Jump to content

Is this watch gold??

Jfarrar1982
 Share

Recommended Posts

clockboy Distinguished Member

clockboy

Posted
Posted

Agree with J. However found this on the net:

To perform this test to check if gold is real, make a light, tiny scratch on the item using a small nail file. Choose a spot that is not noticeable if possible. Use a dropper to apply a small drop of nitric acid to the scratch. If there is no reaction, then the piece is probably made from real gold.

Link to comment
Share on other sites
AndyHull Distinguished Member

AndyHull

Posted
Posted

It is highly unlikely to be gold, or even gold plated to any significant degree.

The watch is based on probably the lowest spec EB8800 movement.

Anything with even modest gold plating will generally have some indication on it that it is plated. Anything that is solid gold will, in my experience,  invariably have a hallmark of some description.

You can verify that it isn't gold in a number of ways, but most of them will be mildly destructive, if, as in this case, the body of the watch is a base metal.

Non omne quod nitet aurum est.

  • Like 2
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • KarlvonKoln
      B-Dip residue?

      By KarlvonKoln · Posted

      You could also use a very fine artist's brush to brush between the coils.  If you get a size 00 or even 000 that should be small enough for convenience, and with bristles so fine that they are incapable of damaging the hairspring.  Get a good one though, like Windsor-Newton or similar.  I have never had a Windsor-Newton brush shed on my art or other work.  You want a soft brush that will not shed.
    • Levine98
      Chinese clone demagnetizers

      By Levine98 · Posted

      Sounds interesting but how do you push the button if you’re holding both ends? the large current draw overheats after 3-5 seconds and the thermister triggers. A great tool for magnetizing things but I’ve not be able to ever demag anything with it because the emf is so strong it pulls the item off center (down or up).   I paid $89 bucks for it from  CAS-KER, if someone on the board wants it I’d gladly sell it for $25 plus shipping (probably US only otherwise postal costs are prohibitive). Just sent me a note offline.
    • watchweasol
      Seiko 7N22-7028 Movement Identification

      By watchweasol · Posted

      Hi. First thing to do is measure your oil movement as the vx32E and the 43 look very similar but one is a couple of mill smaller the vx32E.  Also the canon pinion heights differ attached tech sheets for 7N22. And  VX43, check details on the sheets. 7N22A_29A_33A_42A_43A.pdf VX43.pdf Hattori VX32E - Specification.pdf Hattori VX32E - Disassemble.pdf
    • oldhippy
      New guy from NC

      By oldhippy · Posted

      Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement. 
    • Neverenoughwatches
      404 Club

      By Neverenoughwatches · Posted

      I was spitting out flowers and leaves for 10 minutes,  fortunately 3  people saw it and promptly whipped out their phones to film the quick " nothing to see here " recovery  🤣🤣
×
×
  • Create New...