Jump to content

Which Watch Have You Got Coming In The Mail ? Show Us !!!


SCOTTY

Recommended Posts

AsPurchasedFace-l1600.thumb.jpg.1872b3edce25bc030f96b896f3608524.jpg

AsPurchased2-l1600.thumb.jpg.4e497046609e24b9740370382eedb04c.jpg

AsPurchasedCaseRear-l1600.thumb.jpg.61df47f83131427fc2c1d67422d22636.jpg

AsPurchased1-l1600.thumb.jpg.6124bda70935c6368fc73f1e27b1d58a.jpg

A slightly scruffy 800 (80%) silver cased cylinder pocket watch is on its way. It looks fairly complete, but absolutely filthy.

I assume it started life with a bezel and glass, so I'll need to try to figure out what to do about that. I should have a suitable bow for it, if not, I can always fabricate one, or pick something up on ebay.

It doesn't quite qualify for the 404 club, but it wasn't far off. With silver at 55 pence per gram or so, if I were a complete barbarian (which I am not), I should easily make my money back from the scrap value of the case.

 

 

If that didn't quite hit the 404 mark, at 0.99p plus shipping this little beauty certainly did.

DialSideCropped.thumb.jpg.8d595d97375bd4f6c801365dadc96237.jpg

Probably by Phenix Watch Co. SA / Dubail, Monnin, Frossard & Co.  (click the link for more info about Phenix), an "Eros" from circa 1930.

I found a very similar watch online, which has an in house Phoenix caliber 116 in it.

Lets hope the balance staff is complete, as I suspect finding one to fit is going to be pretty difficult.

image.thumb.png.8c63b8acf1a6d68aff61b18a2d84b1ce.png

 

AsPurchased4-l1600.jpg

AsPurchased3-l1600.jpg

image.thumb.png.b7ec28f76ee38bb93b28e421d2609317.png

Click the 1940s advert above for even more Phenix info.

AsPurchased2-l1600.jpg

AsPurchased1-l1600.jpg

Edited by AndyHull
  • Like 1
Link to comment
Share on other sites

1 hour ago, AndyHull said:

Lets hope the balance staff is complete, as I suspect finding one to fit is going to be pretty difficult.

Not as difficult as you may think 🙂

Balancestaffs.com lists the Ronda number for the staff as 1974. Cousins has a pack of 12 in stock.

  • Thanks 1
Link to comment
Share on other sites

51 minutes ago, AndyHull said:

Thanks @Marc. Good to know. Lets see if it needs one.

For some reason I couldn't find it on cousins,  but you dont need them Andy. Popped home for lunch and had a quick look for you. When i finish work tonite i will have a measure up and check sizes with balance staff dot com. Looks like only one of R1974 but you are welcome to it, the others are for shock springs, plenty of those. Also quite a few other calibres if it not a 116.

20230307_131908.jpg

20230307_131859.jpg

20230307_131831.jpg

  • Like 1
Link to comment
Share on other sites

Thanks for checking. It probably be a couple of weeks before I get a chance to look at it. I'm only guessing it is a 116, and I'm not sure, even if it is, whether it is, or isn't Incabloc (probably not, judging by the style and probable age). Good to know there is a high chance of finding one though.

Edited by AndyHull
Link to comment
Share on other sites

4 hours ago, AndyHull said:

Thanks for checking. It probably be a couple of weeks before I get a chance to look at it. I'm only guessing it is a 116, and I'm not sure, even if it is, whether it is, or isn't Incabloc (probably not, judging by the style and probable age). Good to know there is a high chance of finding one though.

There is around 25 different calibres of phenix in the stash from 8 1/2 "' up to 19 "' pocket watch. Quite a few at 10 1/2  yours is looking around that size. When you're  ready if you need a staff give me a shout and I'll post you one up to your end. 

16782163945974402354667132499974.jpg

  • Like 1
Link to comment
Share on other sites

AsPurchasedFontCropped-l1600.jpg.a0b097587252fd5c29168698e09d5294.jpg

AsPurchasedRearCropped-l1600.jpg.7caca8e52a80b95994db4be2f9edca76.jpg

I blew the budget on this small ladies wrist watch, or possibly a fob/pocket to wrist watch conversion. These are the only pictures from the listing. I've zoomed and cropped them slightly to make them easier to digest.

It cost a whopping fiver (but the postage was cheap). No I haven't abandoned the 404 club, but I was really curious to find out what is actually in this, and whether it might be silver rather than nickel or steel/gun metal.

