Jump to content

Help

Ruairidh

By Ruairidh
in Introduce Yourself Here

 Share

Recommended Posts

Ruairidh Member

Ruairidh

Posted
Posted

I am only 18 and pretty new to the art of watch mechanics and i am currently in the process of repairing a nearly 100 year old JLC. However I am having a awful time trying to remove the movement from the case, tightening the screws makes the movement more loose and vice versa. I was wondering if anyone could lend some assistance on how to part it from the case. Thankyou

  • Like 1
Link to comment
Share on other sites
yankeedog Distinguished Member

yankeedog

Posted
Posted

Uh...I don't  mean  to sound  condescending. But if this is your  first watch. Put it aside for now.I was 18 once, as long ago as it was!get some practice  on a few watches of negligible  value. There is a touch to watch repair. I know  from experience  it took  me a while  to learn  it.I ruined  a few early  on through my own impatience  and heavy hand. You are in the right spot to learn..you have chanced upon a great  bunch..however  if you feel  confident  to proceed. Pictures  would  help.

  • Like 1
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted (edited)

I have found that in many cases when recommending to a total beginner to not attack valuable, sophisticated or difficult pieces only achieves the opposite result. I suppose is a male proudness psychology process.

I would love to see the young man here showing better judgement than the various others that certainly regretted their hubris, as they were never seen here again after they used the forum to declare war to an heirloom, rare, or expensive fine watch. 

Edited by jdm
  • Like 2
Link to comment
Share on other sites
Chopin Super WRT Addict

Chopin

Posted
Posted (edited)
19 minutes ago, Ruairidh said:

Although disappointed I am aware I am talking to far wiser individuals, therefore ill go back to modifying Vostoks for the time being. Thank you all 

As long as you haven't damaged/broken anything you're fine (for now).

The correct way was to: remove the case back > remove the crown and stem > try to screw in the 2/3 screws on the edge of the movement and then simply rotate the movement slightly until the screws fit into those specially made gaps. this way the movement will come out without forcing it. Hope this helps.

I think the watch is from the 40s...

15789106147114486989344468155163.jpg.0f4e303ac1347ad07ee9adf913567df3.thumb.jpg.2d91e1fbe2e22ed1066fe0155212e5ab.jpg

Edited by Chopin
  • Like 1
  • Thanks 1
Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted
1 hour ago, Ruairidh said:

Although disappointed I am aware I am talking to far wiser individuals, therefore ill go back to modifying Vostoks for the time being. Thank you all 

Should not attempt putting bridges back on, since arbours would not neccessarily fall in corresponding hole. If you must, a prudent procedure can be advised.

 

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Waggy
      Movement holder made with 3D printer

      By Waggy · Posted

      hmmmm.... maybe there is a way to skin that cat 🙀 let me think on it... unless anyone else has any ideas? I left the opening in the side of the base and ring quite large to maybe allow you to grip the crown, but appreciate this may not always be possible, especially for small movements where the crown will not extend past the outer wall of the holder. I noticed this also, but after using the holder for a while I noticed that the ring/holder began to wear into shape (rough edges/bumps worn off) and the size became closer to the desired movement OD. Maybe with some trial and error we could add 0.5 mm (??) to the movement OD to allow for this initial bedding-in?
    • Mallard
      Vintage pocket watches from e-bay (winding stems needed)

      By Mallard · Posted

      Hi nickelsilver, thanks for the great explanation and the links! I'll take a good look in the article.  Especially this is great news to hear! Looking through forums and youtube videos I was informed to 'fist find a case and then fit a movement for it'. But seems that's not the case for pocket watches at least?  I guess I should be looking to find some 'male square bench keys' for now. I was thinking of winding the mainspring using a screwdriver directly, but I found a thread that you've replied on, saying that it could damage the spring. 
    • Waggy
      2813

      By Waggy · Posted

      Murks, The rate and amplitude look OK, and the amplitude should improve once the oils you have used get a chance to move bed-in, also I notice that you are using default 52 degrees for the lift angle, if you get the real lift angle (assuming it's not actually 52) this will change your amplitude - maybe higher, maybe lower. I notice that the beat error is a little high, but not crazy high. At the risk of upsetting the purists, if the balance has an adjustment arm I would go ahead and try and get this <0.3 ms, but if it does not have an adjustable arm then I would probably leave well alone. Just my opinion.
    • Murks
      2813

      By Murks · Posted

      Hi everyone on my timegrapher it showing this do a make anymore adjustment someone let me know ?    
    • Waggy
      Epilame / Fixodrop

      By Waggy · Posted

      Maybe I'm over simplifying this and I'm a little late to the discussion, but just by my looking at oil when I use it on a treated cap jewel  the oil stays in one nice bubble, but when I don't it spreads out to the edges of the jewel. I'm not sure (but could well be wrong) but the analogy of a waxed car and rain is accurate in this case, the wax is very hydrophobic and repels the water, however, the process epilame works by is a different physical process based upon cohesion/adhesion (oleophilic) not repulsion (oleophobic)  at least as far as I have read/observed. If one were to use a oleophobic substance equivalent to wax (hydrophobic) then one would need to create a donut shape to fence in the oil, however if one used such a strategy with a epilame which is oleophilic then the oil would sit on the ring of the donut and not in the 'donut hole', exactly where you don't want it. Even if the oil is smeared then the oleophilic epilame should pull it back to the center (see diagram below). Reference For interest the chemical in epilame is 2-(PERFLUOROHEXYL) ETHYL METHACRYLATE, CAS NO: 2144-53-8
×
×
  • Create New...