Jump to content

Watchmakers balance tool

Douglas1701

By Douglas1701
in Tools & Equipment

 Share

Recommended Posts

Douglas1701 Watch Enthusiast

Douglas1701

Posted
  • Author
Posted (edited)

I got the tips made and slightly curved at the tip...just guessed at the sizes from pics on the net....they wound up being 1.8 mm, 1.24 mm, 1.14 mm and .45 mm.......pretty close for guessing...lol.....I used various sizes of needles. Heated the tip and flatend it and put a slight curve. Got them flat but have not filed the points yet.

image.jpeg

Edited by Douglas1701
  • Like 1
Link to comment
Share on other sites
SSTEEL Distinguished Member

SSTEEL

Posted
Posted
2 minutes ago, jdm said:

What's the idea behind letting the hairspring dangling rather than stay in its natural shape on the balance cock upside down?

Because once its no longer moving, whilst on the tack, you can easily inspect the hair spring and roller jewel through a loupe.  Also ideal time to inspect top and lower pivots too for wear.

  • Like 1
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
Just now, SSTEEL said:

Because once its no longer moving, whilst on the tack, you can easily inspect the hair spring and roller jewel through a loupe.  Also ideal time to inspect top and lower pivots too for wear.

How you can inspect the hairsping shape while its hanging down? What prevents you from inspecting roller jewel and lower pivot as it's standing in the cock upside down?

  • Like 1
Link to comment
Share on other sites
SSTEEL Distinguished Member

SSTEEL

Posted
Posted (edited)

I'm sure others will answer you too JDM, the tack allows you to work on the balance having both hands free, I only use mine for visual inspections of a COMPLETE BALANCE BRIDGE, looking at the aforementioned, and to see if there are any irregularities in the hair spring, and its fastenings.

Edited by SSTEEL
  • Like 1
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted

Ok, for clarity, do you do these inspections with the balance hanging?

Sorry I just fail to understand how one can see that something is wrong with an hairsping totally out of its normal shape.

BTW both hands should be free with the balance cock standing upside down on the mat. And the the hairsping retails its shape all the time.

  • Like 1
Link to comment
Share on other sites
SSTEEL Distinguished Member

SSTEEL

Posted
Posted (edited)

There can be issues showed with an hair spring hanging that can be missed whilst in situ.  Google watchmakers balance e tack, and you will see the many advantages of such a tool.

I also demagnetise a complete balance whilst on a tack, the base is alloy, non-magnetic for a reason ;)

Edited by SSTEEL
  • Like 1
Link to comment
Share on other sites
szbalogh Super WRT Addict

szbalogh

Posted
Posted

Nice looking balance holder! Mine is just a quick DIY one. A small piece of aluminium with a hole with a toothpick in it :) You can see it on my latest video.

This balance tack is used to correct beat error for watches without beat error regulator. Check Mark's video how to do it! I think that the pivots are also safer and stay clean this this way.

One can however ask if the hairspring get distorted while hanging on the tool? Well, the most sensible part of the HS is at the stud, where it can easily bent if the compass is not moved to the fastest setting, or the HS is out of the compass. I have a watch with a big balance and relatively thin hairspring. It has experienced noticeable distortion after having a journey on my balance tack. I think one should check if the HS is flat and is half way freely between the regulator pins at resting after mounted back in the movement. 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • HorologyHead
      An intro…

      By HorologyHead · Posted

      RichardHarris123: Hello and welcome from Leeds, England.  I have family all over Australia, went as £10 poms Thanks Richard. Hope you’re able to visit your family here and that they’ve all done well 🙂 My relatives arrived from England in the 1790s transported on the ‘Second & Third Fleets’—a story of timber sailing ships, of convicts and doing well in this huge Country of Australia. When I visited the UK in the 1980s, I was too young to comprehend the depth and breadth of its history…  Best wishes, Mike William Chapman, my 4th great Grandad’s charges, at age 23 read at the Old Bailey; sentenced to 7 years of transportation to Sydney.
    • Endeavor
      New balance staff not riveting to balance

      By Endeavor · Posted

      The whole process and the progress are closely observed, it's hand-driven and very controlled. I can't see the "danger", unless you are watching the TV while doing it. As you could have read, and in this quote "wheel" is the balance-wheel.
    • Mercurial
      AS2063 - hand setting

      By Mercurial · Posted

      Have you got the pallet fork installed in the movement when you see the train move when using the setting works? As nevenbekriev said, without the pallet fork to lock the train, the behaviour you are describing is normal. If this is happening with the pallet fork installed, you have a problem in the gear train, it should be immobile when the pallet fork is locking the escape wheel.  The fit of the circlip above the pinions on that wheel is crooked in your pictures, it should sit flat up against the upper pinion as in Marc’s picture.  Hope that helps, Mark
    • Khan
      Stem broken - can it be rescued?

      By Khan · Posted

      Hi I got a Jaeger LeCoultre K911 movement, where one of the stems was broken. Part no. Should be 401.  Im based in Europe and tried Cousins but its discontinued. They except to get stem in stock for cal. K916 but will that work? Or Is there a way out to join the ends?
    • Bonefixer
      AS2063 - hand setting

      By Bonefixer · Posted

      The part was how it fell out of the movement - the train wheel bridge wasn’t screwed in.    I’ll probably dismantle the part, if I can, to work it out.    The train of wheels ran fine - it was only once the keyless works were installed I noticed the problem. 
×
×
  • Create New...