Jump to content

Fellow Wrt! What Are You Repairing Currently?

number98
 Share

Recommended Posts

  • Replies 99
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Blacklab
Blacklab

Work in progress - Smiths Streamline, Smiths Deluxe A558, Smiths Astral National 15 and a Seiko Sportsmatic 828960.   Just completed a Smiths Deluxe A352:   Before-   After-

SSTEEL
SSTEEL

Whilst you mention Quartz, here's a few photos of one of my quartz watch restorations.  Luckily I have a great contact at Citizen SC in Germany, so managed to get some rare parts from them to complete

MrBeat
MrBeat

Well here she is, back from the dead ( land of rust ). Always nice to have a watch return to form, especially one so damaged.         Im a total addict and this is my fix :)

Posted Images

number98 WRT Addict

number98

Posted
  • Author
Posted

A new post is not an option as there is not enough 'meat' in the mainplate.

Anil

Selamat pagi, you may want to try to find a shop that specialize in laser welding and ask them whether do could laser weld. After that maybe sand the extra metal to make it equal. Then from there, maybe think of making of new post. Tapi I think maybe it's best to source a donor watch/movement since it requires a lot of time.

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted

I worked on one of these or one very similar last year & the issue for me was alignment of all of the wheels to get everything in sequence. I seem to remember stripping half a dozen times to get it correct. The one I worked on chimed on the 1/4,1/2 & hours.

Very nice when it was finally running. 

Link to comment
Share on other sites
Blacklab Distinguished Member

Blacklab

Posted
Posted
Work in progress - Smiths Streamline, Smiths Deluxe A558, Smiths Astral National 15 and a Seiko Sportsmatic 828960.

 

Just completed a Smiths Deluxe A352:

 

Before-

attachicon.gifwrt1.jpg

 

After-

attachicon.gifwrt2.jpg[/quote

How did you clean the dial?

See my posts here: http://www.watchrepa...-dial-cleaning/ the second post is the dial from the watch above.

Link to comment
Share on other sites
swordfish Watch Enthusiast

swordfish

Posted
Posted

Gentlemen, can one of you please send me a private message to instruct me on how to start a new thread in this forum? I'm using iPad mini, and I've been using Internet and forums for >30 years, but I can't figure this out! I want to discuss the perplexing problem of a battery operated Seiko Perpetual calendar which gains about 30 minutes a day.

Sent from my iPad using Tapatalk

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

Gentlemen, can one of you please send me a private message to instruct me on how to start a new thread in this forum? I'm using iPad mini, and I've been using Internet and forums for >30 years, but I can't figure this out! I want to discuss the perplexing problem of a battery operated Seiko Perpetual calendar which gains about 30 minutes a day.

Sent from my iPad using Tapatalk

Go to the home page.

Click on "Watch repairs help and advice"

Click on "Start new topic" at the top right hand side. It is a black coloured tick box.

Link to comment
Share on other sites
swordfish Watch Enthusiast

swordfish

Posted
Posted

Geo, thanks for your efforts. I couldn't do it from a Windows 8 PC either. It's almost 4 AM here. I'll give up for now and hope someone will have diagnosed my problem by my next visit tomorrow.

Sent from my iPad using Tapatalk

Link to comment
Share on other sites
swordfish Watch Enthusiast

swordfish

Posted
Posted

This may be a useful clue: I seem to have two names associated with the same email address: swordfish and echevlen. Tomorrow I plan to uninstall the software, and if necessary create a new account to see if that solves the problem.

Sent from my iPad using Tapatalk

Link to comment
Share on other sites
CKelly WRT Addict

CKelly

Posted
Posted (edited)

Hi,

   I was at one of our daughters visiting yesterday. She suggested that my son-in-law show me a grandfather clock that he inherited from his grandfather so I could maybe get it running. I wasn't sure what I was expecting but I was not ready for what I found. There was a box of cut wood parts, a Jauch movement and nothing that even looked like a clock. Basically it was a grandfather clock kit that had been stored in a basement for 20 years. I'll post some pictures later.

