Jump to content

New job


Recommended Posts

Okay I really need one of you to start a company where I can just call you up and tell you all the watch parts I need and you run around like an idiot and try to find them. Let me know when your new company is up and running please.  I have a long list.

  • Like 2
  • Haha 1
Link to comment
Share on other sites

43 minutes ago, markr said:

Okay I really need one of you to start a company where I can just call you up and tell you all the watch parts I need and you run around like an idiot and try to find them. Let me know when your new company is up and running please.  I have a long list.

isn't that what we call a watch material house?

 

  • Like 1
Link to comment
Share on other sites

54 minutes ago, markr said:

Okay I really need one of you to start a company where I can just call you up and tell you all the watch parts I need and you run around like an idiot and try to find them. Let me know when your new company is up and running please.  I have a long list.

ERM, Like CousinsUK ?

Link to comment
Share on other sites

Supply houses might have a couple of parts you need then you go to another and get one or two things then a search of eBay and a call or two to friends and you still need a couple of things you can't find.  You are spending hours looking up parts numbers.  What I need is a professional parts shopper.  

Link to comment
Share on other sites

nope Bob at ofrei has got that job locked down. he's no idiot by any stretch of the imagination and is a good guy but he does the running all over the place looking for stuff for us customers. but yeah I absolutely get your point. well if you had the scratch and could afford a pro parts person, you'd still have to put in the time waiting for the actual part to get to your hands and into the watch. so ya might as well forgo the parts person and occupy your time looking for parts lol

my worn circular path of travel is between Esslinger, Ofrei, Ebay, a few odd stops at Cousins and AE, then back to the start.

  • Thanks 1
Link to comment
Share on other sites

I use ofrei quite a bit. Other than my latest experience, they have been good, and competitive on price. 
 

I also use StarTime, who seem less popular here but their service is good and website easier to navigate. Slightly more expensive that ofrei, and only “new” stuff. Ofrei is where you find old stock. He has a bunch of JB Champion bracelets in stock at the moment...

  • Thanks 1
Link to comment
Share on other sites

I've been thinking about something like this for a while.  My other hobby is building Lego, anyone seen Bricklink?

https://www.bricklink.com/v2/main.page

Basically, any seller can list all the parts they want to sell, and any buyer can search those parts.  Now think of this for watch parts, especially with a database of compatible parts.

For my real job I write computer games, currently working with backend servers, databases and occasionally web pages so this would be very easy for me to do.  The problem with sites like this is that it's a legal nightmare, there are so many things you have to get in place to protect the sellers/buyers.

 

 

Link to comment
Share on other sites

1 hour ago, AshF said:

Basically, any seller can list all the parts they want to sell, and any buyer can search those parts.  Now think of this for watch parts, especially with a database of compatible parts.

Have a look at this site run by Christian Dannemann "The Watch Guy". I believe that it is available for anyone to use.

  • Like 2
Link to comment
Share on other sites

23 hours ago, markr said:

That's what I need is Bob.  I never tried Ofrei.  I'll have to give them a try. Thanks for the tip.

 

On 11/18/2020 at 10:46 PM, markr said:

That's what I need is Bob.  I never tried Ofrei.  I'll have to give them a try. Thanks for the tip.

long long family lineage in horology history. Ever see their um...warehouse? it reminds me of the end credits of the old Indiana Jones movie of the cavernous government warehouse of secret artifacts... if I ever wanted to get lost someplace, that would be it. it's huge. and over the years they've acquired the inventories of other companies and long established material houses that have long ago vanished. I could spend hours just rummaging thru their stuff just to look at the lost treasures in their inventory. as with everybody, they too, struggle during these weird times but still mange to find hard-to-find stuff. word to the wise-if you do call or email them regarding parts, it's wise to know exactly what you're looking for. otherwise they'll remind ya lol good luck. 

Link to comment
Share on other sites

17 hours ago, Tudor said:

I use ofrei quite a bit. Other than my latest experience, they have been good, and competitive on price. 
 

I also use StarTime, who seem less popular here but their service is good and website easier to navigate. Slightly more expensive that ofrei, and only “new” stuff. Ofrei is where you find old stock. He has a bunch of JB Champion bracelets in stock at the moment...

hmmm. have to check them out. thanks for the tip. yep you're right-I should have mentioned Ofrei kinda specializes in old stock. have a less than pleasant one with Ofrei? I did have one incident, I'll call it-I ordered a bunch of stuff, charged for it only to receive an email 4 days later listing all the stuff they didn't have. turned into a small mess but they fixed it with little suffering on my part. I can think of 100 bigger world problems than that...but yeah, they don't list if it's out-of-stock or not. I suppose with such a huge inventory such as theirs, that is a bit difficult to do. True, their prices are very competitive.  