I'm not even sure that it is missing its crown and stem, as I initially assumed. There is a very slight chance it might be key wound. Whatever it turns out to be, it has a very clean dial, and a clean pair of hands, which is a bit of a novelty, given the state of one or two other pocket watches I've previously restored.

My current best guess is that it is possibly a cylinder movement, probably nickel, and that the stem and crown are missing. Given the wire lugs, it might even qualify as the mythical "trench watch".


Anybody else want to guess?

 

 

Edit: Strictly speaking there are a couple of things that make this not really likely to be a true trench watch.

First, it has no sub-second hand. If you are co-ordinating actions in the trenches, this is a pretty important thing to have. Secondly, it has no lume, which was also a pretty useful feature. However having said all that, not everybody used a military issue watch in the trenches, so relatively few were the classic  Omega, Longines, Elgin, Rolex or whatever watches in this style,  that command strangely high prices at auction. So in summary, it *could* be a trench watch... but possibly not. You pays your money, you makes your choice.

Edited by AndyHull
Link to comment
Share on other sites

8 minutes ago, AndyHull said:

AsPurchasedFontCropped-l1600.jpg.a0b097587252fd5c29168698e09d5294.jpg

AsPurchasedRearCropped-l1600.jpg.7caca8e52a80b95994db4be2f9edca76.jpg

I blew the budget on this small ladies wrist watch, or possibly a fob/pocket to wrist watch conversion. These are the only pictures from the listing. I've zoomed and cropped them slightly to make them easier to digest.

It cost a whopping fiver (but the postage was cheap). No I haven't abandoned the 404 club, but I was really curious to find out what is actually in this, and whether it might be silver rather than nickel or steel/gun metal.

I'm not even sure that it is missing its crown and stem, as I initially assumed. There is a very slight chance it might be key wound. Whatever it turns out to be, it has a very clean dial, and a clean pair of hands, which is a bit of a novelty, given the state of one or two other pocket watches I've previously restored.

My current best guess is that it is possibly a cylinder movement, probably nickel, and that the stem and crown are missing. Given the wire lugs, it might even qualify as the mythical "trench watch".

Anybody else want to guess?

Yes, my guess ladies pocket watche, cylinder and nickel plated.  Missing the stem. 

  • Like 1
Link to comment
Share on other sites

2 hours ago, AndyHull said:

AsPurchasedFontCropped-l1600.jpg.a0b097587252fd5c29168698e09d5294.jpg

AsPurchasedRearCropped-l1600.jpg.7caca8e52a80b95994db4be2f9edca76.jpg

I blew the budget on this small ladies wrist watch, or possibly a fob/pocket to wrist watch conversion. These are the only pictures from the listing. I've zoomed and cropped them slightly to make them easier to digest.

It cost a whopping fiver (but the postage was cheap). No I haven't abandoned the 404 club, but I was really curious to find out what is actually in this, and whether it might be silver rather than nickel or steel/gun metal.

I'm not even sure that it is missing its crown and stem, as I initially assumed. There is a very slight chance it might be key wound. Whatever it turns out to be, it has a very clean dial, and a clean pair of hands, which is a bit of a novelty, given the state of one or two other pocket watches I've previously restored.

My current best guess is that it is possibly a cylinder movement, probably nickel, and that the stem and crown are missing. Given the wire lugs, it might even qualify as the mythical "trench watch".


Anybody else want to guess?

 

 

Edit: Strictly speaking there are a couple of things that make this not really likely to be a true trench watch.

First, it has no sub-second hand. If you are co-ordinating actions in the trenches, this is a pretty important thing to have. Secondly, it has no lume, which was also a pretty useful feature. However having said all that, not everybody used a military issue watch in the trenches, so relatively few were the classic  Omega, Longines, Elgin, Rolex or whatever watches in this style,  that command strangely high prices at auction. So in summary, it *could* be a trench watch... but possibly not. You pays your money, you makes your choice.

Well I'm going for solid silver. And going out on a limb here I'd say a lever escapement, stem wind and set. All of the cylinder movements that I've seen of this style that were stem wind and set had a button to press to go into set mode. I don't see one on this. Alternatively if it is key wind and set the I'd go cylinder. Nothing like hedging my bets 😉

  • Like 1
Link to comment
Share on other sites

2 hours ago, AndyHull said:

 

 

I blew the budget on this small ladies wrist watch, or possibly a fob/pocket to wrist watch conversion. These are the only pictures from the listing. I've zoomed and cropped them slightly to make them easier to digest.

It cost a whopping fiver (but the postage was cheap). No I haven't abandoned the 404 club, but I was really curious to find out what is actually in this, and whether it might be silver rather than nickel or steel/gun metal.

