Jump to content

Most Useless Watch Tool

jdrichard

By jdrichard
in Tools & Equipment

 Share

Recommended Posts

yankeedog Distinguished Member

yankeedog

Posted
Posted (edited)

I disagree with the premise.It has one use.so it is not useless..It would more correctly be called the least useful watch tool.

Edited by yankeedog
Content
  • Like 2
MrRoundel Super WRT Addict

MrRoundel

Posted
Posted

I have a crystal lift like that, made by Vigor. It works, but seems a bit sketchy at how it grabs the edges of soft plastic with sharp metal. I'm sure that it puts scratches around the crystal even if you can't see them without magnification. Plus, it's always a pucker-factor 15 to get the crystal's diameter decreased enough to get it inserted. But since I don't have the proper Longines wrenches for monocoque cases, it's all I can use.

 

  • Like 2
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
I have a crystal lift like that, made by Vigor. It works, but seems a bit sketchy at how it grabs the edges of soft plastic with sharp metal. I'm sure that it puts scratches around the crystal even if you can't see them without magnification. Plus, it's always a pucker-factor 15 to get the crystal's diameter decreased enough to get it inserted. But since I don't have the proper Longines wrenches for monocoque cases, it's all I can use.
 

Just need a proper plastic crystal press.


Sent from my iPhone using Tapatalk Pro
MrRoundel Super WRT Addict

MrRoundel

Posted
Posted
2 hours ago, jdrichard said:


Just need a proper plastic crystal press.


Sent from my iPhone using Tapatalk Pro

You mean a GS type press? I do have one, but for some reason I didn't think it would work on my monocoque Wittnauers, etc. My thinking is that the GS press that I have, you have to put the crystal facing down in the support. The case, generally without a back, has to go over the plunger facing downward in order drop over the crystal. With the one-piece case, the back is not removable, so the plunger cannot pass through a bezel or open back case. Am I wrong, or is this a different type than you are referring to?

vinn3 Distinguished Member

vinn3

Posted
Posted
14 hours ago, jdrichard said:

 

I think it is the crystal lift. Any comments or additions?5dae8ef0a28cd77837e3f882f9232491.jpg

 

 

Sent from my iPhone using Tapatalk Pro

 

   yes;  this is a very good tool.  IF you ever work on vintage watches.

  • Like 1
  • Thanks 1
Tmuir Distinguished Member

Tmuir

Posted
Posted

I use mine regularly, as vinn3 states on vintage watches.

Just used it the other day to fit a 14.4mm crystal onto a late 1950s ladies Certina.

That's the smallest crystal I've fitted and it was nearly at the limit of my tool as I just have the cheap Anchor brand one, but it has worked every time I have used it..

You also need the small base for holding the crystal for the tool to work though, this makes the claw grip the crystal just off the base of it so you can drop the crystal home whilst still compressed and then release the tension and it just expands into place.

  • Thanks 1
Nucejoe Distinguished Member

Nucejoe

Posted
Posted
15 hours ago, jdrichard said:

 

I think it is the crystal lift. Any comments or additions?5dae8ef0a28cd77837e3f882f9232491.jpg

 

 

Sent from my iPhone using Tapatalk Pro

 

Good and useful if genuine bergeon. 

Nucejoe Distinguished Member

Nucejoe

Posted
Posted
1 hour ago, jdrichard said:

Talking about the crystal press with he flat dyes. They are cheap from amazon.bba683824e3f83b031b40ad72e960818.jpg

Sent from my GT-N5110 using Tapatalk
 

Not a quality make. Useful.

  • Like 1
AndyHull Distinguished Member

AndyHull

Posted
Posted

I've just used both the lift tool, and the crystal press, in the process of fixing a Timex. They are a little tricky to get right, and they don't work well in every case, and I did manage to drop the movement on the floor due to my ham-fisted efforts with the lift tool.

