Jump to content

Oil cups


teegee

Recommended Posts

Currently, I'm using the hard-plastic type of oil cup that has three reservoirs with one lid. Works fine, but is prone to scoring a bit if you stab them with an oiler.

Last month I did exams at the BHI, and they had very nice Bergeon metal agate-cup oilers with individual lids.

On ebay I found a Chinese version that seems OK -- but has anyone here used a set of these?

(This link is link is just one of many sellers with the same product, as usual)

https://www.ebay.com/itm/Black-New-Oil-Cup-Stand-with-4-Agate-Containers-For-Watchmaker-Watch-Repair-Tool/292568705943

Cheers!

     Rob

Link to comment
Share on other sites

3 hours ago, rogart63 said:

Bought mine from cousinsuk . Works okay. And is a little cheaper on cousinsuk . Have tested the Bergeon so have nothing to compare  with. Have a small red Bregeon with agate and that works fine. 

I have these as well and I think they are grate .....

  • Like 1
Link to comment
Share on other sites

3 hours ago, rogart63 said:

Bought mine from cousinsuk . Works okay. And is a little cheaper on cousinsuk . Have tested the Bergeon so have nothing to compare  with. Have a small red Bregeon with agate and that works fine. 

Bregeon is not a special brand. It's me that can't spell the to Bergeon :) 

Link to comment
Share on other sites

Great, time to get a set :)

Cousins is much more expensive at 35 UKP, plus shipping vs 28 USD including shipping on ebay. The proper bergeon one is 90 UKP, which is not even as much as I expected. The full metal one is 260 quid though, lol

  • Like 1
Link to comment
Share on other sites

  • 1 month later...

I do not recommend these.
I noticed small particles in the oil, and on closer inspection I saw that it comes from the hinges. When opening and closing, the hinges grind away paint and material that ends up in the oil.

But it is much nicer to use this kind of oil cups than the cheap plastic ones, so there is no going back now. I will invest in the original Bergeon version

  • Like 1
Link to comment
Share on other sites

Well, that didn't work out..  I received a set from China, and it turns out the cups are made of plastic -- some sort of nylon (see picture). That's even worse than the hard plastic ones I'm using at the moment. 

The seller clearly stated that they are agate cups and apologized for the incorrect description (probably just copied from another seller anyway).  Working out a resolution now, sigh. At least he's responsive.

So now I'm very hesitant to buy another set from ebay, since I don't want to run into this issue with another seller as well.

 

oil-cup-plastic.thumb.jpg.18380de5b44ec8489fc39baa643744b8.jpg

 

Link to comment
Share on other sites

On 7/17/2018 at 6:45 AM, teegee said:
Well, that didn't work out..  I received a set from China, and it turns out the cups are made of plastic -- some sort of nylon (see picture). That's even worse than the hard plastic ones I'm using at the moment. 
The seller clearly stated that they are agate cups and apologized for the incorrect description (probably just copied from another seller anyway).  Working out a resolution now, sigh. At least he's responsive.
So now I'm very hesitant to buy another set from ebay, since I don't want to run into this issue with another seller as well.

As I said, I'm not happy with mine either, so I would not get another from ebay. I found out after it was too late to file a complaint, so that is a loss for me.

In the end the real deal is probably a better value. I have one on the way.

Edited by jdm
Please don't include pictures in quoting
Link to comment
Share on other sites

2 hours ago, Halvis said:

As I said, I'm not happy with mine either, so I would not get another from ebay. I found out after it was too late to file a complaint, so that is a loss for me.

In the end the real deal is probably a better value. I have one on the way.

I have the hard plastic ones, have tested them with no problems. I did re-finish the concave oil recesses though. Works well for me. I do re-finish most watch repair equipment though to my satisfaction. Expensive screwdrivers and tweezers are an example and still need to be "touched up" to make spot on.

 

Link to comment
Share on other sites

I have the hard plastic ones, have tested them with no problems. I did re-finish the concave oil recesses though. Works well for me. I do re-finish most watch repair equipment though to my satisfaction. Expensive screwdrivers and tweezers are an example and still need to be "touched up" to make spot on.
 
My oil cups contaminate the oil. The hinges grind away paint and material that ends up in the oil. To remedy this is simply not worth the hassle (to me)
Link to comment
Share on other sites

1 minute ago, Halvis said:
35 minutes ago, ecodec said:
I have the hard plastic ones, have tested them with no problems. I did re-finish the concave oil recesses though. Works well for me. I do re-finish most watch repair equipment though to my satisfaction. Expensive screwdrivers and tweezers are an example and still need to be "touched up" to make spot on.
 

My oil cups contaminate the oil. The hinges grind away paint and material that ends up in the oil. To remedy this is simply not worth the hassle (to me)

No paint or hinges on mine !! Just cover caps.