I'm not even sure that it is missing its crown and stem, as I initially assumed. There is a very slight chance it might be key wound. Whatever it turns out to be, it has a very clean dial, and a clean pair of hands, which is a bit of a novelty, given the state of one or two other pocket watches I've previously restored.

My current best guess is that it is possibly a cylinder movement, probably nickel, and that the stem and crown are missing. Given the wire lugs, it might even qualify as the mythical "trench watch".


Anybody else want to guess?

 

 

Edit: Strictly speaking there are a couple of things that make this not really likely to be a true trench watch.

First, it has no sub-second hand. If you are co-ordinating actions in the trenches, this is a pretty important thing to have. Secondly, it has no lume, which was also a pretty useful feature. However having said all that, not everybody used a military issue watch in the trenches, so relatively few were the classic  Omega, Longines, Elgin, Rolex or whatever watches in this style,  that command strangely high prices at auction. So in summary, it *could* be a trench watch... but possibly not. You pays your money, you makes your choice.

@AndyHullit could very well be a trench watch in the truest sense. The strap bars look crude enough to be the original cobbled together motif from that time. Also you have to consider that Tommy in the trenches only had to know the time of simple things like breakfast, lunch and dinner, everything else was coordinated by the officers in charge of the unit who no doubt had much more accurate and expensive watches.

 

Tom

  • Like 2
Link to comment
Share on other sites

10 hours ago, tomh207 said:

it could very well be a trench watch in the truest sense.

It could indeed. There is an interesting article on trench watches here -> https://www.vintagewatchstraps.com/trenchwatches.php
As you pointed out, not all watches worn in the trenches were on the wrists of officers. I imagine the majority of enlisted men had whatever they brought with them, or could scrounge or purchase when on leave.

  • Like 1
Link to comment
Share on other sites

5 hours ago, AndyHull said:

It could indeed. There is an interesting article on trench watches here -> https://www.vintagewatchstraps.com/trenchwatches.php
As you pointed out, not all watches worn in the trenches were on the wrists of officers. I imagine the majority of enlisted men had whatever they brought with them, or could scrounge or purchase when on leave.

One of the images is very similar to the Rolex?  I posted. 

Screenshot_20230311_100527_eBay.jpg

  • Like 1
Link to comment
Share on other sites

Well, well, I hardly finished one very challenging project or I stumble already over the next. When I looked, it was just put on and for the price I bought it on the spot, without a thorough investigation: it's either going to be a hero or a big zero !! 😲

According to the sellers test, the balance seems to oscillate freely and if it runs, it's only for a short period. I'm looking very much forward to give repair a try ......

Silver case, "LE Phare" Cal 114VCC. Never heard of it but I will start studying tomorrow what I actually just bought 😂

LP-1.thumb.jpg.201c9d59d26faedb84196fdbc259ac2d.jpg

LP-2.thumb.jpg.f1261ec3bd28927edfe17b7800036c50.jpg

LP-3.thumb.jpg.06195c2761c24be967578f3860f739e1.jpg

LP-7.thumb.jpg.3ab3a5dbaed30ed56c8b7d73b7df2c39.jpg

 

 

 

  • Like 3
Link to comment
Share on other sites

5 minutes ago, Endeavor said:

Well, well, I hardly finished one very challenging project or I stumble already over the next. When I looked, it was just put on and for the price I bought it on the spot, without a thorough investigation: it's either going to be a hero or a big zero !! 😲

According to the sellers test, the balance seems to oscillate freely and if it runs, it's only for a short period. I'm looking very much forward to give repair a try ......

Silver case, "LE Phare" Cal 114VCC. Never heard of it but I will start studying tomorrow what I actually just bought 😂

LP-1.thumb.jpg.201c9d59d26faedb84196fdbc259ac2d.jpg

LP-2.thumb.jpg.f1261ec3bd28927edfe17b7800036c50.jpg

LP-3.thumb.jpg.06195c2761c24be967578f3860f739e1.jpg

LP-7.thumb.jpg.3ab3a5dbaed30ed56c8b7d73b7df2c39.jpg

 

 

 

Don't know what you paid but they command a high price. 

1 minute ago, RichardHarris123 said:

Don't know what you paid but they command a high price. 