I wouldn't say it is  *THE* most useless tool, but perhaps one of the most tricky to use, and not appropriate for some crystals.

Popping the crystal out is often much easier with your thumbs, but obviously you can't do that with a front loader.

  • Like 1
AndyHull Distinguished Member

AndyHull

Posted
Posted

I was going to nominate one of these... 

hammer.jpg&f=1

... but I believe there are a few people who use them to 're-allign' Timex watches.

Sacrilege to my eyes.

Using it to 're-alligning' an overpriced  Daniel Wellington, or maybe a dime store quartz possibly I could forgive, but not a Timex.  :P

  • Like 1
berniethebolt WRT Addict

berniethebolt

Posted
Posted

just used my crystal lift on a friends roamer(question posted earlier!) and it was a doddle both off and on.mine is a Liberty made in india,a good price and quite solid.does the job well.also use a crystal press when needed.both handy to have.B

  • Like 1
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
just used my crystal lift on a friends roamer(question posted earlier!) and it was a doddle both off and on.mine is a Liberty made in india,a good price and quite solid.does the job well.also use a crystal press when needed.both handy to have.B

I find removing the crystal May be ok, however, installing it with those very touchy claws is way too difficult.


Sent from my iPhone using Tapatalk Pro
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
I was going to nominate one of these... 
hammer.jpg%26f=1&key=b24d126953cea2e57cb43cdd67a9e6af46678fe4b0c8ddde7ceb61f3949788fa
... but I believe there are a few people who use them to 're-allign' Timex watches.
Sacrilege to my eyes.
Using it to 're-alligning' an overpriced  Daniel Wellington, or maybe a dime store quartz possibly I could forgive, but not a Timex.  [emoji14]

Is that a Left or Right Handed Hammer?


Sent from my iPhone using Tapatalk Pro
  • Haha 1
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
I've just used both the lift tool, and the crystal press, in the process of fixing a Timex. They are a little tricky to get right, and they don't work well in every case, and I did manage to drop the movement on the floor due to my ham-fisted efforts with the lift tool.
I wouldn't say it is  *THE* most useless tool, but perhaps one of the most tricky to use, and not appropriate for some crystals.
Popping the crystal out is often much easier with your thumbs, but obviously you can't do that with a front loader.

I too use my thumbs to pop out the crystal and a front loader would need the claws??


Sent from my iPhone using Tapatalk Pro
AndyHull Distinguished Member

AndyHull

Posted
Posted
3 minutes ago, jdrichard said:


... and a front loader would need the claws??
 

I grabbed the crystal with the claws, then held the lift tool between my knees and gave the movement plate a playful tap with a plastic rod and the useless tool I mentioned above.

Not the most subtle method, but very reliable for sending the watch in to orbit, and you do need to do that at least once a week, or you 'aint trying hard enough. Second try worked like a charm, and the movement, crystal and movement plate parted with the case quite nicely.

Something makes me suspect there may be a better way of doing this. 

  • Like 1
AndyHull Distinguished Member

AndyHull

Posted
Posted
9 minutes ago, jdrichard said:


Is that a Left or Right Handed Hammer?
 

Check the price. If it is left handed, it will be at least three times the cost of a right handed one. :P

  • Like 1
m1ks WRT Addict

m1ks

Posted
Posted

I nominate the 3D printed mainspring winder that I printed and tried yesterday which successfully butchered a Seiko 7019A mainspring for me. :thumbsu:

At least that spring wasn't in the best fettle to begin with.

Back to winding in by hand unless someone wants to donate a spring winder set?:D

  • Like 2
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
I nominate the 3D printed mainspring winder that I printed and tried yesterday which successfully butchered a Seiko 7019A mainspring for me. :thumbsu:
At least that spring wasn't in the best fettle to begin with.
Back to winding in by hand unless someone wants to donate a spring winder set?[emoji3]

Spring winder sets are easy to find on eBay. Or just do it by hand.


