Jump to content

Which Watch Have You Got Coming In The Mail ? Show Us !!!


SCOTTY

Recommended Posts

So the first Russian arrived today. I love the dial. No brand name anywhere, but it has a 2209 movement which was used under no less than 5 Russian company banners. Inside the movement is clean and it winds, sets runs great. It needed a slight adjustment to the timing, but it's correct now. I'm going to clean up the Crystal on Monday and see about ordering a proper strap for it.

1575075657727567725903359672002.jpg

  • Like 1
Link to comment
Share on other sites

s-l1600.jpg

Another job lot winging its way from the e of bay. This little lot worked out at £1.14 each +(P&P) each.
There is also a tin of random dials thrown in for good measure.

s-l1600.jpg

Fixing that lot should keep me out of trouble for a few days. :P

Edited by AndyHull
  • Like 2
Link to comment
Share on other sites

just placed an order for a ratty Timex 100, 50's vintage. Hopefully @JerseyMo will have a few parts available for me to purchase to freshen this up. I also acquired one of my personal grail watches, a Sicura Satellite. This one needs some attention and a thorough polish on the crystal. The Satellite has the most unique and massive second hands I've ever seen

timex 50s.jpg

sicura.jpg

  • Like 2
Link to comment
Share on other sites

So, the Swatch Irony Chrono and the Citizen Jet arrived, and as is often the case with eBay purchases, both have issues. The Swatch is essentially dead. Only the hour, minute and sub seconds hands move. None of the chrono functions work! If anyone has ever attempted to repair one of these, I'd be interested to hear your story. The citizen jet's issues are far less troubling. I suspected something was wrong the moment it arrived as I could't find a clear serial number on the case. I opened the case and was pleased to find there was indeed a legit and functioning Citizen 25 jewel Jet movement. But upon even closer examination, the case seemed... off, turns out , It's way off. I looked closely at the dial trying to find identifying numbers there and I noticed the case barely fits the movement. In-fact the inner edge of the case opening covers the outer edge of the dial. Because of this shoehorn effect, someone had to hand fit a domed crystal to keep the hands clear of the crystal. They did an awful hatchet job on the crystal edge getting it to fit. It looks as if the case is actually one of those Indian made citizen "licensed" knock offs, you know the ones with the eagle on the dials that sell for $30 on the Bay! Now I'm on the hunt for a proper Citizen Jet case. Oh well, lessons learned.

Link to comment
Share on other sites

On 12/3/2019 at 2:29 AM, FLwatchguy73 said:

So, the Swatch Irony Chrono and the Citizen Jet arrived, and as is often the case with eBay purchases, both have issues. The Swatch is essentially dead. Only the hour, minute and sub seconds hands move. None of the chrono functions work! If anyone has ever attempted to repair one of these, I'd be interested to hear your story.

...

I did manage to fix one of those, it was front loader, and I needed to pop the bezel off first to get access to its brains.

Cleaned with lighter fluid, it sprang back into life.

Link to comment
Share on other sites

  • 2 weeks later...

I have 5 more watches on the way. Three of them will require major repairs. The first is a Skagen with a mesh band, then a Seiko chronograph 7T32-7C80, a swatch with a see thru body, a Seiko Flightmaster the is pretty banged up and is missing the primary crown. Last is a Seiko diver, 7s26-0020 also in need of serious effort. The photos below are the correct models but not the actual watches, I'll post those later.

skagen.jpg

Seiko-Automatic-7S26-0029-Scuba-Divers-Watch.jpg

flightmaster.jpg

swatch.jpg

chrono.jpeg

  • Like 1
Link to comment
Share on other sites

We have had Beaver watches, we have had blue dialed watches, but what could be better than a watch with a blue beaver... (careful how you answer that, this is a family show).

CanadaPostesBeaver.thumb.jpg.d1152a3de93decd6d64228e33b09db54.jpg

.. another quirky 0.99p number hopefully joining the ranks of the 404 club soon.

As a side note, I did some googling of this particular watch, and found a similar one in as new condition on a Hirsch strap, so it looks like this watch may actually be reasonable quality too.

I'll need to do a little more digging and try to find out why Canada Postes went to all the trouble of producing a commemorative watch with a 5c stamp with a beaver on it. 

CanadaPostesBeaverRear.thumb.jpg.9ac110c099b12addccaf6bdf26ca5b48.jpg

If you want to know a little more about the chap with the flat tail... click the link.

https://postagestampguide.com/stamps/15655/beaver-1954-canada-postage-stamp-national-wildlife

beaver-canada-stamp.jpg

Edited by AndyHull
  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hi I got a Jaeger LeCoultre K911 movement, where one of the stems was broken. Part no. Should be 401.  Im based in Europe and tried Cousins but its discontinued. They except to get stem in stock for cal. K916 but will that work? Or Is there a way out to join the ends?
    • The part was how it fell out of the movement - the train wheel bridge wasn’t screwed in.    I’ll probably dismantle the part, if I can, to work it out.    The train of wheels ran fine - it was only once the keyless works were installed I noticed the problem. 
    • Hello, I am about 5 months into watchmaking and I love it!   The attention to precise detail is what really attracts me to it. (and the tools!) I am working on a 16 jewel 43mm pocket watch movement.   There are no markings besides a serial number (122248) .  The balance staff needs replacement. The roller side pivot broke off.  I successfully removed the hairspring using Bergeon 5430's.  I successfully removed the roller using Bergeon 2810.   Did i mention I love the tools?! I removed the staff from the balance wheel using a vintage K&D staff removal tool  with my Bergeon 15285 (that's the one that comes with a micrometer adjustment so it can be used as a jewel press as well as a traditional staking tool...it's sooooo cool...sorry..  can you tell i love the tools?) No more digressing..  I measured the damaged staff in all the relevant areas but I have to estimate on some because one of the pivots is missing. A = Full length  A= 4.80mm  (that's without the one pivot...if you assume that the missing pivot is the same length as the other pivot (I'm sure it's not)  then A = 5.12 mm...(can I assume 5.00mm here?) F=  Hair spring collet seat  F=  .89mm   (safe to assume .90 here? .. I am sure that my measurement's would at least contain  .01 mm error ?) G = balance wheel seat  G = 1.23 mm  (1.20mm?) H  =  roller staff  H =  .59mm  (.60 mm?) B  = bottom of the wheel to roller pivot   B  = 2.97mm  (3.00 mm?)     here I am estimating  again because this pivot is missing. So my friends, and I thank you profusely,  can you point me in the right direction as to how to proceed? Do i buy individual staffs?  or an assortment?   Since I don't know exactly the name of the manufacturer, will that be a fatal hindrance?   Tbh, I'm not even sure what country of origin this movement is. Thank you!    
    • Thats why i asked that question earlier, what happens if lubrication is placed directly on top of epilame ?  As opposed to walled within its non epilamed area . I'm not saying its right, i have no idea , just asking questions. 
    • thinking of where epilam should be removed did you know there was a patent that covers this? At least for the escapement I'm attaching it. GB1057607A-1 epilame.pdf
×
×
  • Create New...