Jump to content

My pocket watches

jdrichard

By jdrichard
in Your Watch Collection

 Share

Recommended Posts

bsoderling WRT Addict

bsoderling

Posted
Posted

Super nice collection and work behind!

I have bought a few PW's myself in the lower price range and usually find them being cylinder movements with broken balance pivots, which kind of halts my further advance since I find very little options for replacement parts.

I do have the staking set and have managed to swap out balance staff a few times on regular wrist watches, so if could just get the parts I would jump on it, even though I realize the cylinder movement has it's own issues to work around. 

Any hints or experiences in this direction would be appreciated.

/Bsoderling

 

  • Like 1
Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
Nice collection, do you mainly focus on pocket watches then?

Yes, seems so. Love working on repairing the old ones. Cleaning watches is far to boring for me. Need to fix stuff, Engineer by degree and profession. Electrical Not mechanical


Sent from my iPhone using Tapatalk Pro
  • Like 1
Link to comment
Share on other sites
azkid Watch Enthusiast

azkid

Posted
Posted


I wonder how many other EE / computer engr types (like me) are on here?

I have bought a few PW's myself in the lower price range and usually find them being cylinder movements with broken balance pivots, which kind of halts my further advance since I find very little options for replacement parts.
...
Any hints or experiences in this direction would be appreciated.
/Bsoderling


I started with Elgin pocket watches of a particular size. What is nice is that they are common as dirt and there are still loads of NOS parts for common sizes on ebay. Elgin shared parts across many grades. That may be true for other big brands too.

I suggest starting with a few non-running movements and getting practice disassembling and reassembling without destroying the super delicate parts. The move on to servicing running watches. I spent too much time trying to fix broken movements way beyond my skills and tools.

Sent from my Pixel 2 XL using Tapatalk

Link to comment
Share on other sites
MrRoundel Super WRT Addict

MrRoundel

Posted
Posted

Nice PW collection. I too have quite a few. I find it hard to believe that I have only one Hamilton, a 992B. I have mostly Waltham, some early and later Howards, Elgins, etc. I got into servicing pocket watches many years before I started to take on wrist watches. If you can learn to turn a staff well on a lathe, you'll do very well fixing many broken pocket watches that are hard to source staffs for. Keep up the good work. Cheers.

 

 

 

Link to comment
Share on other sites
  • 8 months later...
Nucejoe Distinguished Member

Nucejoe

Posted
Posted
On 2/3/2018 at 11:53 AM, Chopin said:

Very nice. Anything particularly fancy or interesting ?

I've never owned one but I do want to get my hands on one and service it myself... It's hard to find one in good condition sadly... Or they're simply too expensive.

Would a pocket malnija cater your taste? Comes with all spare parts you will need.

Regards joe

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Mercurial
      AS2063 - hand setting

      By Mercurial · Posted

      Have you got the pallet fork installed in the movement when you see the train move when using the setting works? As nevenbekriev said, without the pallet fork to lock the train, the behaviour you are describing is normal. If this is happening with the pallet fork installed, you have a problem in the gear train, it should be immobile when the pallet fork is locking the escape wheel.  The fit of the circlip above the pinions on that wheel is crooked in your pictures, it should sit flat up against the upper pinion as in Marc’s picture.  Hope that helps, Mark
    • Khan
      Stem broken - can it be rescued?

      By Khan · Posted

      Hi I got a Jaeger LeCoultre K911 movement, where one of the stems was broken. Part no. Should be 401.  Im based in Europe and tried Cousins but its discontinued. They except to get stem in stock for cal. K916 but will that work? Or Is there a way out to join the ends?
    • Bonefixer
      AS2063 - hand setting

      By Bonefixer · Posted

      The part was how it fell out of the movement - the train wheel bridge wasn’t screwed in.    I’ll probably dismantle the part, if I can, to work it out.    The train of wheels ran fine - it was only once the keyless works were installed I noticed the problem. 
    • mthomas828
      Balance staff sourcing?

      By mthomas828 · Posted

      Hello, I am about 5 months into watchmaking and I love it!   The attention to precise detail is what really attracts me to it. (and the tools!) I am working on a 16 jewel 43mm pocket watch movement.   There are no markings besides a serial number (122248) .  The balance staff needs replacement. The roller side pivot broke off.  I successfully removed the hairspring using Bergeon 5430's.  I successfully removed the roller using Bergeon 2810.   Did i mention I love the tools?! I removed the staff from the balance wheel using a vintage K&D staff removal tool  with my Bergeon 15285 (that's the one that comes with a micrometer adjustment so it can be used as a jewel press as well as a traditional staking tool...it's sooooo cool...sorry..  can you tell i love the tools?) No more digressing..  I measured the damaged staff in all the relevant areas but I have to estimate on some because one of the pivots is missing. A = Full length  A= 4.80mm  (that's without the one pivot...if you assume that the missing pivot is the same length as the other pivot (I'm sure it's not)  then A = 5.12 mm...(can I assume 5.00mm here?) F=  Hair spring collet seat  F=  .89mm   (safe to assume .90 here? .. I am sure that my measurement's would at least contain  .01 mm error ?) G = balance wheel seat  G = 1.23 mm  (1.20mm?) H  =  roller staff  H =  .59mm  (.60 mm?) B  = bottom of the wheel to roller pivot   B  = 2.97mm  (3.00 mm?)     here I am estimating  again because this pivot is missing. So my friends, and I thank you profusely,  can you point me in the right direction as to how to proceed? Do i buy individual staffs?  or an assortment?   Since I don't know exactly the name of the manufacturer, will that be a fatal hindrance?   Tbh, I'm not even sure what country of origin this movement is. Thank you!    
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      Thats why i asked that question earlier, what happens if lubrication is placed directly on top of epilame ?  As opposed to walled within its non epilamed area . I'm not saying its right, i have no idea , just asking questions. 
×
×
  • Create New...