Jump to content

Recommended Posts

Posted (edited)

It never ceases to amaze me what you can stumble across whilst looking up something else on the web.

I was looking for help on replacing the failed hydraulic disc breaks on my 15 year old mountain bike, but instead discovered a gem of a video on how bicycles were made in Britain back in 1945.

Enjoy the video if you have nothing better to do for the next 17 minutes and 22 seconds.

 

Edited by Tmuir
fixed link
  • Like 4
Posted

They built them to a different standard to modern day bicycles. My brother in law still nips down to town on his pre ww2 Raleigh, leaves it out side the bookies unlocked as he's always done. Weighs a ton with rod operated brakes so doubtful if anyone would "borrow" it. Looks a little tired now but rides lovely for its age.

Sent from my moto g(8) power lite using Tapatalk

Posted

I cant afford another BSA motorcycle to restore, but want another project so I'm on the lookout for a BSA bicycle now, preferably 1940s to early 1950s and in particular I want one fitted with a 3 speed hub, but they are not that common where I live.

Posted

With lockdown there's been a mad rush for bicycles over in the UK so you can't find a decent bike at sensibly price at them moment. (Good news if your selling of course [emoji3]). Give it 6 months and things may be different.

Picture of my hack attached, one of the last of the Nottingham built Raleigh's from the mid 90's on our usual post work stress buster.



e10a385247a674cc59759600f0d4ce20.jpg

Sent from my moto g(8) power lite using Tapatalk

  • Like 1
Posted

I have always had fun with bicycles. I Appreciate  the geometry  of the English roadster. I think it is probably  the best  design for a bike ridden  every day. 26×1 3/8 Tires  with thorn resistant tubes  are also a good  choice. They won't  go flat  easily  like the skinny high pressure  things ,and they aren't  a bear the peddle like mad and go nowhere  like the tires on a mountain  bike. For those of us who refuse to wear  spandex. The roadster is just the thing.

Posted

Bicycles are another fixation of mine.  I like to work on them almost as much as I do watches.  I tend to make my tools and skills available to the neighborhood kids who nedd work done on their bikes.  

I also always wanted an early motorbike, like from the 'teens to early twenties. Being tremendously expensive though, I had to find another way.  So I built one.  This here is "Tempus" (because time flies).  It has the frame of a 1948 JC Higgins balloon-tire cruiser, to which I bolted a 50 cc two-stroke engine.  I fabricated the tank, the headlamp (which is actually electric) the clutch lever, and a number of other little parts.  It has a leather saddle and a little leather-covered trunk.  It's not very fast, maybe 30 mph tops, but for in-town it does very well.  And it's almost theft proof, in that nobody has anything vaguely like it for miles around.

IMG_20120612_204005.jpg

  • Like 4
Posted

I love steel bikes too. Here is one of my recent acquisitions. A Concorde Colombo in team PDM colours, just like Sean Kelly used to cycle :)

2.jpg

3.jpg

  • Like 3
Posted (edited)

If bikes of all kinds are your thing, and you find yourself in Glasgow then I highly recommend the Riverside Museum (actually even if bikes are not your thing).

image.thumb.png.23beea11770f8a92cc40fb0e4e27b5e4.png

 

image.png.f3e4214a78fea1598da19740336a6bf3.png

 

Click the links for a little more of a flavour of the place.

https://www.tripadvisor.co.uk/Attraction_Review-g186534-d214166-Reviews-The_Riverside_Museum_of_Transport_and_Travel-Glasgow_Scotland.html#photos;aggregationId=101&albumid=101&filter=7&ff=390872885

You can easily spend a day in the place.

The Riverside is second (in my opinion) only to the National Museum of Scotland in Edinburgh as must see museums round here.

The NMS also has some interesting cycling exhibits.

https://www.nms.ac.uk/explore-our-collections/stories/science-and-technology/bicycles-at-national-museums-scotland/

 

Edited by AndyHull
  • Like 4
Posted
Bicycles are another fixation of mine.  I like to work on them almost as much as I do watches.  I tend to make my tools and skills available to the neighborhood kids who nedd work done on their bikes.  
I also always wanted an early motorbike, like from the 'teens to early twenties. Being tremendously expensive though, I had to find another way.  So I built one.  This here is "Tempus" (because time flies).  It has the frame of a 1948 JC Higgins balloon-tire cruiser, to which I bolted a 50 cc two-stroke engine.  I fabricated the tank, the headlamp (which is actually electric) the clutch lever, and a number of other little parts.  It has a leather saddle and a little leather-covered trunk.  It's not very fast, maybe 30 mph tops, but for in-town it does very well.  And it's almost theft proof, in that nobody has anything vaguely like it for miles around.
IMG_20120612_204005.thumb.jpg.063de8274a31100f9a89f99b42a618e5.jpg
Looks very similar to Peewee Herman's bicycle [emoji106]
Posted

I was lucky and bought mine in February. Not used it much yet. Got it marked for free by the police in conjunction with Bike Register for what good it'll do.
Cheap & Cheerful
Btwin Rockrider ST520
IMG_20200227_151003.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hello and welcome to the WRT forum.
    • interesting video nice to see the machine what it can do now I wonder what it costs and I'm sure it's not in my budget. Plus the video brought up questions but the website below answers the questions? What was bothering me was the size of his machine 4 mm because I thought it was bigger than that? But then it occurred to me that maybe they had variations it looks like four, seven and 10. With the seven and 10 being the best because way more tool positions in way more rotating tools. Although I bet you all the rotating tools are probably separate cost https://www.tornos.com/en/content/swissnano   Then as we been talking about Sherline. Just so that everyone's aware of this they have another division their industrial division where you can buy bits and pieces. I have a link below that shows that just in case you don't want to have the entire machine you just need bits and pieces. https://www.sherline.com/product-category/industrial-products-division/   Let's see what we can do with the concept I explained up above and bits and pieces. For one thing you can make a really tiny gear very tiny like perhaps you're going to make a watch. Then another version the center part is not separate it is all machined from one piece. Then fills gear cutting machines have gone through multiple of evolutions. A lot of it based on what he wanted to make like he was going to make a watch unfortunately eyesight issues have prevented that. Another reason why you should start projects like this much sooner when your eyesight is really good or perhaps start on watches first and then move the clocks then local we have from the industrial division? Looks like two separate motors and heads. Then it's hard to see but this entire thing is built on top of a much larger milling machine as a larger milling machine gave a very solid platform to build everything.   Then like everything else that had multiple generations are versions the indexing went through of course variations like above is one version and the one below was the last version. Now the version below I mentioned that previously and somewhere in the beginning to discussion and somebody else had one in their picture. As it is a really nice precision indexing. Then I wasn't sure if I had a the watch photos here is his unfinished watch. No he wasn't going to make a simple watch like none of his clocks were simply either what would be the challenge and that.    
    • Use a Portwest Howie lab coat. They are the biological type so they have tapped cuffs so you don't end up getting the loose cuffs of normal lab coats catching everything. 
    • Some of the Chinese tools ae great and can be purchased at a fraction of the price of Swiss ones, some are complete garbage and some I'm convinced are coming out the same factory as the branded ones.
    • I found this string about this problem. I've not gone through it all, but I believe it also mentions making a spring. If not in this string, the info is online.
×
×
  • Create New...