Jump to content

"Master" watchmaker


Recommended Posts

I've received a 2824-2 watch with the complain that it stops. Just looking at it in jeweler's shop I noticed:

  • date misaligned
  • date changes at the wrong time
  • caseback opening scratches
  • doesn't hack
  • weight hardly turns

Then while disassembly

  • one casing screw missing
  • both dial feet snapped flush and consequent double side tape
  • lots of oil in the oddest places, like under barrel bridge
  • missing stop lever
  • barrel bridge screws lose, likely that's why the ratchet wheel left marks on it and it would not auto wind.
  • driver scratches on the barrel

One could think that was the result of an improvised repairer or owner. Not so, as it happens it was given to this small town shop which proudly has a sign outside: "master watchmaker". After a long time and much money the desperate owner wanted to try someone else to repair it. I hope to be able to.

P2201219.JPG

P2201220.JPG

P2201218.JPG

  • Like 3
  • Confused 1
Link to comment
Share on other sites

  • 2 weeks later...

Some more evidence. May be the idea is that you mark parts that go more or less together?
I have reassembled the mov't and timing is flawless. But i'm afraid the issue with auto winding is still there, I may post about that separately.

 

P3011248.JPG

P3011249.JPG

P3031251.JPG

  • Like 1
Link to comment
Share on other sites

Jeezumpetes.

I just got a Baume & Mercier chrono, was serviced 6 months ago by B&M, 800 bucks. Stopped. Sent in for warranty, they said it was dropped, not covered. Ends up on my bench....

2892 with Dubois Depraz module. Straight away, auto module was barely screwed on. Get to taking the dial off, one dial screw missing. Found it in the chrono module, put it where it belongs, double checked all the other screws, and it runs great.

And the brands don't want to distribute parts because us indie guys are hacks.

Hahahahaha.

  • Like 2
Link to comment
Share on other sites

I always scratch and "X" into every part I touch to remind me that it cleaned it. :rolleyes:

 

31 minutes ago, nickelsilver said:

And the brands don't want to distribute parts because us indie guys are hacks.

Not just watch brands ... auto makers, tech companies, big pharma ... don't get em started.

  • Haha 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • its used to lengthen or shorten the suspension spring from the front f the clock dial, this in turn will give regulation to the clock. Try inserting a pocket watch key or even better the double ended key for the clock into the small aperture on the dial at the top and turning it, you will see the suspension block either raise or lower. If it raises the clock will run faster if it lowers the clock will run slower
    • Grateful for info regarding the nature & function of the horizontal cog and the unit it's on top of in the picture. It meshes with a vertical cog (enclosed in the unit) on the arbour which is supported at its other end by the back plate of the dial unit to which it is not quite perpendicular...
    • does anyone knows what type of battery this digital Watch takes?  
    • Hello good watch folk ,I  just fancied a light hearted discussion after my head was starting to spin over Epilame 😅. Specifically I'm meaning the sale of vintage watches, say nothing past the 1980s market. The stuff we see on ebay and other similar sites and found at carboots, curio shops etc. And are  we thinking its reaching a peak volume ?  Younger generations clearing out passed parents and grandparents possessions.  The younger folk are not as sentimental as the old fogies ( I'm now nearly at an age that i used to think was old fogie age ). When might it have started ?  i often wish i discovered the hobby much much sooner when selling your grandfathers pocket watch at a boot sale for a few quid was just a way to offload some tat. And when might it slow down. Thoughts anyone ?
    • Yes i did eventually realise that the oil will act as a barrier, I'm sure the discussion will continue. Ive had two oleophobic coffees ( added coconut ) and in the meantime i have this just delivered to take my mind off epilame for the time being. My favourite type of dial, its a beautiful looking watch traditional English made and it runs,  the ticktock is phenomenal,  i can hear it across my living room .  You wont believe how much it was. Thats interesting about synthetic oils , i thought the same, going from a 2 year service to 5 years is a big drop in income for service folk.  I expect some did well when they embraced the use of synthetic,  probably drawing in more customers than those that didn't use the new fangled substances , i bet fairly short lived though. The more frequent service makes more sense to me, not for just the service but for the regular check up inspections that might pick up impending faults. As far as epilame goes, wouldn't it be great to be able to fumigate the complete movement in a sealed jar of heated stearic acid, 🤔 now theres a thought 😅.
×
×
  • Create New...