pile of watches, add batt, cleaned up and first time setup, (which requires a lot of time), gave this to one of my son's, he barely wears it. Considering it's mass, it is quite comfy.DSCF0154.JPG

  • Like 2
Link to comment
Share on other sites

2 hours ago, Cad101 said:

Oooooo that's funky I like it. I think my things i ordered off thewatchcollector in the good old USA are being delivered by the flashes half brother "The Slow" :D

I've got two orders in with him, a complete 7s26 dive, (blue dial YES!) and a dozen zombie Seiko auto parts movements, he may be in Washington state, but he ships from Philippines, so yeah, it 's a slow boat.

Link to comment
Share on other sites

Yeah, the stuff from Ramon takes time. Even here -- Miami -- it takes a good 3 to 4 weeks and also comes from the Philippines. That Seiko, above, is from a batch of 4 non runners I purchased from him.

Link to comment
Share on other sites

I bought this monster off the bay because I will be travelling OS soon and I want a simple dual zone watch.  Cost me less than twenty bucks (AU).  I opened it up...two jewelled quartz Miyota movements.  Not bad for a cheapy.

ZG640400-D-8-6.JPG  

Link to comment
Share on other sites

So today i'm wearing this Tissot or so it claims to be. I got it about a year ago cheap as a non runner of our friend the bay. I have no problems with the movement CHs Tissot & Fils 17 jewels cal 781 its just the repainted dial the fact that's its glue to the movement with sticky dots and it doesn't look like any other Tissot seastar. I have noticed a lot of them surfacing on the bay all with re-finished dials and too good to believe cases maybe someone in india has a dial press and is churning out hundreds. Plus they are going for about £30 to £60 which seams alot seeing as I wouldn't  have paid more than £5 mine as a none runner so in conclusion I think its a frankenwatch any thoughts people.IMG_0335[1].JPGIMG_0340[1].JPG

  • Like 1
Link to comment
Share on other sites

6 hours ago, Cad101 said:

So today i'm wearing this Tissot or so it claims to be. I got it about a year ago cheap as a non runner of our friend the bay. I have no problems with the movement CHs Tissot & Fils 17 jewels cal 781 its just the repainted dial the fact that's its glue to the movement with sticky dots and it doesn't look like any other Tissot seastar. I have noticed a lot of them surfacing on the bay all with re-finished dials and too good to believe cases maybe someone in india has a dial press and is churning out hundreds. Plus they are going for about £30 to £60 which seams alot seeing as I wouldn't  have paid more than £5 mine as a none runner so in conclusion I think its a frankenwatch any thoughts people.IMG_0335[1].JPGIMG_0340[1].JPG

Is the movement legit?  If it is then I wouldn't worry too much as the watch looks really nice and will probably serve you well into the future.  Indian watch sellers on Ebay seem to be proliferating.  I often take a look at the Indian stuff made in the late 60s and 70s such as the ubiquitous HMT watches.

Link to comment
Share on other sites

Just now, Cad101 said:

Yes the movement looks legit just cant find the dial anywhere. But it runs well and it gets noticed so I cant complain really.

Well I reckon it looks very nice and the blue face is a real attention getter.  If you only paid a little amount for it then you win on both counts...you got a nice watch and a good price.  Heaven! <_<

BTW the dial looks as if it has been over-painted when you zoom the image up as I did using IrfanView.  BUT...to the naked eye it just looks like a marvellous and uniquely-coloured standard dial.

Edited by stroppy
Link to comment
Share on other sites

To me its not a cheap fake but somebody with an original movement has gone to an awful lot of trouble to fit a replacement dial. Don't believe the dial to be original as it seems to of been fitted with dial stickers. And a new case to boot. Its a nice watch.

Sent from my Lenovo YT3-X90F using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That black stuff - I had similar things happen with evaporust!  In that case I understand the evaporust eats the iron oxide away without hurting the metal but it can leave behind a layer of carbon which was in the steel that got oxidised. I spent ages trying to perfect a cleaning regime with various different stages in jars in an ultrasonic bath. In the end I switched to washing all but the balance and pallet fork in IPA and gently brushing it with a small artists brush.  I would estimate that I have found an extra 20º of amplitude doing this! It also takes me no longer than waiting hanging over a tank to move stuff to the next jar If it is really bad then I have used the IPA as a prewash and go through my old routine
    • I thought is FHF. Sounds good to make winding stem by myself but I am not in watchmaking on this level. 😄
    • At a friend's request, I've obtained a key for her long case clock which has been silent for some years. On winding it, the weight only rises a foot or so from the floor - & is not visible above the lower panelled section - before the key meets significant resistance. However it then runs quite happily for a day or so by which time the weight is again on the floor. I haven't had the chance to examine the movement but would be grateful for suggestions as to what might be happening here.
    • Despite having to change up your magnification and get your head into the super micro mech zone, I admit I'm not adverse to buying women's watches. You can finish up working on some good high end movements for a fraction of the price of men's. They also finish off that little black dress number and heels look on Saturday night outs. I would laugh but i have had some very odd Saturday nights out , ok go on then I'll laugh, i just made that up....ahem...😅
×
×
  • Create New...