Link to comment
Share on other sites

2 hours ago, MechanicMike said:

Ever see their um...warehouse? it reminds me of the end credits of the old Indiana Jones movie of the cavernous government warehouse of secret artifacts... if I ever wanted to get lost someplace, that would be it. it's huge. and over the years they've acquired the inventories of other companies and long established material houses that have long ago vanished.

the material house business is an interesting business. My understanding is that when companies like this require other material houses that there placed in a separate location in their warehouse. They do not necessarily attempt to integrate it all into their system for several reasons. The individual cost of components isn't worth taking the time to inventory them. Then did you know there is more than one system? in other words different material houses had different systems makes it impossible to integrate the systems together without spending a heck of a lot of time and effort.
 

2 hours ago, MechanicMike said:

word to the wise-if you do call or email them regarding parts, it's wise to know exactly what you're looking for. otherwise they'll remind ya lol good luck. 

if you could physically walk into a material house in the old days it was a little bit different. A amusing observation was made and pointed out to me. Sure enough once I was paying attention when I would go into the material house to purchase things others did something a little bit different. Rather than having a list with those numbers that would help them out they would bring the physical job. All the various places that were buying parts would send somebody to the material house usually not the watchmaker. Physical watches in the job envelopes placed across the counter sometimes covering the entire calendar. usually notes on each of the jobs of what was needed sometimes they had to call home to see what it was that was needed other times that say things like I'm sure you know what it is when you look at it.

my personal observation was that ideally if you'd like to get what you desire you need to give them as much information as possible. Otherwise they just not going to waste their time looking for your part.

 

 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • This makes much more sense now, the oil is withdrawing itself to make as little contact with the epilame as possible. Same principle as wax on a car creates a hyrophobic surface that makes the cohesive properties of water molecules pull together.  The water beads run off only when under the influence of gravity but still remain cohesively beaded up. And as mentioned earlier a pivot would keep the oil in place on a cap jewel.  Epilame on an escapement would be a different scenario, there is nothing to hold the oil in position if gravity tugs at the bead to move, plus the escape teeth pull the oil about Maybe this is why its suggested to run the watch for a short while to remove the epilame to make two oleophobic surfaces either side of the oil, creating a ring of fire 🔥 around it 😅
    • As with every skill it watchmaking, it takes practice. Notice at the top of the document it says, "Practical work - 40 hours".  I can get the balance wheels 'close enough' to flat, but never seem to get them perfect. Same with gear wheels. Guess I need more practice.
    • Has it got a beat adjustment on the platform or is it a fixed hairspring? in short what you are looking at to get it just about in beat is to get the roller jewel sitting dead centre between the banking pins. So remove the platform and take of the pallet fork and escape wheel to give you clear line of site, sit the platform with the balance in place and with it level look between the banking pins and see if the roller jewel is sitting between them, if it is nice and central its there or there abouts in beat, if its not the the position of the pinned end of the hairspring needs to be adjusted to move the roller jewel into the correct position, thats why I asked if it has an adjustment on the platform or not, if it has its an easier job. 
    • I've managed to adjust it. I'm going to try and explain it as well as I can with my limited horology knowledge but I hope it helps someone in the future. There is a cam to the right of the front plate as shown in the picture. As the clock ticks along, the pin indicated in the gear comes around and slots into one of the silencer cam gaps, turning the cam. The pin completes a full rotation in 2 hours. To adjust the cam to start at the right time set the clock to just before 7. I did 6:45. Then I turned the silencer cam anticlockwise, which spins freely, until it pushed the silencer lever up and was placed just before the drop. Just before the 7AM indicated in the picture. All I then had to do was progress the hands to 7-7:15which made the pin slot into the silencer cam gap and turn the cam so the lever comes down again, unsilencing the clock. That was it. If anyone comes across this issue again I'd be happy to assist. Thanks again to everyone that helped. Hey Transporter! Thanks a lot for the reply. That was a really good explanation and I'm sure it would have made my troubleshooting a lot less painful haha. I'm sure someone will find it useful in the future. Thank you again for taking the time to try and help me out with this.
    • Now I'm completely confused, it would appear that the epilame  is oleophobic  as @Marc states: This oleophobic  behavior can be seen as beading of the droplet (as above) which stops the oil spreading which is supported by what we observe on treated/untreated cap stones (for example), but as @VWatchie states this should make the drops more mobile and is supported by the literature:   A review on control of droplet motion based on wettability modulation principles design strategies recent progress and applications.pdf   However the hole point is that we have less mobile oil so an oleophobic  would see to be the opposite of what we want. In fact this beading and high mobility are desirable properties in things like smart phone covers, see below.  I am fairly sure that epilame doesn't make the droplets more mobile, so maybe its a strange coating with dual properties that are both oleophobic (beading) and cohesive/adhesive resulting in low mobility?? This may explain the high price??  
×
×
  • Create New...