Jump to content

Recommended Posts

Posted (edited)
16 hours ago, SeikoWatch said:

Nice Westclox but i'm not sure if this watch is made or powered by Seiko . Anyway , i've never known or heard it .

Westclox is an American  budget  brand. They once made their own movements  ,but later purchased them from outside vendors. Among  them Seiko and Jeambrun .Image search the westclox A 201 movement. You will find a seiko 66 variant produced for sale to non seiko assemblers. 

Edited by yankeedog
Posted
26 minutes ago, yankeedog said:

Westclox is an American  budget  brand. They once made their own movements  ,but later purchased them from outside vendors. Among  them Seiko and Jeambrun .Image search the westclox A 201 movement. You will find a seiko 66 variant produced for sale to non seiko assemblers. 

Thanks for the info. I assumed that most Westclox were simple and slightly crude pin levers. I'll keep an eye out for jeweled versions.

Posted (edited)

They used automatic  seiko movements  as well. A good place to find 7009s.For the most part they are cheaply cased.In the main unserviced and therefore  unmolested. 

Edited by yankeedog
Posted (edited)

RIMG0395.thumb.JPG.e183e53d4e183384fd70a128c68c5a5f.JPG

The HMT Rajat has come with us to the land of its birth.

GI_14.jpg

If you are ever in the south of India, you might want to make a trip to the HMT museum.

https://www.thehindu.com/society/janata-watches-and-braille-timepieces-a-visit-to-hmts-new-museum-in-bengaluru/article29109045.ece

If I had known about it last year when I was down there, I would have gone.

http://www.hmtmuseum.in/

Edited by AndyHull
  • Like 3
Posted

Just finished the overhaul of my Rego Chronostop pin pallet.  It has a single jewel, Lapanouse movement.  Had to fit a new crystal as the replacement that was on it didn't clear the second hand and was stalling the movement. The dial is perfect for a watch this old.  It is officially the LOUDEST ticking watch I own! :wacko: I kept the old ratty leather band,  it kinda adds to the charm.  I kind of feel like those old Remington shaver commercials,  where Victor Kiam liked the their razors so much that he bought the company.... well,  I just bought another one of these on eBay.:D

20200117_082541.jpg

  • Like 3
Posted
1 hour ago, AndyHull said:

RIMG0395.thumb.JPG.e183e53d4e183384fd70a128c68c5a5f.JPG

The HMT Rajat has come with us to the land of its birth.

GI_14.jpg

If you are ever in the south of India, you might want to make a trip to the HMT museum.

https://www.thehindu.com/society/janata-watches-and-braille-timepieces-a-visit-to-hmts-new-museum-in-bengaluru/article29109045.ece

If I had known about it last year when I was down there, I would have gone.

http://www.hmtmuseum.in/

Can you purchase watches on site? 

Posted
40 minutes ago, FLwatchguy73 said:

Can you purchase watches on site? 

I believe so. According to what I read on line, you can. You can also still purchase some models through their web site.


https://www.hmtwatches.in/

If I get a chance, I'm going to see if any of the local shops here in Dehradun still have any new old stock, but I some how doubt it.

https://www.hmtwatches.in/9/products/eco-friend-automatic.htm

The stock changes from time to time, so keep checking the site if there is something in particular you are looking for.

Posted
I finally got my Sicura Satellite completed and you better believe I'm wearing it proudly today even if no one knows the effort it took to get it here, lol.
20200115_060827.thumb.jpg.5aa5ca58628c3779c61bcadf1b29e04a.jpg20200115_060954.thumb.jpg.3a3dfe04b4468a40605247b97b05e13d.jpg
20200115_061009.thumb.jpg.e3f7517356011b09f417e0d81d2fd2d5.jpg


We know!!, Or at least have a good idea. Bravo!!


Sent from my iPad using Tapatalk
  • Thanks 1
Posted

I figure today I'd wear my newly acquired Vintage Timex Viscount from 1958. All it needed mechanically was to refit the auto wind mechanism that had become detached from the movement.  It's keeping fantastic time for a 62 year old "disposable" watch. I still need to polish the scratches out of the crystal and replace the ugly expansion bracelet.15794466035116614614607435832057.thumb.jpg.b8c4dbab0b6786a7157793cb166ecdef.jpg

20200119_003204.thumb.jpg.f3897fd9d5912fef375b3d972f95ce1f.jpg

  • Like 3
Posted (edited)

 A vantage...with st 92 movement  which I believe  to be a laco. I found the crown wheel, screw and bushing  loose  inside. Previous  owner never  heard of left hand thread.

20200119_140535.jpg

Edited by yankeedog
  • Like 2
Posted

My second Rego pin lever Chronostop arrived yesterday.  I cleaned it up this morning, looking nice.  Ticking loudly and keeping great time. Hunting for a black dial for this next. 

20200122_065422-01.jpeg

  • Like 1
Posted
2 hours ago, yankeedog said:

I take it the sub dials are for show.

They actually work. But not like a traditional chronograph.  The upper sub displays minutes, 45 in total. The bottom dial displays hours up to 6 total. When you pull out the crown to set the time, the sub dial hands move in unison with the main hands. The two pushers stop and start the seconds hand,  while the rest of the movement continues to run.  Im attaching a video illustrating that. 

  • Like 2
Posted (edited)

I have my Bellmatic on my wrist today. I love quirky mechanical complications. Someday I'll be able to afford a minute repeater. Im still hunting for a Seiko coffin link bracelet for it. 

20200123_063251.jpg

Edited by FLwatchguy73
  • Like 1
Posted
23 hours ago, Graziano said:

It's dark over here

Nice and sunny here.

RIMG0410.thumb.JPG.0b98ae4ef6c95e489c22a3b2d18bd596.JPG

The grapefruit and lemons are loving it. This is just a little one, some of the one high up in the tree are easily three times this size. 

The USSR era Sekonda (and the USSR era chap wearing it) are also enjoying the sunshine. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • No need for special tools. Loosen stud screw and just push hairpsring stud out of the hole.  Regulator arm is spring circled around the setting housing, insert cutting edge of a safety blade under it,  opposit ( 180 degrees) to regu arm itself, and pry  half of the circle up, you then see how it all is made at put together. Remove the mobile stud carrier as well,  reinstal in proper order, first goes on the stud carrier, second put the regulator arm on top and press it home. Exactly as nev explained above. Trueing inner coils is done when balance complete is seperated from the cock.   The part thats bent over itself. 1-Unbend hairspring as much as you can when balance is seperated, just grab the hairspring stud in tweezers , grab hairpsring with another tweezers streighten with  strokes as you  move the second tweezers  away from the stud. 2-Move stud carrier and regulator arm as wide/ apart as they go , to provide max space which comes useful in next step. 3- Fit hairspring stud, into stud carrier hole. 4- Put balance and cock ( when attached together) back on mainplate.  5- You have enough space to grab hairspring in  tweezers to shape as you move your tweezers  away from stud.         
    • Probably more than you need to know in these two vids, but sharing because I found them quite interesting. 🙂  
    • And then the problem of the stud holder and regulator which are on the wrong sides of each other:   I am baffled as to how this will have happened?  They can't re rotated into place, the regulator pins stop the spring stud from moving past. I don't think I can remove the regulator and/or spring stud without a staking set? 
    • Just to inform that this is not a shock protection, just end stone fixed in place by the spring.
    • I had the privilege to be put on secondment to RR Ansty just outside Coventry to help design and build a power station at the old Fort Dunlop site in Birmingham. The sound of those Trent engines when they fire up is something to behold.
×
×
  • Create New...