Jump to content

Dial (face) cleaning?


Recommended Posts

Probably is a no go Cunningham as Seiko tended to print on top of the varnish, you could try to carefully peel back a small area on the edge & see what comes with it. If the print stay in place you could try this http://watchguy.co.uk/cleaning-and-preserving-original-finish-on-dials/ although the results are somewhat variable.

Link to comment
Share on other sites

  • 2 weeks later...

Here's another I am working on at the moment (please excuse the not so good pics):

post-80-0-81303800-1433452013.jpg

Basically sound, no lifting varnish, but the usual age spots, blooms etc. Immersed into IPA & gently brushed with a sable brush for a couple of minutes, rinsed in distilled water for another couple of mins, then dipped in HG silver dip for a minute. Finally rinsed & dried:

post-80-0-69301300-1433452334.jpg

I would not suggest that this method is completely safe or will work every time, but the results have been good so far. Just don't try it on a friends Patek - particularly if he's a big barsteward! 

  • Like 2
Link to comment
Share on other sites

This is an interesting thread that you've started Jim. The car polish trick is credible IF you use very high quality product, designed to remove dirt, grease and dead lacquer without harming the finish.

The trick with the silver dip is something I shall try. To be honest BL, I think the watch looks better without the seconds track. Nice job!

Link to comment
Share on other sites

The trouble I have will dial cleaning is that there are so many methods, but for different kinds of dials. Some of them can cause harm if used on the wrong type. Fortunately I have plenty of junk ones to practice on!

One method I've just used for the first time is the pencil eraser. I had a plain white dial, not lacquered, with black printing in good condition but very grubby. I gave it a try around the edge first, worked my way in and now it looks as good as new.

Stephen

Link to comment
Share on other sites

  • 2 weeks later...

So, I've been using Klasse All in One for years and I figured what the hell and decided to try this on an old ~1971 Bulova Whale dial that had a lot of issues, I can post pix from my camera later.  I tried the All in One on part of the dial with lots of varnish pitting and peel and was amazed how shiny and amazing it looked, figured I would try the print area with only a little effort.....     Oh, No! with little to no effort there went the whale tail!  Clearly the print was on top of the varnish  :pulling-hair-out:       So I stopped for the evening and had a lovely 3% Irish Stout- Thank God for Beer.

Link to comment
Share on other sites

  • 2 weeks later...

Thanks for the silver dip tip Blacklab - I've thought about that a few times but wasn't sure what it might do to painted markers. I bought my wife an old Bulova with a silvered dial and had also wondered about that silver plating solution you can buy. Anyone ever tried that?

I had good experience with IPA the first few times I tried but I stopped using it after it softened the lacquer on an old Seiko.

S

Link to comment
Share on other sites

Bought this chronostop 146.012 off ebay. But before I send the dial to be restored, as soon as I'm back from Turkey I'm going to give it a go with the car polish trick. Any thoughts? 306230e067b2563d0eeebe376344117a.jpg

Sent from my GT-I9505 using Tapatalk

Link to comment
Share on other sites

The only thing I've used so far is rodico. It really only cleans dirt and doesn't get extreme like some of these shown. As stated, there are too many changes of ruining the wrong dial.

Even with radico you have to be very careful so as not to pull the transfer off. Reading some of the ways people clean dials I'm lost for words. If a dial was in such poor condition I would have it restored.

Link to comment
Share on other sites

Even with radico you have to be very careful so as not to pull the transfer off. Reading some of the ways people clean dials I'm lost for words. If a dial was in such poor condition I would have it restored.

Hardly worth spending £100 on dial restoration when the watch is worth less than that, also I notice that most restorations are rarely the same as original - wrong fonts being the most common problem.

Link to comment
Share on other sites

  • 4 months later...

A puffer lens brush works well, more stubborn marks can be removed with saliva or mild detergent on a cotton wool bud or Rodico, but as Geo says be very cautious. I have had success on basket case dials with lighter fluid and silver dip but I only use these as a last resort.

 

Quite agree Frenchie, a polished or replacement crystal will make all the difference.

 

Dial restorations can be very good, although they are not normally exactly the same as the original. Also it costs in excess of £100.

Link to comment
Share on other sites

My source of dial cleaning saliva is my mother-in-law...false teeth, etc...you get the picture...just give her conversation and insert the dial in the middle of a phrase...works like a charm. Now don't make her angry or she will spoil the dial!   :)

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Thanks everyone for the replies. It seems setting the hand is a bit of a guessing game, and I thought there would be a very specific way to do it. Since the reserve indicator hand moves clockwise as the spring is wound, I tried setting it right at the start of the black side. But setting it there doesn't really make sense, because by the time the spring is halfway wound, the hand is only at the end of the red side... In my head halfway wound shouldn't mean the hand is still "in the red."
    • Lovely part of the country! I spend most of my days driving along the A64 for work in and around York. I'll be sure to drop plenty of questions soon! I've actually got a couple of watches on the way that I'm pretty sure I'll need some help with! They look pretty beat up from the pics but I love a challenge and an excuse to buy more tools 🤣
    • I have two of these in my home. You need to remove the movement from the case, take off the hands and remove the dial and take a few good photos of the front plate so I can see what the problem is. The round nut unscrews and the hands pull off pull them off from the center and not the tips as you could break them. 
    • I asked the question of one of the sellers. Its for removing the pins and making the holes in motorbike drive belts. God knows why they were both in two seperate joblots of watchmaking tool, thats bizarre. I haven't posted your setting lever steel yet mike, been busy with my mum past few days and had a locked myself in at home lazy watch repair day today 🙂 but I'm out tomorrow so i will get it off to you then. 
    • Hi everyone, I tried looking for answers on this online but came up with nothing, so I'm hoping some of you knowledgeable people might be able to help. I have an Elliot clock that has been in my family for at least 4 generations. I recently enherited it, and I'm trying to get it to run properly again, as it's been neglected a bit.  Here,s the problem. These clocks have a silencer mechanism, which is supposed to stop it from chiming between 11PM and 7AM but for some reason mine is silent between 1AM and 9AM. I have tried figuring out how to adjust it but have not managed. Does anyone have any idea on how to correct this? Please find attached some pictures of the clock. Thank you!
×
×
  • Create New...