Link to comment
Share on other sites

 the vintage oil cups are the best.  designed to be free of contamination.  either the high quality steel ( 3 hinged cups),  or the hard jewel single cups encased in wood.   they should be easy to find in "used tools for sale".    any contamination is not acceptable.  vin

Link to comment
Share on other sites

 the vintage oil cups are the best.  designed to be free of contamination.  either the high quality steel ( 3 hinged cups),  or the hard jewel single cups encased in wood.   they should be easy to find in "used tools for sale".    any contamination is not acceptable.  vin
I sure hope the modern Bergeon oil cups are free from contamination as well.
Link to comment
Share on other sites

A amusement with the link above eBay now makes recommendations as that item is no longer available. Of course the recommendation is the same item but side-by-side one seller claims agate which is slightly cheaper then the other seller claiming plastic then of course they all look identical

A problem with plastic is each time you insert the oiler in there's the possibility of scratching the plastic with little particles coming off with time. Then there's the long term consequences of oil and plastic? As we have zero idea of the chemical makeups of the plastics the oil is going to be sitting in their basically forever even if you do change it from time to time it's still long-term oil and plastic no idea what good and bad will come from that.

Personally what I use and like is the individual cups. These are the classic oil cups originally made out of wood and agate. Later generation ones like I have or more affordable is the agate is replaced with tinted glass to look like agate and much later ones the top is plastic rather than wood.  Then I like individual cups because typically I have quite a few different lubricants. Then with individual cups they can be moved right next to the watch makes it easy to see what you're doing.

  • Like 1
Link to comment
Share on other sites

11 hours ago, JohnR725 said:

Personally what I use and like is the individual cups. These are the classic oil cups originally made out of wood and agate. Later generation ones like I have or more affordable is the agate is replaced with tinted glass to look like agate and much later ones the top is plastic rather than wood.  Then I like individual cups because typically I have quite a few different lubricants. Then with individual cups they can be moved right next to the watch makes it easy to see what you're doing.

Interesting.. I wonder if I should try to get a few single cups instead. For rarer oils (like braking grease), it doesn't matter if it's in a 3-cup hard plastic oil pot. Old oil cups are not that easy to find though. 

For funsies, I had a look at Cousins. Single cup, glass wells, Bergeon is 14.50. That adds up quickly.   Single cup, plastic, A*F: 23.50. Wow..  

Perhaps I should just stick with 1.50 single cup Indian ones, and teach myself to stop stabbing chips off the cup wall :)

Link to comment
Share on other sites

  • 2 weeks later...
  • 7 months later...

I actually 3D printed some for myself.  Took an hour of sanding and polishing but they should serve okay until I can afford better. I originally wanted to make my own cups similar to that on clickspring, but I just can't find the little agate cups for less than buying the Bergeon ones.  Oil and all the related bits to go with oiling has so far been the most expensive part of getting into watch repair for me.

IMG_0997_small.JPG

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • H Watch Repairers—is there is a ‘standard format’ for the service marks or codes lightly engraved inside cases of pocket watches or wristwatches?   Sometimes I can see there might be a reference to year/ month but other times am confused. I’ve included an image of the rear of a 1951 Hamilton 992B Railroad pocket watch as an example. Thank you for all information you can give, Mike
    • Hi to Blackminou29–am a collector/ caretaker—good luck to you following your repair course—with hindsight I wish I’d pursued a career in both watchmaker/ jeweler fields—good luck with whatever career passion you engage.   Thank you Watchweasol for posting the amazing TZIllustratedGlossary! Best wishes, Mike
    • yes I noticed the new site and I miss the old site. It's the unfortunate problem of the Internet here today gone tomorrow sometimes some of the stuff gets backed up and sometimes well it does not then the problem with the early Seiko's were there were not necessarily designed for distribution across the planet and as such there is no customer support for them. So trying to find early stuff like technical information or sometimes even parts list for older Seiko is is problematic. But I did find you a you tube video. A quick look he seems to take a heck of a lot of time to actually get to the service single I did not watch all that but it does look like he did disassemble or started to say there's a tiny bit here  
    • RichardHarris123: Hello and welcome from Leeds, England.  I have family all over Australia, went as £10 poms Thanks Richard. Hope you’re able to visit your family here and that they’ve all done well 🙂 My relatives arrived from England in the 1790s transported on the ‘Second & Third Fleets’—a story of timber sailing ships, of convicts and doing well in this huge Country of Australia. When I visited the UK in the 1980s, I was too young to comprehend the depth and breadth of its history…  Best wishes, Mike William Chapman, my 4th great Grandad’s charges, at age 23 read at the Old Bailey; sentenced to 7 years of transportation to Sydney.
    • The whole process and the progress are closely observed, it's hand-driven and very controlled. I can't see the "danger", unless you are watching the TV while doing it. As you could have read, and in this quote "wheel" is the balance-wheel.
×
×
  • Create New...