Jump to content

Just look at this rubbish


oldhippy

Recommended Posts

Today I thought I'd pop over to good old ebay and have a look to see what was about in antique clocks. They never disappoint me because I can find rubbish which sellers try to palm of on people. 

This is todays find and what salesmanship it comes with. Tell me what you think is wrong and if you are right you win a peanut.:D

http://www.ebay.co.uk/itm/Beautiful-Antique-French-Surpintine-Mahogany-Inlaid-8-Day-Mantel-Carriage-Clock-/191905214083?hash=item2cae712e83:g:xmUAAOSwGIRXbVWx

Link to comment
Share on other sites

8 hours ago, wls1971 said:

My guess is the platform escapement is a Swiss lever and far too modern for a antique clock so the sellers claim that the clock is all original is untrue ( a blatant lie actually ).

You are correct.:Bravo: There is more.

Link to comment
Share on other sites

Nice quizz! :)   I didn't even know there was such a thing as a mantel carriage clock. I thought this looked like a conversion from pendulum to carrriage (the mantel case can support a pendulum I guess), but there's no hole for a pendulum to pass through in the case cylinder. Is that carriage original?

How is this thing wound btw? With the big square arbor on the back?

Link to comment
Share on other sites

I have just emailed the seller with this. I'll let you know what his reply is, I bet there not pleased.:D

 

Why haven't you mentioned that the platform escapement is a replacement there for the clock isn't an antique as you have stated. You need to change this description immediately it's a false description and I'll instruct ebay if it's not changed A S A P.

 

Link to comment
Share on other sites

I don't think for one minute this is a French movement.

Hands are not fitted the way I would expect with a nice hand collet and pin. It looks like a modern nut.

Platform escapement looks modern and not very good the colour is also two modern.

What gives it away is the back plate. Oil sinks very shallow almost none existent. The righting is inconsistent and that arrow for the hands is so wrong it's not nice and its far too big. The screws are modern and incompatible.   

Is it from ebay?

Edited by oldhippy
  • Like 1
Link to comment
Share on other sites

1 hour ago, szbalogh said:

Thank You for the informations!

No, its just a guys clock on another forum asking for the value. O dont know much about clock so i promised for him to ask a professional clockmaker ;)

It also looks poor quality brass going by the back plate.  

  • Like 1
Link to comment
Share on other sites

The answer to my original post.

It's what is called a marriage, a clock movement is put into another case very popular with Longcase clocks, many of you know these clocks as grandfather clocks.  

The case is fine looking and it has the correct description.

The movement comes from a different case and is what is called a drum fitting movement.

What gives it away is as clockboy said the dial and hands, if you look carefully the fitting of the hands is incorrect they should be held with a collet and pin, not a nut, the centre wheel has been altered to fit the dial, hands are bad they are modern they are not fine which you would expect if original.  The platform is a complete replacement and is nothing like what the original would have been.

Thanks for the input and it made it fun and games so everyone who took part you each win a peanut.:D

  • Like 1
Link to comment
Share on other sites

  • 2 months later...

That's not rubbish. Its a 30 hour Longcase clock dated about 1790 no later then 1800. There's a lot of work involved in putting it in good working order. Pity it doesn't have its original case. Its what as known as a cottage longcase. The painting of a cottage on the dial has nothing to do with the clock name. Very basic sometimes crude movements would be called such a name. More then likely the case would be made of oak and very plain.

  • Like 1
Link to comment
Share on other sites

i just bought a "Shatz type"   ships clock.    its smaller and made of much heaver brass. it sounds like the same mvt..  the only writing is "made in germany"  and an insignia of what looks like wings (both on the dial).  i will be opening it for service and see any other writing.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I would use some binding wire around the part before heating it. It protects the steel from being burned. I know that sounds strange, as you're going to heat it with a blowtorch, but if a part is thin and delicate the steel can literally burn away before your eyes, which isn't funny if you've put hours into the job. I bought some tools steel from Cousins a few years ago which turned out not to be tool steel, because it couldn't be hardened or tempered. I wasn't impressed, as I had spent two hours making the part for it to be useless.
    • Hi that’s what was meant by animal glue “ a glue made from animal products”. Ie bone , skin and other animal residues.  There was a place at Huntington YORK who used to boil down the ingredients. It stunk.   We used it in pellet form in a sort of Bain Marie on a gas ring  it was very good, didn’t think it was around any more with the modern glues, 
    • It's back to the drawing board I'm afraid. As pointed out, the Rodico trick is so fiddly and my pin vice jaws don't close in union. I tried but the screw is so small it's hard to grip the screw in the Rodico without it moving all over the place while trying to get it in the vice. I started to shake too much so gave up before the screw flew off somewhere never to be found again.  I'm now thinking that maybe I could bond the screw on the end of a bit of peg wood and then dissolve the adhesive afterward.  I just had another thought🤔 I have some really small PCB drill bits maybe I could drill a small hole in peg wood and push the screw in, as stated I only need to get the screw started.  Another idea 🤣 Magnetize the screwdriver to hold the screw 🤔 
    • Yeah there is a spring under there. Hopefully now I can source a screw for the click and the bridges! Thanks for your help!
    • Definitely worthwhile, if you are working with old watches - just be sure it's an actual Geiger counter, not one of the vast range of scam/fake "Radiation detectors" on ebay & amazon etc. that detect RF or static electricity...   In the mean time, I'd put the dial and hands in zip bags & wipe down the work area with a damp cloth to pick up any dust, then discard the cloth. The emitted radiation from radium lume is not normally harmful - but inhaling or ingesting a single particle of the material can cause serious long term harm, so do take care with it.  
×
×
  • Create New...