Jump to content

First time lumed dial..


Recommended Posts

I'm very satisfied with how this dial turned out. I'm building and Elgin pocket watch conversion into wristwatch and wanted a vintage military dial look. 

I had recently purchased a lume kit but hadn't had the chance to use it yet. I design the dial with bold outlined numerals for the purpose of filling with lume. It really turned out better than I ever hoped!

The first dial I did turned out very acceptable, except that I had another issue with it and had to start over. I learned quite a bit just from doing that one dial.

Once I had the printing plate made I repainted the original Elgin dial to a flat white. I then Inked the plate and printed the new dial. Once everything was dry I then slowly added the lume using a 100 - 0 paintbrush which is about the size of a watch Oiler. I went around the dial 4 times adding a layer little by little. I'm very surprised just how much Lume this process adds. The markers have a nice three-dimensional heft to them...

IMG_20170812_213625.jpg

IMG_20170812_213129041_HDR.jpg

IMG_20170812_214600436_HDR.jpg

IMG_20170812_213512.jpg

Edited by DJW
  • Like 11
Link to comment
Share on other sites

I will try to put together a walk-through of the process of dial printing along with creating the plate itself. Honestly I spend more time on the computer designing the dial layout then it takes two create the actual plate or print the dial.:wacko:

 

IMG_20170813_165330.jpg

IMG_20170813_165420.jpg

IMG_20170813_194608.jpg

  • Like 5
  • Thanks 3
Link to comment
Share on other sites

  • 1 month later...
  • 5 months later...
  • 2 weeks later...
Yes!!! I've been wanting to that to make dials for the Chinese movements that seem to not have any unless you but some brand that uses the dial. I know they have number stickers but if I could design my own I would simply be in heaven!

Hi again DJW, if it makes life easier for you, do you have a suitable link to a website which explains the dial printing process please? As you might have noticed, the natives are restless and want to know more[emoji6]


Sent from my iPhone using Tapatalk
  • Like 1
Link to comment
Share on other sites

20 minutes ago, Deggsie said:

Hi again DJW, if it makes life easier for you, do you have a suitable link to a website which explains the dial printing process please? As you might have noticed, the natives are restless and want to know moreemoji6.png

It's nothing secret, but beside the printing "machine" itself, the need to use a precisely engraved plate places the job largely outside the domain of the average hobbyist and even professional watchmaker  I think that if you can find someone that makes the plate on your design, or are willing to spend pretty good money on a CNC machine that does that, you could be game. I don't know if 3D printing would do a good enough plate. Fact is, at the present time dial making/reprinting specialists are rare.

 

Link to comment
Share on other sites

  • 3 months later...

This is incredible! Awesome job! I have the same movement I've been trying to figure out how to do the dial forever. I've thought about the whole water slide decals, having vinyl made, trying to have someone hand paint it, nothing is ever as nice as the real deal like you have. I bow at you completing a project I've only begun to think about! It's beautiful.

Sent from my Moto E (4) using Tapatalk

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • This seems to be complicated case... We have many variables here and we need to exclude some of them to make some progress. We have plots that show amplitude variations, but we don't know if this variations are significant, as they can be 'amplified' or 'smoothed' by the software. So, some observation of the amplitude by eye will be of help. Then, if we really have not isochronical work, then the main reason for this would be the hairspring being not 'linear'. And not linear may be sometimes not only because 'touching', but because bad hairsping material structure. Some of the advanced watchmakers claim that repairing badly bent hairspring is useless, because this springs will never be isochronic again.  Well, my own observations are that such thing happens, but not in all the cases and it depends on the case if the result is acceptable or not. I will not suppose here that this spring has been repaired, but it has some strange behavior watching at it's work. It will be good if it is possible to test the movement with another balance or thest the balance on another movement...
    • The more common Jewel hole diameters are from about 0.07mm to 0.50mm. Those are the sizes in the Seitz jewel gauge tool.
    • Hello and welcome from Leeds, England. 
    • OK, several things to say here. The thought thay if with the old spring the movement works 16 hours, then replacing the spring will solve that - is totally wrong. With a new spring the movement probably will work for 17 hours. The power reserve is practically not reduced when the spring gets weak with the age. It is rather something wrong with the movement. As You worked on the hairspring, we need to  confirm that it is OK now before everything else. So, thake the lever out and do the free oscillations test. What is the result? I expect numbers, not only 'it is good' or 'it is not good'. Then, this is no jewels pin lever movement, so this is not unusual to have not well regulated or even worn escapement, this is the main reason that this kind of watches doesn't work as long and reliable as the jeweled escapement ones. You can find many of them with no wear at the crown and case, and this is because they stopped working normally pritty soon after purchase.
    • Welcome 🙂 Inherited watches are very tricky. Some of them, or all, do have sentimental value, perhaps not to you but perhaps to others in the family. Ruining them doesn't make you popular. Start on innocent watches who do no harm, not to your wallet nor to others 😉 BTW; for in the future it would be helpful to others to mention your location in your profile. Success 🤗  
×
×
  • Create New...