Sent from my iPhone using Tapatalk Pro
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
I nominate the 3D printed mainspring winder that I printed and tried yesterday which successfully butchered a Seiko 7019A mainspring for me. :thumbsu:
At least that spring wasn't in the best fettle to begin with.
Back to winding in by hand unless someone wants to donate a spring winder set?[emoji3]

But you printed a mainspring winder?! Do you have a photo.


Sent from my iPhone using Tapatalk Pro
m1ks WRT Addict

m1ks

Posted
Posted
1 hour ago, jdrichard said:


Spring winder sets are easy to find on eBay. Or just do it by hand.


Sent from my iPhone using Tapatalk Pro

Yes, they're very easy to find, less easy to afford. :thumbsd:

Tmuir Distinguished Member

Tmuir

Posted
Posted

I wonder if I could scale that up to work with my aircraft clocks as the NOS alloy mainsprings I've got I can't wind in by hand and they are too big for all my watch spring winders and too small for my clock spring winders.

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • mbwatch
      Lancashire Watch Co. Pocket watch parts

      By mbwatch · Posted

      To start searching for hands, measure the diameter of the hour wheel where the hour hand attaches, and the tip of the cannon pinion where the minute hand attaches. Use calipers that are accurate to 0.01mm, and then you can look around ebay for hands about the right size. It is typical to have to either close down (concave punch) or broach open the pipe when fitting hands since you won't usually find a set that is the exact diameter of your hour wheel & cannon pinion. It is reasonable to work with something about +/- 0.03mm  Measure the thickness of the 4th wheel extended pivot for a seconds hand. Cousins does sell some new hands for pocket watches, but I don't find them suitable for old watches. They just don't look right so instead I managed to win an auction on an enormous assortment of old hands. It's sort of fun to pick through them and measure to find a workable pair. I use this tool to measure hands:
    • AndyGSi
      Barometer glass required with hole

      By AndyGSi · Posted

      First thought was Ali but not quite the right size. https://www.aliexpress.com/item/4001332181418.html?src=google&pdp_npi=4%40dis!GBP!15.89!15.89!!!!!%40!10000015722336818!ppc!!!&src=google&albch=shopping&acnt=494-037-6276&isdl=y&slnk=&plac=&mtctp=&albbt=Google_7_shopping&aff_platform=google&aff_short_key=UneMJZVf&gclsrc=aw.ds&&albagn=888888&&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en4001332181418&ds_e_product_merchant_id=109329972&ds_e_product_country=GB&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=17859500389&albag=&isSmbAutoCall=false&needSmbHouyi=false&gad_source=1&gad_campaignid=17190468917&gbraid=0AAAAADznYb9wcm3yr5TVnjKS13BUaCYRa&gclid=Cj0KCQjwoZbBBhDCARIsAOqMEZX56VaN03sqlHk3bDswNOyXmi-lHQRBwgyt3mVympigQhcfH6Iqb94aAnEsEALw_wcB
    • dnhb
      Lancashire Watch Co. Pocket watch parts

      By dnhb · Posted

      I'm looking for hands (3) & a crystal (4cm dia.) for my watch Serial No. 85590 as shown in the photo. I'd be grateful for suggestions re potential sources; and to know if uv glue would be suitable for re-fixing the 12mm dia. seconds dial. 
    • mbwatch
      Could anybody work on a screw this small?

      By mbwatch · Posted

      This 1896 book details a lot of the machinery Waltham had developed before 1900 https://archive.org/details/evolutionofautom00mars_0/mode/2up
    • clockboy
      Vostok Amphibia Leaks - own fault

      By clockboy · Posted

      Welcome to the forum, enjoy. The issue is watches that are sold as  waterproof are only valid if serviced and fitted with new gaskets fitted particularly those that are around the stems.A picture of the watch would be helpful for a better analysis..
×
×
  • Create New...