Jump to content

Recommended Posts

Posted
On 28 August 2016 at 4:56 AM, ricardopalamino said:

I'm on Hawaiian time . Always fashionably late .....

Nice Rolex's,...all of them .

Very nice vintage watch indeed.

Posted

So today I started the day wearing my trusty Hema Landeron 248 Chronograph, which  showed you many times... Then in the office I decided to take out the very first watch that started it all: my late father's Seiko 7A34-7010...

chilling.jpg

  • Like 3
Posted
2 hours ago, tomprobkins said:

I am actually wearing it, but that is not a picture of my arm! Stainless Steel 1970's Bucherer Automatic - ETA 2824. 

28,800 BPH

Quickset date

Second Hack Feature!

1-IMG_1750.JPG

I was gonna suggest some Oil of Olay for your arm .  Nice watch . I see a Bucherer in my future .

 

Posted
7 hours ago, tomprobkins said:

but that is not a picture of my arm!

Ah! I relief and a disappointment. I've always wished I could meet Groot!:D

groot.jpg

Nice watch and movement!

Cheers,

Bob

  • Like 1
Posted

Today a Stauer I picked up cheap a while ago for £2 at a car boot serviced and cleaned and runs surprisingly well for a chinese auto. Trouble is i can only wear it for another 3 years as the calendar only goes to 2019. Btw everybody loves a bit of Groot.IMG_0569[1].JPG

Posted

A 2 quids complicated watch, legally acquired... is only possible in this millennium I think.

What a great occasion to learn with these, and why not, wear them as well!

Posted

This used to be my 'daily wearer', (back when I was gainfully employed!), my wife bought it for me at xmas some 12 or 15 years ago, it sits in the watch case until I notice the cell draining, then  back on the wrist or in the sun for a recharge, BTW its a E812 cal and fairly time consuming to get the thing set up, plating is slightly worn on bottom of brace, just how I like it.:biggrin:DSCF0317.JPG 

Posted
11 minutes ago, WileyDave said:

This used to be my 'daily wearer', (back when I was gainfully employed!), my wife bought it for me at xmas some 12 or 15 years ago, it sits in the watch case until I notice the cell draining, then  back on the wrist or in the sun for a recharge, BTW its a E812 cal and fairly time consuming to get the thing set up, plating is slightly worn on bottom of brace, just how I like it.:biggrin:DSCF0317.JPG 

It's in pretty darn good shape for a 12 to 15 year old watch .

Posted

Haven't worn this for a bit..

An early Rado..hard to date but probably from the late 70s, early eighties.

P_20160922_085614_MT.jpg

Not sure of the dial material as Rado used a lot of interesting material but its probably some sort of mineral. It has an iridescent effect in certain light, it also has a grain/striation similar to wood.

P_20160922_085921.jpg

Its a bit hard to photograph as most of the pics turn out like below!reflection.jpg

Still has its original Stellux bracelet with old style, non spring-loaded clasp.

bckle.jpg

Weekend is round the corner...!

Anil

 

  • Like 3
Posted (edited)

I've been absent for a few months, but have been soldiering on. Next to improving my leather craft skills, made some more Vostok Amphibians. All of them are serviced, modified and run with a beat-error of less than 0.5ms and a DR of max + 5 sec/day. 4x of the 2416b movements have been build from part of various other matching (scrap, 2nd-hand or new) movements like the Vostok 2409 or 2415.

Instead of featuring one watch every day, I worn and present them all today ;)

This 2416b movement in a Vostok 120 case has featured before, but has now one of my self made veg tan Nato leather straps.

PIC_4369.JPG

 

This Amphibian in a 420 case has one of the "reassembled" 2416b movements, it runs extremely good ;) Blue scuba-dude dial with matching bezel and Nato-strap.

