Jump to content

Blacksmith, with a love for watches.

Echotaforge

By Echotaforge
in Introduce Yourself Here

 Share

Recommended Posts

Echotaforge New Member

Echotaforge

Posted
Posted

Hi, I am a new member. My name is James, but I go by Jimmy. I am a blacksmith, with a love of pocket watches, particularly key winds. I do a little tinkering on watches in my collection from time to time. A good friend, and new member, Sterling, knowing of my interest in watches, sent me this link.

The Blacksmith Shop.jpg

oldhippy Distinguished Member

oldhippy

Posted
Posted

Thank you for your introduction and welcome to this friendly forum.

Did you know blacksmiths  used to repair clocks, if no clock maker was about, people would take it to the village blacksmith. 

  • Like 1
Chopin Super WRT Addict

Chopin

Posted
Posted

Welcome Jimmy. Does this mean that you apply your blacksmith experience/equipment on repairing/restoring pocket watches ? Would be interesting to see some of your projects.

Echotaforge New Member

Echotaforge

Posted
  • Author
Posted

Thank you, all for the friendly welcome. To answer the questions brought up; no, I am not a farrier, I interpret the blacksmith trade at the High Point Museum Historical Park, in High Point, North Carolina, USA.

My smithing skills don't help much with tinkering with my watches, rather the other way around. Watchmaking has helped teach me patience.

Oldhippy, I am fascinated by the history of the blacksmith/clock maker, and their involvement in early tower clock building and repair.

  • Like 1
vinn3 Distinguished Member

vinn3

Posted
Posted
10 hours ago, Echotaforge said:

Hi, I am a new member. My name is James, but I go by Jimmy. I am a blacksmith, with a love of pocket watches, particularly key winds. I do a little tinkering on watches in my collection from time to time. A good friend, and new member, Sterling, knowing of my interest in watches, sent me this link.

The Blacksmith Shop.jpg

    welcome James;  i like that image with the anvil,   repairing a Timex ?      vin

  • Haha 2
ITProDad WRT Addict

ITProDad

Posted
Posted
Hi, I am a new member. My name is James, but I go by Jimmy. I am a blacksmith, with a love of pocket watches, particularly key winds. I do a little tinkering on watches in my collection from time to time. A good friend, and new member, Sterling, knowing of my interest in watches, sent me this link.
1856653620_TheBlacksmithShop.jpg.5a0022a776dce59efcdf32e22b3e7fbb.jpg

Welcome, Jimmy. I think you will like this group. I started on pocket watches about 10 years ago. Now, it’s a full blown addiction/hobby! If you have any questions or wisdom to offer, please do. Be sure to post pictures of your project watches.


Sent from my iPad using Tapatalk
ITProDad WRT Addict

ITProDad

Posted
Posted
Hello James my name is Graziano and I am new too, I play around with wrist watches mechanical of course. Gee not many blacksmiths around these days. Good luck champ

Hello Griziano, welcome. It’s a good group. I think you will like us, if you like working on, breaking or restoring watches!! [emoji846]


Sent from my iPad using Tapatalk
ITProDad WRT Addict

ITProDad

Posted
Posted
Welcome Jimmy. Does this mean that you apply your blacksmith experience/equipment on repairing/restoring pocket watches ? Would be interesting to see some of your projects.

That would be interesting to see!! Stick that Patel in the fire for a few minutes and see how it holds up....


Sent from my iPad using Tapatalk
  • Sad 1
ITProDad WRT Addict

ITProDad

Posted
Posted
Thank you, all for the friendly welcome. To answer the questions brought up; no, I am not a farrier, I interpret the blacksmith trade at the High Point Museum Historical Park, in High Point, North Carolina, USA.
My smithing skills don't help much with tinkering with my watches, rather the other way around. Watchmaking has helped teach me patience.
Oldhippy, I am fascinated by the history of the blacksmith/clock maker, and their involvement in early tower clock building and repair.

OH knows everything!


Sent from my iPad using Tapatalk
oldhippy Distinguished Member

oldhippy

Posted
Posted

Here in the UK the Longcase clock or as many people like to call them Grandfather clocks,  with the very old ones you come across the repairs from a blacksmith, Sorry to say they were very crude in closing worn holes due to wear, they would use a punch around the hole to try and take up the wear. That is the most common find. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Bonefixer
      Bizarre state of the balance! Miyota 8200

      By Bonefixer · Posted

      I'm no expert, but I'd guess this one is for the bin. Looks like it's been tinkered with by someone armed with a hammer and chisel. When the pallet, escape wheel and balance are all damaged it's beyond repair isn't it? Or a new movement if the watch itself is of value. 
    • Nucejoe
      Bizarre state of the balance! Miyota 8200

      By Nucejoe · Posted

      No need for special tools. Loosen stud screw and just push hairpsring stud out of the hole.  Regulator arm is spring circled around the setting housing, insert cutting edge of a safety blade under it,  opposit ( 180 degrees) to regu arm itself, and pry  half of the circle up, you then see how it all is made at put together. Remove the mobile stud carrier as well,  reinstal in proper order, first goes on the stud carrier, second put the regulator arm on top and press it home. Exactly as nev explained above. Trueing inner coils is done when balance complete is seperated from the cock.   The part thats bent over itself. 1-Unbend hairspring as much as you can when balance is seperated, just grab the hairspring stud in tweezers , grab hairpsring with another tweezers streighten with  strokes as you  move the second tweezers  away from the stud. 2-Move stud carrier and regulator arm as wide/ apart as they go , to provide max space which comes useful in next step. 3- Fit hairspring stud, into stud carrier hole. 4- Put balance and cock ( when attached together) back on mainplate.  5- You have enough space to grab hairspring in  tweezers to shape as you move your tweezers  away from stud.         
    • RickTock
      Looking to try servicing an old movement

      By RickTock · Posted

      Probably more than you need to know in these two vids, but sharing because I found them quite interesting. 🙂  
    • SamLiddle
      Bizarre state of the balance! Miyota 8200

      By SamLiddle · Posted

      And then the problem of the stud holder and regulator which are on the wrong sides of each other:   I am baffled as to how this will have happened?  They can't re rotated into place, the regulator pins stop the spring stud from moving past. I don't think I can remove the regulator and/or spring stud without a staking set? 
    • nevenbekriev
      Help! Mainspring releasing power!

      By nevenbekriev · Posted

      Just to inform that this is not a shock protection, just end stone fixed in place by the spring.
×
×
  • Create New...