Jump to content

New crystal needed


Recommended Posts

Guys I'm after a new crystal for an old astral wrist watch, I've had a hunt through the sternkreuz catalogue but haven't seen a replacement ( might be the wood for the trees syndrome creeping in) .

Anyway it's an acrylic crystal but with an inner lip, I think the photo will explain it better, so any pointers on where I should be looking would be great, cheers guys

IMG_8086.JPG

Link to comment
Share on other sites

Check the Germanow-Simon catalog. I didi a cursory search and saw two that have that stepped lip you need. GS is in New York but if you need something I can contact for you. You'll need the exact diameter and height of crystal.

592ecab28a854_G_Ssnapshot.jpg.b19f3b4edd9f086385641e2a2008d85e.jpg

J

  • Like 1
Link to comment
Share on other sites

 

Check the Germanow-Simon catalog. I didi a cursory search and saw two that have that stepped lip you need. GS is in New York but if you need something I can contact for you. You'll need the exact diameter and height of crystal.

592ecab28a854_G_Ssnapshot.jpg.b19f3b4edd9f086385641e2a2008d85e.jpg

J

So that is what GS stands for. Germanow-Simon. You have tiptopcrystals also. That is very good and helpful. He has a lot of crystal that aren't on his page. So send him an Email. http://www.tiptopcrystals.com/index.php?main_page=advanced_search_result&search_in_description=1&keyword=PA459

Edited by rogart63
Link to comment
Share on other sites

guys apologies for not responding sooner, been abit busy with work,  many thanks for the responses, cousins doesn't have anything like it,  I tried the sternkruez catalogue and found one the same shape but it only come in one size which you've guessed it isn't the same as mine.

I'll try the G'S catalogue and also otto just in case. I have also contacted a smiths specialist here I the UK, they are being very helpful, first email sent late afternoon today and they were still advising me at 20.30hrs so very happy with them.

Edited by transporter
Link to comment
Share on other sites

Wish it did just need a polish mate, it did whilst I was inspecting it, but then the owner had it in her hands and she dropped it!!! So now I need to try and find and replacement, the lathe idea is good but unfortunately I do not possess one to do the job im afraid 

Link to comment
Share on other sites

  • 2 weeks later...
 

Alastair, many thanks for the advice, I can now highly reccomend Charles at watch glass cutting, he has come up trumps with a new crystal for the smiths Astral.

I emailed him and had good comms througout the process, I think I might of been a pain in the butt, but it wasn't my watch and it held huge sentimental value to the owner so I was a little twitchy about sending it away for a new crystal, something I've always done myself but on this occasion was unable to find the part myself, neither were my 3 watchsmiths!!

Anyway I can highly recommended Charles if you need a new crystal cut etc, a fantastic service that if needed I shall use again without hesitation, as I hope others will.

Link to comment
Share on other sites

Ah--Yes, Charles is good. He works from home and has all the gear to make glass crystals to any shape, even some sapphire ones, providing the shape isnt too weird...

He's the sort of guy that if he cant do the job exactly like it was, will come up with a good alternative, and will discuss any issues as he goes along...

  • Like 1
Link to comment
Share on other sites

 

Guys I'm after a new crystal for an old astral wrist watch, I've had a hunt through the sternkreuz catalogue but haven't seen a replacement ( might be the wood for the trees syndrome creeping in) .

Anyway it's an acrylic crystal but with an inner lip, I think the photo will explain it better, so any pointers on where I should be looking would be great, cheers guys

IMG_8086.JPG

If you could give the sizes i.e. Overall diameter,depth & size of lip.Maybe I have a spare in my stash. Is the lip inward or facing outward.

Link to comment
Share on other sites

Many thanks for the offer clockboy, I have the watch finished now, but I will give you the measurements so you can see if you have any lying around, according to Charles the one he fitted for me was a generic crystal, he must have better eyes than me as I struggled to find one of the correct size

Link to comment
Share on other sites

  • 5 years later...

Hi transporter,

This is an old thread, but.. I'm looking for a similar crystal for an Astral watch, and not having much success! Charles, mentioned above, seems not to be around any more and I've had no luck with the various catalogues and specialists.

Any ideas would be very gratefully received..

Many thanks! 🙂

Link to comment
Share on other sites

Hi Richard, thanks for that. The inside diameter is approximately 300 (the part which fits inside the bezel), and I suspect it would be 304-306 outside diameter (sitting on the bezel). The case is marked 1714/1. Thanks in advance. 🙂

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • can I ask why you're not happy? did you notice that the acceptable low 24 hour amplitude of this watch is 160°? is there any possibility that a watch company could manufacture a watch that could actually run at a low amplitude and keep time? so if they can run at 160° at 24 hours and keep time then they probably would keep time at 240° which yours seems to be doing? then if you're really unhappy with this I would recommend purchasing an original Omega mainspring. Just because the aftermarket have numbers like an Omega mainspring it doesn't mean it's the same thing. Then I would also recommend replacing the escape wheel and the pallet fork. This is what they do in the Swatch group service center if they are unhappy with anything on the other hand they have an infinite supply of spare parts.    
    • That was reason for asking for mark's input, i wasn't sure if going ahead with dealing with the contact information would be particularly well received. @oldhippy thoughts ?
    • @JohnR725 has pointed out many times that the Swiss don't care about amplitude, the timekeeping is the most important.  Give yourself a  pat on the back, great beat error and timekeeping, nothing to be disappointed about. 
    • I'm bothered but I agree he's a busy man and I don't want to bother him.  In the meantime, we really do need to have other ways of contacting each other  
    • This is as complicated as epilame, too many unknowns. The life expectancy in the UK is circa 80, so most people from 1944 or earlier are dead.  Assume they had children at circa 20, they died in 2004. Their children started selling 1944 watches in 2004, so pre-1944 watches must be getting more rare.   It doesn't work though because as you stated some were sold as tat, but since watch prices have increased people have decided to sell when they may not of done in the past. 
×
×
  • Create New...