Jump to content

Watch of Today


mk3

Recommended Posts

On 1/1/2020 at 8:24 PM, Hammilton said:

My new Princeton chrono w/ Landeron 149 movement, my first vintage chronograph.  Working great but the movement isn’t secured well making it hard to set.

B15121F9-7302-4F00-8230-FD63A8BDD195.jpeg

I have one of this type of vintage chronograph on my grail list. Looks like a slide-rule for your wrist. Handsome watch!

Link to comment
Share on other sites

12 hours ago, FLwatchguy73 said:

I have one of this type of vintage chronograph on my grail list. Looks like a slide-rule for your wrist. Handsome watch!

It wasn’t very expensive, not in the grand scheme of things anyway.  I paid 215 for it, and it’s running good.   Someone’s selling a similar Clebar with a bit more patina that I wanna grab next, though I really want a seamaster, and every other watch I buy just delays that. 


when I got it I they sent a few extra straps, I’m not a NATO fan so I didn’t own any, but it came with this blue and red one that works perfect with my cubs hoodie and cap, and matches the red in the dial.
 

last night I won a lot of 35 various Swiss movements that are supposedly all together.  They’re my practice!  This morning was my first ever tear down, a broken Vostok I’ve had for many years now.  Turned out the balance spring was broken. Now I’ll try putting it back together. It doesn’t have to work so there’s no pressure lol.

EF1E0309-8A2F-4EF8-8F95-8872DB003A63.jpeg

  • Like 2
  • Thanks 1
Link to comment
Share on other sites

18 minutes ago, Cliff said:

Love those orange dials, going to have to  buy one! I've seen some beautifully restored ones on ebay with the smaller case size.

My mid-size (SKX017), please excuse the poor picture.
I love to go everywhere with it, including underwater to the limit of my recreational certification.

P7193125.thumb.JPG.5931942a004569e2a8f990de046bc35d.JPG

  • Like 1
Link to comment
Share on other sites

On 1/7/2020 at 10:33 AM, FLwatchguy73 said:

Don't know much about this brand but from the looks they're somewhat of a Seiko homage brand. This is their take on the Turtle. It has a NH35A heart beating inside. 

20200107_102522.jpg

Hmm nice..I think off brands are fine.provided they  are properly  done.it looks to be a moderately  pricey smaller  brand..

Edited by yankeedog
  • Like 1
Link to comment
Share on other sites

Picked up this vintage Seiko 7T32-7C30 chrono,Panda dial from 1997 on the cheap from my pawn shop rounds. It had a nearly dead battery and very sticky buttons. Most of the functions were inoperative because of the power saving features of a low battery.  Got it home and opened it up and found that a previous owner had tried to jam the back cover on without aligning the pushers and the corresponding notches on the cover and had pinched the pusher tubes. After disassembling and cleaning I straightened out the pinched tubes, placed a new battery and shorted the reset pin to the batter per the manufacturer. everything is running perfectly,  including the alarm. Now all it needs is a new crystal. 

20200112_112918.jpg

Edited by FLwatchguy73
  • Like 1
Link to comment
Share on other sites

3 hours ago, yankeedog said:

Looking  like  the  stray dog that followed  you home,is  this 21 jewel  seiko powered westclox.

20200112_210740.jpg

I have a number of stray dogs, all waiting for a bone. That one of yours has been scratching its face rather a lot, maybe you could try some flea powder. :P

Link to comment
Share on other sites

This one just showed up (actually had two watches I’ve been waiting a month on, from different sources, show up on the same day!) so it’s getting my wrist.  A little too classy with the nice alligator and leather lined strap for wearing with a hoodie and jeans, I’ll have to change before I go out lol!  I love this watch though, the gold is in really good shape for the most part and the dial is immaculate.  Just serviced, too.  Hard to beat for 150 bucks!  I haven’t had the chance to figure out how to set the alarm yet but I’m looking forward to hearing it.  
 

(no, my wrist isn’t trying to eat that strap, I must have held it at an awkward angle or something it’s actually too loose right now!)

58D4CBA9-65DF-4BE5-804C-F9C570B133E2.jpeg

  • Like 2
  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I also find the red oiler in this set the most versatile size, but for cap jewels, I’ve found that the finer, Bergeon ergonomic oiler, 7013-N, gives me greater control over the amount of oil I’m depositing and gives me a more consistent drop size.  The yellow oiler is great for use as a probe - nudging pivots into place etc.  I’m about to file one down into a tiny tool to move the collet in adjusting beat.  Very handy, just too chunky to use as an oiler. 
    • I switched to naptha a while back for that very reason, i only use alcohols for rinses now. 
    • Hi all - I am working on a Langendorf pocket watch movement which needed the lower balance hole jewel replaced. This is my first time reaming, measuring, ordering a new jewel and I need to check with you experts if I made a mistake in ordering or if ofrei made an error in selecting the jewel they sent me. I did a load of research to prepare for this repair. I reamed the hole up to a reamer measuring 1.19mm and my pivot measures 0.11mm. I ordered a convex olive hole balance jewel 12/120. I received the jewel in an envelope hand written 12/120. When I went to press in my jewel, it fell straight through the hole with ease. I measured it with the most accurate equipment I have and I am getting 1.00mm. So my novice question for you today is did I misunderstand the measurement and ordering or did the vendor send me the wrong diameter jewel at 100 instead of 120? Another way to ask this stupid question is should a 120 jewel order measure 120 or did I miss a detail?
    • I measured the width at 2.05mm. The smallest wrench I have found so far is 2.5mm.     Just found that the imperial set has a 5/64” which will be just a tiny bit too small but a file should be able to fix that  
    • Yes all broaches are tapered, without the tapered length they would not broach evenly and the tapering does vary. Minimum to maximum broaching out sizes are quoted per broach.
×
×
  • Create New...