 

Screenshot_20230313_203746_Chrome.jpg

  • Thanks 1
Link to comment
Share on other sites

On 3/10/2023 at 6:40 PM, Marc said:

Well I'm going for solid silver. And going out on a limb here I'd say a lever escapement, stem wind and set. All of the cylinder movements that I've seen of this style that were stem wind and set had a button to press to go into set mode. I don't see one on this. Alternatively if it is key wind and set the I'd go cylinder. Nothing like hedging my bets 😉

RIMG0612.thumb.JPG.9c3abb07770c7f6b9ce6e39f883c2355.JPG

Good guess. 925 silver, stem wind and set, lever escapement.

RIMG0613.thumb.JPG.c0bab049f39b957ce37ddad8376c1124.JPG

Sadly it seems it needs a balance staff I think, or at least the balance is unseated for some reason and I'll not get a chance to work on it for a while I suspect.

Everything else about the mechanism, at least visually, appears to be intact, although there is some evidence of previous work, including a service mark on the lid.

I'll no doubt find any other gremlins when I strip it down.

It also needs a stem, and removing what is left of the existing one and finding a replacement for the balance staff and the stem may be a little bit of a challenge.

RIMG0618.thumb.JPG.42b3d454bd1de4df174d5960a881e84e.JPG

However it is Sterling (92.5%) silver. As you can see,  quick buff with a polishing cloth has chased all of the tarnish away, so while it currently may no be running, it does look quite attractive.
 

RIMG0615.JPG

Edited by AndyHull
  • Like 4
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • This makes much more sense now, the oil is withdrawing itself to make as little contact with the epilame as possible. Same principle as wax on a car creates a hyrophobic surface that makes the cohesive properties of water molecules pull together.  The water beads run off only when under the influence of gravity but still remain cohesively beaded up. And as mentioned earlier a pivot would keep the oil in place on a cap jewel.  Epilame on an escapement would be a different scenario, there is nothing to hold the oil in position if gravity tugs at the bead to move, plus the escape teeth pull the oil about Maybe this is why its suggested to run the watch for a short while to remove the epilame to make two oleophobic surfaces either side of the oil, creating a ring of fire 🔥 around it 😅
    • As with every skill it watchmaking, it takes practice. Notice at the top of the document it says, "Practical work - 40 hours".  I can get the balance wheels 'close enough' to flat, but never seem to get them perfect. Same with gear wheels. Guess I need more practice.
    • Has it got a beat adjustment on the platform or is it a fixed hairspring? in short what you are looking at to get it just about in beat is to get the roller jewel sitting dead centre between the banking pins. So remove the platform and take of the pallet fork and escape wheel to give you clear line of site, sit the platform with the balance in place and with it level look between the banking pins and see if the roller jewel is sitting between them, if it is nice and central its there or there abouts in beat, if its not the the position of the pinned end of the hairspring needs to be adjusted to move the roller jewel into the correct position, thats why I asked if it has an adjustment on the platform or not, if it has its an easier job. 
    • I've managed to adjust it. I'm going to try and explain it as well as I can with my limited horology knowledge but I hope it helps someone in the future. There is a cam to the right of the front plate as shown in the picture. As the clock ticks along, the pin indicated in the gear comes around and slots into one of the silencer cam gaps, turning the cam. The pin completes a full rotation in 2 hours. To adjust the cam to start at the right time set the clock to just before 7. I did 6:45. Then I turned the silencer cam anticlockwise, which spins freely, until it pushed the silencer lever up and was placed just before the drop. Just before the 7AM indicated in the picture. All I then had to do was progress the hands to 7-7:15which made the pin slot into the silencer cam gap and turn the cam so the lever comes down again, unsilencing the clock. That was it. If anyone comes across this issue again I'd be happy to assist. Thanks again to everyone that helped. Hey Transporter! Thanks a lot for the reply. That was a really good explanation and I'm sure it would have made my troubleshooting a lot less painful haha. I'm sure someone will find it useful in the future. Thank you again for taking the time to try and help me out with this.
    • Now I'm completely confused, it would appear that the epilame  is oleophobic  as @Marc states: This oleophobic  behavior can be seen as beading of the droplet (as above) which stops the oil spreading which is supported by what we observe on treated/untreated cap stones (for example), but as @VWatchie states this should make the drops more mobile and is supported by the literature:   A review on control of droplet motion based on wettability modulation principles design strategies recent progress and applications.pdf   However the hole point is that we have less mobile oil so an oleophobic  would see to be the opposite of what we want. In fact this beading and high mobility are desirable properties in things like smart phone covers, see below.  I am fairly sure that epilame doesn't make the droplets more mobile, so maybe its a strange coating with dual properties that are both oleophobic (beading) and cohesive/adhesive resulting in low mobility?? This may explain the high price??  
×
×
  • Create New...