Jump to content

Watch repairer recommendations


Recommended Posts

51 minutes ago, Nucejoe said:

I think the hour hand is loose, best to uncase the movement, remove the minute and hour hand, peen the hole in the hour hand then reinstal the hands. Dial should protected just in case a tool slips as you press the hands on.

 

Thank you for your help but never done this before and I am so scared to touch this and maybe make it worse.

Ibought this back in 2020 and it still is going nowhere wrapped up in a case.

Terrible 

I reached out to marshall Sutcliffe on YouTube to see if he will have a look but no reply at all.

Can anybody remove the hands ?

Also did you see the picture I posted of the new stem ?

Does that look like the right one?

 

 

 

Link to comment
Share on other sites

4 hours ago, Gordie said:

never done this before and I am so scared to touch this and maybe make it worse.

Shouldn't personally attempt it then.  

4 hours ago, Gordie said:

Does that look like the right one?

Need to have number of dimention of its profile to tell.

 

Link to comment
Share on other sites

13 hours ago, Gordie said:

I have no skill to know or repair what is wrong

I think we need a clarification so I quoted something no skills to repair a watch correct? Is this an easy watch to fix may be but it requires skills. It's a Omega watch and as you noted finding a nice clean perfect older Omega watch is a challenge or maybe it's impossible? Having the problems you're having makes you wonder if the watch was really serviced at all. Sellers typically on eBay exaggerate the reality of the situation and usually don't backed up or guarantee what they've sold. Because if it had been recently serviced it should have a warranty and it should go back to wherever it came from.

If you've never done watch repair learning on an Omega watch is not a good watch to learn on. You need to find somebody who knows how to work on a watch and have them fix the problem. Otherwise things are going to really expensive really fast. Because there are not a lot of Omega parts out there. 

So to help us what is your watch repair skill level experience? Then can we get a picture of the inside of the watch in other words take the back off?

  • Like 1
Link to comment
Share on other sites

Hi  What JohnR725 has explained is spot on, without any prior experience the removal of the movement and re fitting of the hands without the equired skill level is frought with problems and as its an omega expensive ones and therefore best left to some one with experience.  Again pictures of the movement and any numbers are always informative.     cheers

  • Thanks 1
Link to comment
Share on other sites

  • 4 weeks later...

I have a very basic Seiko quartz (circa 1979) that is not working and looks a bit worn but has a lot of sentimental value.

I would like to find a very reliable person who will thoroughly clean and repair to new condition without removing the scratches.

How do I proceed?

Thanks.

Link to comment
Share on other sites

  • 11 months later...

I live in Thailand and have a Corum Admirals Cup with the rattrapante complication and it needs a service. Does anyone know of a watch repairer in Thailand who could do this for me. I have other watches to wear so can be without it or a while (perhaps this complication is of interest to the esteemed Mark for use in one of his videos). The watch is a recent acquisition and I doubt if it has ever been serviced so needs some loving attention as I don't even need to put it onto a timegrapher to see its daily rate is minutes rather than seconds out. There are lots of places advertising watch repair even one in Hua Hin where I live but I am reluctant to entrust this into the hands of an unknown repairer.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hello, I am about 5 months into watchmaking and I love it!   The attention to precise detail is what really attracts me to it. (and the tools!) I am working on a 16 jewel 43mm pocket watch movement.   There are no markings besides a serial number (122248) .  The balance staff needs replacement. The roller side pivot broke off.  I successfully removed the hairspring using Bergeon 5430's.  I successfully removed the roller using Bergeon 2810.   Did i mention I love the tools?! I removed the staff from the balance wheel using a vintage K&D staff removal tool  with my Bergeon 15285 (that's the one that comes with a micrometer adjustment so it can be used as a jewel press as well as a traditional staking tool...it's sooooo cool...sorry..  can you tell i love the tools?) No more digressing..  I measured the damaged staff in all the relevant areas but I have to estimate on some because one of the pivots is missing. A = Full length  A= 4.80mm  (that's without the one pivot...if you assume that the missing pivot is the same length as the other pivot (I'm sure it's not)  then A = 5.12 mm...(can I assume 5.00mm here?) F=  Hair spring collet seat  F=  .89mm   (safe to assume .90 here? .. I am sure that my measurement's would at least contain  .01 mm error ?) G = balance wheel seat  G = 1.23 mm  (1.20mm?) H  =  roller staff  H =  .59mm  (.60 mm?) B  = bottom of the wheel to roller pivot   B  = 2.97mm  (3.00 mm?)     here I am estimating  again because this pivot is missing. So my friends, and I thank you profusely,  can you point me in the right direction as to how to proceed? Do i buy individual staffs?  or an assortment?   Since I don't know exactly the name of the manufacturer, will that be a fatal hindrance?   Tbh, I'm not even sure what country of origin this movement is. Thank you!    
    • Thats why i asked that question earlier, what happens if lubrication is placed directly on top of epilame ?  As opposed to walled within its non epilamed area . I'm not saying its right, i have no idea , just asking questions. 
    • thinking of where epilam should be removed did you know there was a patent that covers this? At least for the escapement I'm attaching it. GB1057607A-1 epilame.pdf
    • Back home...printing now.  Will report results
    • Oh well, if Master @nickelsilver says it's the way to go, then it is the way to go! I stand corrected! 🫡 Are there any other places where you're supposed to remove the epilame from the contact point of rubbing? I don't think so! Thanks for the effort @Neverenoughwatches, much appreciated! 🙂👍
×
×
  • Create New...