JerseyMo Posted May 13, 2020 Share Posted May 13, 2020 When I spotted this watch listed on eBay my first thought was what is going on with the crown. Its all wrong and I'm sure there is going to be signs of water damage inside. It did not disappoint there but the end result turned out great. That is just what I found and did end up replacing the movement . I began with a breakdown and inspection. Movement has seen better days and not worth the effort. So it gets replaced. Now the cosmetics - and there it is on the left along with the other 600 ft divers. 7 1 Quote Link to comment Share on other sites More sharing options...
watchweasol Posted May 13, 2020 Share Posted May 13, 2020 Well done Mo another saved from the grim reaper. Quote Link to comment Share on other sites More sharing options...
JerseyMo Posted May 13, 2020 Author Share Posted May 13, 2020 27 minutes ago, watchweasol said: Well done Mo another saved from the grim reaper. yes but, this one did spend some time in purgatory !! What I liked the most from this project is how nice the hands came out. I mixed white and yellow nail polish to match the tone of the hour marks. Quote Link to comment Share on other sites More sharing options...
GomBoo Posted May 15, 2020 Share Posted May 15, 2020 (edited) Hi Mo.... Look what arrived today....Thanks for the heads-up. GB Edited May 15, 2020 by GomBoo 1 Quote Link to comment Share on other sites More sharing options...
JerseyMo Posted May 15, 2020 Author Share Posted May 15, 2020 22 hours ago, GomBoo said: Hi Mo.... Look what arrived today....Thanks for the heads-up. GB many thanks..... 1 Quote Link to comment Share on other sites More sharing options...
billings389 Posted September 4, 2020 Share Posted September 4, 2020 Hi guys. I'm new to the forum. I love these vintage Timex divers. I've got one from 1970 that's the 200 ft version. I'm trying to figure out how to repaint and fill in a hand that the lume/paint has crumbled off over the years. I read where jerseymo used nail polish. Does that actually fill the void created by the decayed lume or do you have to add anything else to give it some structure? Thanks in advance for any knowledge you can send my way. Take care Quote Link to comment Share on other sites More sharing options...
watchweasol Posted September 4, 2020 Share Posted September 4, 2020 Hi and welcome to the forum. JerseyMo is the foremost expert on timex. There are lume kitson Ebay watchlume.com these come in various colours and different price ranges. basically the choice is yours. Quote Link to comment Share on other sites More sharing options...
JerseyMo Posted September 4, 2020 Author Share Posted September 4, 2020 (edited) 8 hours ago, billings389 said: Does that actually fill the void created by the decayed lume or do you have to add anything else to give it some structure? yes, it works as you can see it was used in this project. The gap on the diver hands are larger than most so the process may take more than one application. You must also take care not to lay on to much at once. This is true no matter which material you use to relume with. Edited September 4, 2020 by JerseyMo Quote Link to comment Share on other sites More sharing options...
billings389 Posted September 4, 2020 Share Posted September 4, 2020 Thanks so much for the reply. I'm going to give it a shot Quote Link to comment Share on other sites More sharing options...
JerseyMo Posted September 4, 2020 Author Share Posted September 4, 2020 23 minutes ago, billings389 said: Thanks so much for the reply. I'm going to give it a shot be sure to post pics - Quote Link to comment Share on other sites More sharing options...
mrjeff680 Posted September 11, 2020 Share Posted September 11, 2020 On 9/4/2020 at 10:10 AM, billings389 said: Hi guys. I'm new to the forum. I love these vintage Timex divers. I've got one from 1970 that's the 200 ft version. I'm trying to figure out how to repaint and fill in a hand that the lume/paint has crumbled off over the years. I read where jerseymo what watch does trump wear used nail polish. Does that actually fill the void created by the decayed lume or do you have to add anything else to give it some structure? Thanks in advance for any knowledge you can send my way. Take care i have also got the same watch form one of an online store, they also offer to paint your watches and other maintenance, you are always welcome! Quote Link to comment Share on other sites More sharing options...
billings389 Posted October 18, 2020 Share Posted October 18, 2020 Hi. Do these late sixties Timex Skindiver watches have radium on their dials? Thanks in advance and take care all Quote Link to comment Share on other sites More sharing options...
JerseyMo Posted October 19, 2020 Author Share Posted October 19, 2020 yes, why the question? Quote Link to comment Share on other sites More sharing options...
billings389 Posted October 19, 2020 Share Posted October 19, 2020 Well, doesn't that make them dangerous to handle and work with? Quote Link to comment Share on other sites More sharing options...
billings389 Posted October 19, 2020 Share Posted October 19, 2020 I've got a few I'm thinking about tinkering around with and I was wondering what my risk of exposure to radium would be. Quote Link to comment Share on other sites More sharing options...
HectorLooi Posted October 19, 2020 Share Posted October 19, 2020 I'm no expert in this matter but I think with the quantities involved, the risk should be minimal. As long as common sense is used. Don't flick the old lume off and create a radium cloud. I put a drop to glycerine on the hands to entrap all the particles that may fly off. Work on a clean table top with no clutter. Spread old newspaper if you are really worried. The question is how do you dispose of the rubbish after that? Do you call your local radioactive waste contractor? Do you dump it in your general rubbish? Shhhh.... Quote Link to comment Share on other sites More sharing options...
Tudor Posted October 19, 2020 Share Posted October 19, 2020 Just don’t breathe it. Quote Link to comment Share on other sites More sharing options...