PIC_4367.JPG

 

Here an Amphibian "Neptune" in a 960 case. Because the bracelet lugs on this case are special, the new, around $4, solid stainless steel eBay watch-strap had to be modified to suite the lugs....works very well and the strap is of amazing quality. The sun spoils the picture a bit, but still better than raindrops :biggrin:

PIC_4368.JPG

 

Next up is a "Ministry" (710) case, with 22mm lugs and military Nato-strap. A "single-dot" black bezel insert.

PIC_4375.JPG

 

This Radio-Room dial sits in a Komandirskie case with a hand-wound 2409 movement. Matching Nato strap. This watch needs some more tinkering. First to make it an automatic movement and I'm looking for the same black Radio Room dial, but with date window.......... hard to find :(

PIC_4389.JPG

 

Last one for today: an orange scuba-dude in a 420 case. Automatic 2416b movement with a black date-wheel at 6-o-clock. The leather-strap is not 100% to my liking, and will be replaced with a self-made one. The bezel is nice small and a bit more rare.

PIC_4377.JPG

Three more Amphibian are in the make. Still searching for the right & matching components.

That's it for today !

 

 

Edited by Endeavor
  • Like 5
Posted

Nice going Endeavor! I like the way they are modified and honestly, the straps all look good! How did you find the right bracelet for modification on the 3rd picture, 960 case? Did the seller list all the dimensions? I'm talking about the center where the "lugs" fit in.

Cheers,

Bob

Posted
2 hours ago, Endeavor said:

This Radio-Room dial sits in a Komandirskie case with a hand-wound 2409 movement. Matching Nato strap. This watch needs some more tinkering. First to make it an automatic movement and I'm looking for the same black Radio Room dial, but with date window.......... hard to find :(

PIC_4389.JPG

I like this "Umbrella Corp." Kommandirskie :)

Posted

Im not a fan of Russian watches but those.........droollllllll :D

Very nice selection with equally nice straps , i feel kinda bad not ever owned one now :)

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Well, my fundamental stance is that I want to go in and out without leaving any trace other than a shining, perfectly running movement. So, no scratchings on the inside of the case back lid, no marred screws, no debris, no fingerprints, and so on. That is, my goal is to make it impossible for the FBI to track me down. As a professional, I suppose you might want to keep track of returning watches, but as @JohnR725 mentioned, we can keep detailed computer records without marking the watch at all. That may not be true for every watch, but luxury and COSC-certified movements do have unique numbers. John also says it’s best to leave no sign you were ever there, and I couldn't agree more. Now, suppose the Sea-Dweller I'm working on is one day scrapped, and you want to sell the case-back separately (perhaps the case was destroyed in a plane crash). Then the scribbles on the inside no longer reflect the current movement inside the case. Also, the engraving will likely halve the market value of the case back. It had been "sleeping" for about a week and a half. Yes, the "debris/old lubricant" theory is my hypothesis as well! It will be interesting to see what I find once I have time to start disassembling the movement.
    • I've repaired a few of these, having some success with stripping and cleaning the mechanism.  They are so cheap though, its hardly worth the effort in many cases.
    • Get well soon Old Hippy, torn muscles.,  not good
    • Id love to see how he has the output shaft mounted to this setup, as I have the same rotary stage and stepper in my build.
    • If you see at least one thread protruding, or even a half, then you may have a chance using this "tool", but don't squeeze hard. Lot's of patience, and if you notice any signs of loctite or other adhesives, then apply several drops of acetone on top of broken stem. Use heat (hair dryer) also. You should be able gradually turn it counterclockwise, just like i did on this broken Timex stem, which was glued with something like nail hardener. Then you can use an extender to save your broken stem. https://m.media-amazon.com/images/I/513DVvkfW5L.__AC_SX300_SY300_QL70_ML2_.jpg   You can also try cutting a small grove / slot on top of the broken stem to use 0.7mm flat screwdriver.   Depending on the Crown material and Stem material, you can try dissolving the stem. 
×
×
  • Create New...