Jump to content

Unusual Rolex

atimegoneby
 Share

Recommended Posts

atimegoneby Super WRT Addict

atimegoneby

Posted
Posted

Whilst looking on the net I came across an unusual vintage Rolex, the top half of the dial has Roman numerals while the lower half has Arabic !  with a seconds subdial at 9 o'clock,

wonder if anyone knows of this watch ?

I have a picture but not sure if it contravenes copyright if I post it ?

Link to comment
Share on other sites
martinluth123 New Member

martinluth123

Posted
Posted

Don't know. How ever my favourite is explorer. Its features are amazing. The Explorer’s Oyster case, guaranteed waterproof to a depth of 100 metres (330 feet), is a paragon of robustness. Its characteristically shaped middle case is crafted from a solid block of particularly corrosion-resistant 904L steel. The fluted case back is hermetically screwed down with a special tool that allows only Rolex watchmakers to access the movement. Fitted with the Twinlock double waterproofness system, the winding crown screws down securely against the case. The crystal is made of virtually scratchproof sapphire. The waterproof Oyster case provides optimum protection for the Explorer’s high-precision movement. I have some good work experience with a OOH ERP and my words are clearly based on what I felt through such processes in the past.

Link to comment
Share on other sites
Marc Distinguished Member

Marc

Posted
Posted

This style of dial is know as a "California" dial and a number of manufacturers have used it at times.

There are various stories regarding both the origin of this style and the name, 5 minutes googlefoo turns up lots of info and pics.

The sub dial at 9 suggests that it has a pocket watch movement in a wrist watch case, I believe that Rolex did make an Oyster pocket watch which may have played a part in the evolution of their first dive watch.

  • Like 1
Link to comment
Share on other sites
wls1971 Distinguished Member

wls1971

Posted
Posted

It's a pocket watch conversion so the dial is a redial and not original it may or may not have a Rolex calibre based on a cortebert ebauche. As a watch its as bogus as a bogus thing from the planet Bogus. Straight out of Poland or Bulgaria these things are usually advertised as of military origin. I think the only Rolex produced military watches with this kind of dial would be a Panerai produced for the italian navy.

 

  • Like 1
Link to comment
Share on other sites
bobm12 Distinguished Member

bobm12

Posted
Posted

It doesn't look like a real Rolex but I like the "vintage" style of the lume (nice aging color, hands and dial) and the general appearance trying to convey some Rolex-ish presence. Other than that, I don't think anyone will take it seriously as a Rolex, not being their style. Again, I might be wrong and if so, it might command a respectable amount of money for being one of a kind...I guess!

On the other hand, I wouldn't be surprised to find inside a Chinese 6497 clone! :)

Cheers,

Bob

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Chief
      Intro

      By Chief · Posted

      The Boro has changed quite a lot over the last 20 years, and not for the better. I actually moved out of the town 15 years ago to a small village not far away. Thanks for the pdf! Looks a great read. I'll get it printed today and put it on my work bench!
    • Endeavor
      New balance staff not riveting to balance

      By Endeavor · Posted

      Not having all the fancy equipment, this is a way I came up with. I never said it was the best, the most ideal or the safest way. Working on balances is always a delicate task whereby full concentration & common sense should prevail. I was well aware of the "dangers" / short comings involved, hence my "warnings", as quoted above. The balance wheel of the Omega was nice true, flat and one could clearly see how much gap there was left before the grinding wheel would touch the balance wheel. I stopped when the generously applied diamond paste started to touch the rim of the balance wheel, which turned out to be with a seat thickness left of 0.1mm. Tapping the remainder of the staff out went easy and flawless. My idea of penning this article was to show/share a way which, in my case, perfectly succeeded. If deemed to risky, or if the balance wheel is not true or has a wobble, other methods have to be followed.
    • Neverenoughwatches
      Seiko 6601 Tech Sheet?

      By Neverenoughwatches · Posted

      I loved his explanation of a teardown 😅 Ex military Richard Perrett, pretty knowledgeable guy.
    • praezis
      New balance staff not riveting to balance

      By praezis · Posted

      I also see a bit of danger for the wheel, at least you have to keep away from it and may get a too thick rest ring. My rest rings are about 0.05 mm. Better way would be a grinding wheel touching the staff with its circumference. Frank
    • Neverenoughwatches
      Stem broken - can it be rescued?

      By Neverenoughwatches · Posted

      Not easy to find this one everywhere,  so it depends where you are located. Joining it back together might be possible, i have silver soldered mild steel before even with traditional plumbers lead and its a pretty strong joint, but bere in mind this is only 1mm diameter.  The join would need to be very accurate,  it not something i have heard of anyone trying before. The part no 401 is the swiss code number and relates to watch winding stems in general
×
×
  • Create New...