Jump to content

Watch of Today


mk3

Recommended Posts

1 hour ago, ro63rto said:

Nice yacht timer emoji106.png

Thanks ,...I just got this one and I have 2 other non-runners . 1 of them just stopped working correctly . Both non-tunners will run , but not set properly , and you can't buy the circuit boards or get them repaired . 

All three look good and the one in the Watch of Today post still has the plastic protecter on the back .

Link to comment
Share on other sites

Nice Bimroy... where was this in Singapore?

I used to work in Singapore and there used to be all manner of Russian stuff to be had in 'Change Alley' opposite the Clifford Pier. More cameras than watches from what I remember!

Anil.

Link to comment
Share on other sites

Something I'd like to wear but finding links is a bugger, I even called Seiko.:pulling-hair-out: Just wouldn't look right with a strap. Even though 24hour hand is missing, (I got it that way!?!?!?), overall this is in great shape and alarm reminds me of when "the boss" is due home, no matter where in the world I am!:startle:DSCF0303.JPG

Link to comment
Share on other sites

Something I'd like to wear but finding links is a bugger, I even called Seiko.:pulling-hair-out: Just wouldn't look right with a strap. Even though 24hour hand is missing, (I got it that way!?!?!?), overall this is in great shape and alarm reminds me of when "the boss" is due home, no matter where in the world I am!:startle:DSCF0303.JPG

Nice [emoji106]

What model is that?

Link to comment
Share on other sites

15 hours ago, anilv said:

Nice Bimroy... where was this in Singapore?

I used to work in Singapore and there used to be all manner of Russian stuff to be had in 'Change Alley' opposite the Clifford Pier. More cameras than watches from what I remember!

Anil.

Hi,  I picked it up in the bugis area, there's all sorts of shops and business tucked away there.   I might take a wander to change alley today. 

Link to comment
Share on other sites

43 minutes ago, ricardopalamino said:

I've had this Grand Seiko 5641 - 7000 for about a year , but today is the first time I have worn it .  

I gained a renewed appreciation for it after a couple of hours .

 

GS #1.png

GS #2.png

It's a GS high beat, what's not to like, I'm so jealous:thumbsu:

Link to comment
Share on other sites

Wearing a Luch GP dress watch with the 2209 movement.P_20160830_095012.jpg

The 2209 is a bit unusual the below is an excerpt from a famous german movement reference site.

With an intermediate wheel between central minute pinion and a separate minute wheel the complete train is moved to the periphery. And due to the indirect sweep second, there is also no second wheel in the center. Thus neither balance nor barrel is overlapped by any wheel, and the complete height is avalaible for barrel and balance. The result is a rather low profile without reducing sturdiness or accuracy.

 

P_20160830_094921.jpg

 

Looking at the movement picture I just realised that the hairspring seems to be a bit out of round..ie coils not centered. Keeping good time for the last 4 hours though.

One thing about russian watches is that even lower grades have a Breguet overcoil hairspring...but not on this watch however. Despite being targeted to the the higher end of the market, it has a normal (non-overcoil) stud. This is probably because the focus of the designers was to achieve a thin movement and an overcoil would have added more height.

Anil

 

  • Like 1
Link to comment
Share on other sites

8v22-7000, I may end up changing to strap, but because it's kind of unique, it deserves a proper band. Thanks for your approval!

A dark brown croc would pair well with that.

If you are feeling adventurous, have a look at green croc too. would go well with the gold.

I have the same issue with my 7t42. It could do with 1or2 extra links but cannot find any.

20160817_143945.jpg

Link to comment
Share on other sites

15 minutes ago, ricardopalamino said:

Screen shot 2016-08-30 at 5.49.02 AM.pngI use these . They were not available in the 16mm size for a long time . 16mm is what I have used on most of my Seiko deployment clasps . I just ordered 4 ea. 

Good idea, thanks!

p.s. I find the green croc might look pretty special too.

