Jump to content

Happy to be here!

WatchCodger
 Share

Recommended Posts

WatchCodger New Member

WatchCodger

Posted
Posted

Born in 1968, I was fascinated by my dad's Tissot automatic as i grew up in the 70's -- when everybody else was winding their watch. I begged for and got a watch (hardware store Timex) for my First Communion and have it somewhere around. When I had my first decent, high school, summer job I bough a Seiko Turtle by accident. It was the only automatic, that wasn't a Rolex, that I could find in Metro Boston, MA in the summer of 1985! I paid it off over the course of the summer. Great watch then, great watch now.

Although I have a few Swiss watches (Tissot and Oris), I've found my way here through watch modding. I have done several mods and fully-from-parts builds of Seikos and Vostoks. Along the way I have either damaged or picked up defective movements. Through watching Mark's 7s26 overhaul video, I was able to replace the bad balance assembly in a new NH36 (Invicta OEM), where the spring came lose, with one from a new 7s26 (SNK789 OEM with a problem seconds pinion). I didn't think I'd get into repairs/servicing, but now I'm hooked. (Braking grease - love it!)

Additionally, Mark's videos are just great to watch when I'm on the indoor trainer bike.

I'm excited to learn more, try more, and get better!

Turtle.jpg

Subdued2.jpg

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • HorologyHead
      An intro…

      By HorologyHead · Posted

      RichardHarris123: Hello and welcome from Leeds, England.  I have family all over Australia, went as £10 poms Thanks Richard. Hope you’re able to visit your family here and that they’ve all done well 🙂 My relatives arrived from England in the 1790s transported on the ‘Second & Third Fleets’—a story of timber sailing ships, of convicts and doing well in this huge Country of Australia. When I visited the UK in the 1980s, I was too young to comprehend the depth and breadth of its history…  Best wishes, Mike William Chapman, my 4th great Grandad’s charges, at age 23 read at the Old Bailey; sentenced to 7 years of transportation to Sydney.
    • Endeavor
      New balance staff not riveting to balance

      By Endeavor · Posted

      The whole process and the progress are closely observed, it's hand-driven and very controlled. I can't see the "danger", unless you are watching the TV while doing it. As you could have read, and in this quote "wheel" is the balance-wheel.
    • Mercurial
      AS2063 - hand setting

      By Mercurial · Posted

      Have you got the pallet fork installed in the movement when you see the train move when using the setting works? As nevenbekriev said, without the pallet fork to lock the train, the behaviour you are describing is normal. If this is happening with the pallet fork installed, you have a problem in the gear train, it should be immobile when the pallet fork is locking the escape wheel.  The fit of the circlip above the pinions on that wheel is crooked in your pictures, it should sit flat up against the upper pinion as in Marc’s picture.  Hope that helps, Mark
    • Khan
      Stem broken - can it be rescued?

      By Khan · Posted

      Hi I got a Jaeger LeCoultre K911 movement, where one of the stems was broken. Part no. Should be 401.  Im based in Europe and tried Cousins but its discontinued. They except to get stem in stock for cal. K916 but will that work? Or Is there a way out to join the ends?
    • Bonefixer
      AS2063 - hand setting

      By Bonefixer · Posted

      The part was how it fell out of the movement - the train wheel bridge wasn’t screwed in.    I’ll probably dismantle the part, if I can, to work it out.    The train of wheels ran fine - it was only once the keyless works were installed I noticed the problem. 
×
×
  • Create New...