Edited by CKelly
Link to comment
Share on other sites
anilv Distinguished Member

anilv

Posted
Posted

I remember a box of wooden parts which were supposed to be the legs of a marble-top table.

 

The parts were held together by wooden dowels and I spent half a day getting the parts back together. A big help was the different colours, the table sat for a long time in the kitchen and smoke and dirt covered one side while the other was slightly 'cleaner'. The parts would only fit one way.. if the wrong dowel was used it would either be too tight or too loose.

 

This table probably dated from the turn of the century, impressive what they could do in the past with just hand tools and ingenuity.

 

Anil

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

This table probably dated from the turn of the century, impressive what they could do in the past with just hand tools and ingenuity.

 

There were some pretty good machine tools in 2000! ;)

Seriously though, it sounds like a good project you're working on, you must post a picture when the restoration is complete.

  • Like 1
Link to comment
Share on other sites
CKelly WRT Addict

CKelly

Posted
Posted (edited)

As promised here are some pictures of the clock or clock parts. The picture of the parts in the box is sort of what I first saw. Another shows the base almost finished, then the waist and just today after work did a little bit on the hood. Also got a picture of part of the instruction book, now don't for a minute think any of the parts are marked. By the way the kit was made by Emperor clocks out of Alabama.

post-250-0-53514500-1436827359_thumb.jpg

post-250-0-30097600-1436827376_thumb.jpg

post-250-0-08795500-1436827400_thumb.jpg

post-250-0-72716500-1436827435_thumb.jpg

post-250-0-16078000-1436827469_thumb.jpg

post-250-0-46054000-1436827495_thumb.jpg

Edited by CKelly
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • JohnR725
      Seiko 6601 Tech Sheet?

      By JohnR725 · Posted

      yes I noticed the new site and I miss the old site. It's the unfortunate problem of the Internet here today gone tomorrow sometimes some of the stuff gets backed up and sometimes well it does not then the problem with the early Seiko's were there were not necessarily designed for distribution across the planet and as such there is no customer support for them. So trying to find early stuff like technical information or sometimes even parts list for older Seiko is is problematic. But I did find you a you tube video. A quick look he seems to take a heck of a lot of time to actually get to the service single I did not watch all that but it does look like he did disassemble or started to say there's a tiny bit here  
    • HorologyHead
      An intro…

      By HorologyHead · Posted

      RichardHarris123: Hello and welcome from Leeds, England.  I have family all over Australia, went as £10 poms Thanks Richard. Hope you’re able to visit your family here and that they’ve all done well 🙂 My relatives arrived from England in the 1790s transported on the ‘Second & Third Fleets’—a story of timber sailing ships, of convicts and doing well in this huge Country of Australia. When I visited the UK in the 1980s, I was too young to comprehend the depth and breadth of its history…  Best wishes, Mike William Chapman, my 4th great Grandad’s charges, at age 23 read at the Old Bailey; sentenced to 7 years of transportation to Sydney.
    • Endeavor
      New balance staff not riveting to balance

      By Endeavor · Posted

      The whole process and the progress are closely observed, it's hand-driven and very controlled. I can't see the "danger", unless you are watching the TV while doing it. As you could have read, and in this quote "wheel" is the balance-wheel.
    • Mercurial
      AS2063 - hand setting

      By Mercurial · Posted

      Have you got the pallet fork installed in the movement when you see the train move when using the setting works? As nevenbekriev said, without the pallet fork to lock the train, the behaviour you are describing is normal. If this is happening with the pallet fork installed, you have a problem in the gear train, it should be immobile when the pallet fork is locking the escape wheel.  The fit of the circlip above the pinions on that wheel is crooked in your pictures, it should sit flat up against the upper pinion as in Marc’s picture.  Hope that helps, Mark
    • Khan
      Stem broken - can it be rescued?

      By Khan · Posted

      Hi I got a Jaeger LeCoultre K911 movement, where one of the stems was broken. Part no. Should be 401.  Im based in Europe and tried Cousins but its discontinued. They except to get stem in stock for cal. K916 but will that work? Or Is there a way out to join the ends?
×
×
  • Create New...