Link to comment
Share on other sites

One thing about russian watches is that even lower grades have a Breguet overcoil hairspring

 

That's just because they bought an American factory in consignment conditions that happened to make watches like that. If they were making e.g. pin pallets movement then the entire Russian population would have been kept awake by their lovely noise for some 60 years [emoji4]

  • Like 2
Link to comment
Share on other sites

George, hats off to you, those movements are a real pain to tackle, but you do it with quite an enthusiasm and your work is first class! Much impressed.

Cheers,

Bob

PS. Beautiful watch, to my taste watches with that movement tend to be quite appealing.

Link to comment
Share on other sites

13 hours ago, bobm12 said:

George, hats off to you, those movements are a real pain to tackle, but you do it with quite an enthusiasm and your work is first class! Much impressed.

Cheers,

Bob

PS. Beautiful watch, to my taste watches with that movement tend to be quite appealing.

Thanks bobm12, I actually enjoy repairing these watches, and the 7T32-7F80 I last posted in particular was kind of a challenge, since it had a broken pin on the plastic baseplate, that prevented the movement to function correctly (among the other issues...). I posted pics on my new blog, if you want to see the status it was in (will not link it since it is also a shop). Since it was a family heirloom of a friend, I had to try and restore it to its formal glory. A picture of how it came to me is attached to this post. He did send a beaten working watch with the same movement, but unfortunately that one also had some issued, so from two watches, I made one. The other will still be repaired, though.

seiko_7T32_Galpin_006.jpg

Edited by GeorgeClarkson
Link to comment
Share on other sites

Nice strap and very appropriate, Ro63rto! I love the watch.

@GeorgeClarkson George, what paint did you use for the bezel? I'm curious since I have a couple watches that can use some of the same treatment. I was thinking about using Testors acrylic model paint...or even the (to me) more convenient Molotow paint "markers"....Thank you in advance.

Cheers,

Bob

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That's the right technique Mal đź‘Ť If you are ok with a loupe ( which I'm not ) then pick up the dial in your left hand and make a tripod holder out of 3 fingers and then exactly how Mal and me described with your right hand, press and flick out the stem at the same time. You need three fingers to do this, i use my ring ring finger , sounds like mal uses his little finger, just whatever you feel comfortable with. The key point and dangerous side to this is the tweezers or driver slipping off the release screw. Stablise your left arm by resting your elbow on your bench, so that you can hold the movement horizontally flat, use a x5 loupe to view  and good light so you can see well and have a good tight fitting screwdriver to push the release down. Or as suggested a pusher mounted solid upside-down somewhere then all you need to do is push your movement up to it. I'll rig something up in a bit to show you what i mean. Something like this, but tbh its better to just learn to do with your fingers.
    • Thanks Michael, shes a real soldier, it would take a tank to knock her off her feet.  Shes surprised even me and i knew she was a tough cookie.  Good for you Michael, you keep at it. I've been reading your posts re. your watchroom they're inspiring and it doesn't matter how long it takes you to get there its about the journey. Rome wasn't built in a day, our watchcaves are our solitudes, our own little empires where we can shut ourselves away from the crap that goes on around us in the world. I look forward to seeing you progress, I have my own ideas how i like to do things. But in answer to your questions on that thread, just let your workspace evolve around you and how you work. You wont figure it out straight away but you will know when to change it and when to leave it alone. But most of all just enjoy it.
    • That can be tricky. Sometimes I hold the movement from the edges in left hand and with right hand I push the release with tweezers and simultaneously pull the stem out with right hand pinky or something. 
    • I see what you mean. I must admit I’m not entirely comfortable with that but I can’t see a better method than what you suggest. I’d like to see something like this mirror with a short spike: https://www.cousinsuk.com/product/mirror-for-observing-movements Place it on, push the spike on the post with one hand and release the stem with the other hand. Minor problem, it doesn’t exist.
    • Hope you mum keeps on mending. I was adamant that I was going to get myself going after my stroke. I was only 52. I still have a lot of life left to live. Some people give up. Some people don't let it beat them. Your mum sounds like one of the winners. 👍
×
×
  • Create New...