Jump to content

Learning with the 7S26

Stephan

By Stephan
in Introduce Yourself Here

 Share

Recommended Posts

ecodec WRT Addict

ecodec

Posted
Posted

I have not done a 7S26 for some time now. I see only a few mechanical watches now and then mainly up market ones that the owners will not pay the manufacturers rate to get fixed. Got 2 more elderly Omega`s to sort too. I do see more Quartz watches and they have taken over it seems to me. I had one last week, quite a nice little Rotary . The battery had been butchered out by a boot and shoe repair Co. who pretend to fix watches. I had to manufacture a new battery retaining bracket and re-tap and fit a larger screw. Then clean it. All OK now. Has anyone else had this experience ?  I know we like mechanical watches but if one gets a decent quartz with asservisement movement the timekeeping is phenomenal. I hope I am still welcome after mentioning the Quartz revolution.

Link to comment
Share on other sites
mtc35 New Member

mtc35

Posted
Posted
3 hours ago, Stephan said:

Hi There, 

I live in the UK and I'm learning how to service the Seiko 7s26 thanks to your Youtube Channel. I'm looking for parts so I thought I would join the talk to learn from others. 

Hi There,

I also just joined today and will be servicing a Seiko 7s26, good luck...

Link to comment
Share on other sites
  • 5 weeks later...
jdm Distinguished Member

jdm

Posted
Posted
4 hours ago, Honestsheet said:

I'm waiting on a minute wheel and pinion from ebay. Seller is myretrostyle. Only 98.6 rating so hopefully its a fit

Nothing wrong with asking here before buying parts. Often people would give for free, in fact I have too many of these.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • mthomas828
      Balance staff sourcing?

      By mthomas828 · Posted

      Hello, I am about 5 months into watchmaking and I love it!   The attention to precise detail is what really attracts me to it. (and the tools!) I am working on a 16 jewel 43mm pocket watch movement.   There are no markings besides a serial number (122248) .  The balance staff needs replacement. The roller side pivot broke off.  I successfully removed the hairspring using Bergeon 5430's.  I successfully removed the roller using Bergeon 2810.   Did i mention I love the tools?! I removed the staff from the balance wheel using a vintage K&D staff removal tool  with my Bergeon 15285 (that's the one that comes with a micrometer adjustment so it can be used as a jewel press as well as a traditional staking tool...it's sooooo cool...sorry..  can you tell i love the tools?) No more digressing..  I measured the damaged staff in all the relevant areas but I have to estimate on some because one of the pivots is missing. A = Full length  A= 4.80mm  (that's without the one pivot...if you assume that the missing pivot is the same length as the other pivot (I'm sure it's not)  then A = 5.12 mm...(can I assume 5.00mm here?) F=  Hair spring collet seat  F=  .89mm   (safe to assume .90 here? .. I am sure that my measurement's would at least contain  .01 mm error ?) G = balance wheel seat  G = 1.23 mm  (1.20mm?) H  =  roller staff  H =  .59mm  (.60 mm?) B  = bottom of the wheel to roller pivot   B  = 2.97mm  (3.00 mm?)     here I am estimating  again because this pivot is missing. So my friends, and I thank you profusely,  can you point me in the right direction as to how to proceed? Do i buy individual staffs?  or an assortment?   Since I don't know exactly the name of the manufacturer, will that be a fatal hindrance?   Tbh, I'm not even sure what country of origin this movement is. Thank you!    
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      Thats why i asked that question earlier, what happens if lubrication is placed directly on top of epilame ?  As opposed to walled within its non epilamed area . I'm not saying its right, i have no idea , just asking questions. 
    • JohnR725
      Epilame / Fixodrop

      By JohnR725 · Posted

      thinking of where epilam should be removed did you know there was a patent that covers this? At least for the escapement I'm attaching it. GB1057607A-1 epilame.pdf
    • LittleWatchShop
      Movement holder made with 3D printer

      By LittleWatchShop · Posted

      Back home...printing now.  Will report results
    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      Oh well, if Master @nickelsilver says it's the way to go, then it is the way to go! I stand corrected! 🫡 Are there any other places where you're supposed to remove the epilame from the contact point of rubbing? I don't think so! Thanks for the effort @Neverenoughwatches, much appreciated! 🙂👍
×
×
  • Create New...