Jump to content

Which Watch Have You Got Coming In The Mail ? Show Us !!!


SCOTTY

Recommended Posts

s-l1600.jpg
 
Winning bid:  £2.78 - Dundee's finest, in need of a good wash. If I can't save that dial, at least the crown and hands will be useful. Bragging rights go to whoever guesses the year (but you will need to wait till I get back and it makes it on to the work bench).
Edited by AndyHull
Link to comment
Share on other sites

Unknown.thumb.png.ba8031e5902b285ca26f85792382f657.png

Finest Minsk quirky Quartz.

LuchLogo1.png.b783d75382302224898fe451af43f10d.png

A Luch of uncertain vintage. It may be sufficiently recent to have a 1656M (Miyota) in it.. but for 0.99p for the job lot, I'm not too worried, so long as it doesn't have an exploded el-cheapo battery etched into the works. There is a bonus pile of other junk with it, none of them particularly interesting,  but it was the dial on this thing that caught my eye.

Seven watches for less than a quid, including this one, what's not to like?

 

Link to comment
Share on other sites

Picked up this Delbana 17 jewel Incabloc recently for next to nothing. 

rdksVty.jpg

 

That's not a good sign...

w5RmlhC.jpg

 

Well, there's your problem...

RcL43HT.jpg

 

A donor mainspring and a good bath and now it's keeping good time and awaiting a new crystal and bands. I may have to do some research here on restoring hands as the luminous paint is long gone from these and the second hand was originally bright red.

CQCxygf.jpg

  • Like 1
Link to comment
Share on other sites

AS 1187/94. Main spring breakage is pretty common.They usually respond well to cleaning and run well if not excessively worn.Most like your watch have in no way been pampered.I think a lot of them were sold to young military men,and naval forces as well because judging from the wavy timegrapher traces on a couple mine , they were obviously calibrated to run at sea. I can't resist them either !

  • Like 1
Link to comment
Share on other sites

On 1/4/2020 at 10:54 AM, FLwatchguy73 said:

That one could qualify as my birth year watch. I wonder if these were sold in scouting catalogs.

Certain department stores had a scouting section back then. I remember My mother taking me to JC PENNEY to get "official" scouting gear.But I am dating myself, that was back in the day when  being trustworthy, loyal, helpful, friendly, courteous, kind, obedient,cheerful, thrifty,brave,clean and reverent were good things. Mom would not buy me the watch , I already had a timex. Don't remember what happened to it.A marlin as I remember.

Edited by yankeedog
Link to comment
Share on other sites

1 hour ago, luiazazrambo said:

What happened to your locomotive watch? Have you got it? I am excited.

Sorry, you will need to contain your excitement for the time being, I'm away on holiday, wont be back for a few weeks.
I'll post pictures as soon as I get it on the bench. :biggrin:

Link to comment
Share on other sites

s-l1600.jpg

I blew the budget for this one, but since postage was free, I only blew it by a few pennies (I allow up to £4 postage normally, anything more than that is taking the mickey, unless it is coming from outside the UK).
A non runner (apparently) for spares or repair. I couldn't resist the blue dial.

 

Link to comment
Share on other sites

Not quite in the same vein, a Citizen alarm clock.
s-l1600.jpg

 

s-l1600.jpg

This one qualifies for the club, as it cost 1/4 of the full entry fee.

There are other examples online with the same model number branded Bulova (which makes sense, since Bulova is a Citizen brand).

H2839-L148540135_original.jpg

This one for example.

 

Edited by AndyHull
Link to comment
Share on other sites

Just for the record, the Sekonda above appears to have a Uglich/Zaria 1956 quartz caliber.

Some interesting tips on this movement here -> https://forums.watchuseek.com/f54/do-you-have-uglich-zaria-1956-calibre-quartz-isnt-working-then-check-tip-2616890.html

There seem to be a few variations of this movement, some with the chip on board like the above Sekonda, and some with a cheaper epoxy blob on board (aka (COB) or (BOB)). I suspect that these are simply cost saving changes, and that the movements are interchangeable.

attachment.php?attachmentid=6122442

p1010410.jpg?w=700&h=

Edited by AndyHull
Link to comment
Share on other sites

AsPurchased3.thumb.jpg.c4de5723e25fb020e0f6bef52e98e8d9.jpg

AsPurchasedRear.thumb.jpg.1584bd5fe129734c73452636b1d29246.jpg

More "not quite a Bulova" fun on its way from the penny lots. The auction claims it is "working", other than the missing crystal, so there is a reasonable chance that the balance is whole. Time will tell.

It looks like there may be an issue with the date wheel, and the dial will need some very careful cleaning too. Lets hope the seller packs it sensibly and doesn't damage the hands.

Edited by AndyHull
Link to comment
Share on other sites

Some days you have no luck at all, today is not one of those days.

AsPurchased.thumb.jpg.092156834951f2e97bedf76b0adb9e79.jpg

A 1976 Timex 2377302576 with a really neat 1970s vibe, and perhaps even some lume... @JerseyMo might be able to shed some light on that (pun intended).

At just a few pennies less than twice the price of the Aviatime, it is well within the 404 club rules.

Now I really do need to find the off button for this eBay mallarky, or my winning streak will see me bankrupt before the week is out. :P

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hi everyone, I put together a Venus 178 recently, but found that the hour counter "creeps" ie. runs when the chrono is disengaged. This is the similar type of setup as the Omega 861, where the hour counter is driven off the mainspring barrel, but stopped when the chrono is disengaged by a friction spring.  Am I correct in assuming that the friction spring for the hour counter driving pinion should be dry? I am guessing that the issue will be either the spring or the driving pinion, but while the driving pinion has some wear the spring looks decent.  I've attached a couple of photos in case anyone has any tips. Thanks in advance!
    • Thanks everyone for the replies. It seems setting the hand is a bit of a guessing game, and I thought there would be a very specific way to do it. Since the reserve indicator hand moves clockwise as the spring is wound, I tried setting it right at the start of the black side. But setting it there doesn't really make sense, because by the time the spring is halfway wound, the hand is only at the end of the red side... In my head halfway wound shouldn't mean the hand is still "in the red."
    • Lovely part of the country! I spend most of my days driving along the A64 for work in and around York. I'll be sure to drop plenty of questions soon! I've actually got a couple of watches on the way that I'm pretty sure I'll need some help with! They look pretty beat up from the pics but I love a challenge and an excuse to buy more tools 🤣
    • I have two of these in my home. You need to remove the movement from the case, take off the hands and remove the dial and take a few good photos of the front plate so I can see what the problem is. The round nut unscrews and the hands pull off pull them off from the center and not the tips as you could break them. 
    • I asked the question of one of the sellers. Its for removing the pins and making the holes in motorbike drive belts. God knows why they were both in two seperate joblots of watchmaking tool, thats bizarre. I haven't posted your setting lever steel yet mike, been busy with my mum past few days and had a locked myself in at home lazy watch repair day today 🙂 but I'm out tomorrow so i will get it off to you then. 
×
×
  • Create New...