JerseyMo Posted October 19, 2020 Author Share Posted October 19, 2020 Of course it is still up to the individual to decide but, I usually reply not to "Lick" the dial. From the many times I've seen this question asked the general replies are there is more radioactivity surrounding you each day than there is on the typical dial. So don't be concerned. Even on of biggest horological foes with whom I had many intellectual dialogues with ( a nice way to say we butted heads) actually agreed with me on this one! So I offer you what I have to others. "You get in a Timex 600 ft diver and I'll gladly hold on to it for you until the half life of the radium has halved!" Just some northern New Jersey humor there! "What you got a problem with that?" see I did it again. 2 Quote Link to comment Share on other sites More sharing options...
billings389 Posted October 19, 2020 Share Posted October 19, 2020 Okay, thanks for the reply. That's reassuring. I guess I'll "fuggedaboutit". Thanks and take care Quote Link to comment Share on other sites More sharing options...
JerseyMo Posted October 20, 2020 Author Share Posted October 20, 2020 exactly! Quote Link to comment Share on other sites More sharing options...
Tudor Posted October 20, 2020 Share Posted October 20, 2020 Wear gloves, which is a good idea anyway, to keep fingerprints off the parts. Maybe wear a mask? You have a better chance of being struck by lightning, right after collecting your lottery winnings, than having a health issue attributable to the material applied to a watch dial 60 years ago... 1 Quote Link to comment Share on other sites More sharing options...
PastorChris Posted January 28, 2021 Share Posted January 28, 2021 On 10/19/2020 at 7:32 PM, JerseyMo said: Of course it is still up to the individual to decide but, I usually reply not to "Lick" the dial. From the many times I've seen this question asked the general replies are there is more radioactivity surrounding you each day than there is on the typical dial. So don't be concerned. Even on of biggest horological foes with whom I had many intellectual dialogues with ( a nice way to say we butted heads) actually agreed with me on this one! So I offer you what I have to others. "You get in a Timex 600 ft diver and I'll gladly hold on to it for you until the half life of the radium has halved!" Just some northern New Jersey humor there! "What you got a problem with that?" see I did it again. I'm sorry, but I could not help but correct your spelling. the correct spelling is,"You gat a problem wit dat?" Unless you are from the NW part of the state, but in that case, you might not be able to operate an internet. LOL ONLY KIDDING. A serious question for a new watch fettler who fondly remembers his very first watch, a Timex. Are working replacement movements for these watches reasonably available? It seems like it would be a good entry point for someone who wants to try some restoration work, like you have done, but does not have the skills to tear down a movement and service it. Quote Link to comment Share on other sites More sharing options...
JerseyMo Posted January 28, 2021 Author Share Posted January 28, 2021 1 hour ago, PastorChris said: I'm sorry, but I could not help but correct your spelling. the correct spelling is,"You gat a problem wit dat?" Unless you are from the NW part of the state, but in that case, you might not be able to operate an internet. LOL ONLY KIDDING. A serious question for a new watch fettler who fondly remembers his very first watch, a Timex. Are working replacement movements for these watches reasonably available? It seems like it would be a good entry point for someone who wants to try some restoration work, like you have done, but does not have the skills to tear down a movement and service it. "Minchia" like a true New Jerseyite you come in with an attitude. Vintage Timex parts are only available from leftover stock that may been stored by a watchmaker or repair centers. These parts have made their way to online auction sites, flea markets or other such palces. So even if you find a replacement movement it has been sitting idle for decades and will need to be serviced anyway. What separates vintage Timex from the traditional jeweled movements is that they do not have to be fully broken down to be serviced. I and many others have posted the how to steps to service a vintage Timex. There are even a few videos on YouTube. Of course none of these videos were made by me so they are sub par in my opinion. <<< "just displaying my Jersey attitude there". What watch are you working on or thinking of working on? 1 Quote Link to comment Share on other sites More sharing options...
PastorChris Posted January 28, 2021 Share Posted January 28, 2021 (edited) 16 minutes ago, JerseyMo said: "Minchia" like a true New Jerseyite you come in with an attitude. Vintage Timex parts are only available from leftover stock that may been stored by a watchmaker or repair centers. These parts have made their way to online auction sites, flea markets or other such palces. So even if you find a replacement movement it has been sitting idle for decades and will need to be serviced anyway. What separates vintage Timex from the traditional jeweled movements is that they do not have to be fully broken down to be serviced. I and many others have posted the how to steps to service a vintage Timex. There are even a few videos on YouTube. Of course none of these videos were made by me so they are sub par in my opinion. <<< "just displaying my Jersey attitude there". What watch are you working on or thinking of working on? I found a few of those threads as I continue to leader my way around the forum! Nothing in the pipe at the moment, I am kind of in search of my next project. I am getting ready to bite the bullet and make the investment in proper lubes and then that will open things up for some simple moment work. I saw a thread here on some old Timex 600 diving watches and trying to find something like that to play with would be fun LOL; maybe a bit of cleaning, polishing, re-luming hands and such then some movement work. For me it is the search and journey and satisfaction of a job well done rather than looking for another watch to wear. Edited January 28, 2021 by PastorChris Quote Link to comment Share on other sites More sharing options...
JerseyMo Posted January 28, 2021 Author Share Posted January 28, 2021 agreed the fun is in knowing you completed the task is the true reward. You don't need much to get started with vintage Timex. Just search eBay for vintage Timex lot and there are plenty to be had. They do not require any fancy or expensive setup to get started with. Know that if you get hooked in to the hobby your work area will start to look like this before you can say "Saltpepperketchup" when ordering an egg and cheese with Taylor ham on a Kaiser roll. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.