My First Test Dial Printing...i'm Over The Moon!
-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
Posts
-
By HectorLooi · Posted
We still need to know what the movement is inside, then we can advise you. The calibre number is usually stamped under the balance cock. -
I'll give it a try an let you know 😅 I've accumulated quite a few lubricants for that reason... but in this particular case I'm a bit hesitant. Yea, I really wonder. What's interesting, is that for calibre 918 (introduced in 1994), which seems to have the same rotor construction as the 916 (introduced in 1969), JLC recommends "immersing [the oscillating weight] in a mixture of benzine and 0.02% D5 oil" (is that basically what Lubeta V106 is??). So they didn't stick to 941..
-
By rjenkinsgb · Posted
Interesting movement! These appear to be similar ones on ebay, in somewhat better condition, if you need spares? https://www.ebay.co.uk/itm/294082407812 https://www.ebay.com/itm/335367737161 This video shows how to make a simple and reasonably safe rust remover - the recipe is in the video description. I've used it on various things with great success! -
A 1oz should be about right for most work. I had 4 all different as I was also a clock maker. I also had a box wood mallet.
-
Recommended Posts