Jump to content

Casual Interest turning into Exciting Hobby

BungleBogs

By BungleBogs
in Introduce Yourself Here

 Share

Recommended Posts

BungleBogs New Member

BungleBogs

Posted
Posted

Hi All,

I'm Matt from the UK, a father of four, and have always spent a lot of down time (toilet and waiting in queues) watching various horological videos on YouTube. Some of my favourites are ClickSpring, Master Watchmaker, Nekkid Watchmaker, Reuben Schoots, and RWSmithWatches. Scattered amongst all of these are a lot of hand & machine tool restoration and machining. It is clear where my passions lay.

I'm an electrician but haven't worked in that field for more than a decade. I'm now tied to a desk as a programmer (which I love), but I miss working with my hands. The children are growing up rapidly and are now becoming quite independent, one in particular is close to flying the nest. This means I'm now have a bit more free time and why my fingers were getting itchy!

My exact path on this hobby is not yet clear, but I do have it in my mind that one day I'd like to construct my own timepiece from stock. That would be many years off, so as it currently stands I'm purchasing old movements and practising taking them apart and putting them back together. In addition, I'm making my own simple tools. My next project is several pairs of hand levers in silver steel and brass.

It is great to find this forum and community.

Cheers,

Matt.

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted

Welcome Matt enjoy the forum. Horology is one of those hobbies / skills that has a never ending learning curve and it can become very addictive.  However there are rewards when yo get a vintage non running watch back up and running. Enjoy the  forum.

  • Like 1
Link to comment
Share on other sites
BungleBogs New Member

BungleBogs

Posted
  • Author
Posted

Thank you all for the warm welcome. I will be completing my first strip downs and assemblies this weekend. I'll be doing it on a cheap Ebay bought movements. It won't be a service exercise, more an orientation and practice session.

I've repaired a few iPhones for my kids in the past. Battery, screen, and camera replacement mostly and what is interesting is how similar the core tools are and the working practices. Equally, I've built my fair share of models (one of my kids is into Warcraft 40k), Meccano, and electronic circuit boards.

So whilst this might be my first rodeo, I feel like I have some of the riding skills already in place.

Any advice beyond a clean, organised, working environment and recording each step of the process?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Part swapper to part maker

      By Neverenoughwatches · Posted

      Thanks Rich, its really not that difficult to make them, simple ones anyway. Cousins didn't have the part though i could find it on ebay at 6.50. I figure i earned about £1.50/ hr . It paid for the diamond files i bought.
    • mikepilk
      How to remove shock settings from Smiths 512 movement

      By mikepilk · Posted

      If you look at this thread, you can see I had exactly the same problems with balance springs with 2 prongs on a Smiths 627. The slots in the chaton were not big enough to get the ends of the spring out. I had to bend them to get them out and back in. Not ideal. I don't fancy having to do it again as they could easily break, and where would you find replacements? I didn't come across the 3 prong type.     
    • mikepilk
      Breguet Exhibition at London Science Museum

      By mikepilk · Posted

      I visited the Breguet Exhibition today. https://www.sciencemuseum.org.uk/about-us/press-office/rare-timepieces-unveiled-new-display-science-museum The Science Museum now holds the collection of "The Worshipful Company of Clockmakers" - "The collection includes more than 600 watches, 90 clocks, 30 marine chronometers and a number of fine sundials and examples of hand engraving, mapping the history of innovation in watch and clock making in London from 1600 to the present day." It's well worth a visit. They have some amazing pieces by the likes of Harrison, Breguet, Tompion etc . I've visited twice before but decided to go and see the Breguet Exhibition. Maybe I was expecting too much, as on reflection, "More than 20 extraordinary timepieces designed by inventor and watchmaker Abraham-Louis Breguet " isn't going to take up that much space. In reality, it's just one cabinet. But, Oh those watches, stunning 🤩 , e.g. (No 1297 was made for George III and is valued about £1m)   I tried a couple of pics, but with subdued lighting and taking through glass, they aren't good. I like thin hands on a watch - how about these (I think this is a split second chrono)   And this one, with all it's complications, is only 10mm thick !   What I found very interesting were a few very old machines for making watch parts, like this 17th Century gear cutter. The disc below has concentric rings with holes in, so that is can be set to cut varying teeth numbers.       
    • RobS
      How to remove shock settings from Smiths 512 movement

      By RobS · Posted

      Firstly sorry for poor image quality I only have an iPhone for photos.    Im working on a 512 movement and I’ve had some trouble with the “jewels”. I’ve got the metal one out, but when I tried to put it back the three sides of the spring seem to need pressing all at once to fit it as there are three “holes”. I get two corners in but as I go for the third the first two pop out! Constantly I’ve lost the spring. I’ve done the similar ones on seiko movements without trouble. Assuming I find it/a replacement, what am I missing!   on the other side with the only ruby in the movement is a setting with no “gap”at all. How do I get the spring out, and of course get it back in!    What am I missing!    thanks in advance.    Rob
    • Geotex
      Roland Ranfft RIP

      By Geotex · Posted

      Links like that are the reason I routinely donate to the Internet Archive - they are the last safe house for a tremendous amount of useful info that is otherwise lost.
×
×
  • Create New...