Jump to content

Do you remember your first time?


Pip

Recommended Posts

A bit of a moment for me today - officially resurrected my first dead watch! Not exactly a sought after classic, a defunct Seiko quartz V657-7100 that I got off the bay for a few quid. Not working, crystal that was too knackered to see through and full of crud. I took out the movement and gave it a bit of a sloosh, new battery, changed the crystal (first time for that too, loving my new screw down crystal/case press) and gave it all a bit of a polish with some Cape Cod. Although movement was officially working a day or so ago I've been waiting for the press for reassembly - my official timeline stopped when I got it all back together. Bracelets too **BLEEP** small though! And looking at the pics I may have to pop the crystal and align the bezel again.
But I'm a proud puppy. Woohoo! Onto the next one...

32314871306_172bc02299_z_d.jpg

  • Like 3
Link to comment
Share on other sites

  • 1 month later...
On 2/25/2017 at 3:02 AM, ricardopalamino said:

Any idea yet what your next one might be ???   Keep us posted and good luck .

Well at the moment Louis I have a couple of non runners on the go that are in the parts tray while I try and work out what's wrong, a Bellmatic (that I'm about to start trying to learn to remove rust from the movement) and a Seiko 66-6000 on the way that I have no idea what's wrong with it but is described as non working. And unfortunately I have the builders in so have lost half my house and most of my time, so not much chance to practice. Spending most of my time researching and reading.

Link to comment
Share on other sites

1 hour ago, Pip said:

Well at the moment Louis I have a couple of non runners on the go that are in the parts tray while I try and work out what's wrong, a Bellmatic (that I'm about to start trying to learn to remove rust from the movement) and a Seiko 66-6000 on the way that I have no idea what's wrong with it but is described as non working. And unfortunately I have the builders in so have lost half my house and most of my time, so not much chance to practice. Spending most of my time researching and reading.

Wow , If you are ready to attempt a service on a bellmatic my hat's off to you and I wish you good luck . I have never really been a Bellmatic fan , but it just so happens  that I picked up a free donor yesterday that has broken parts but a beauty blue dial and the original band .

  This watch has seen better days , but i picked up a running watch, head only , that is the same case as the non-runner . I hope to get one nice runner from the 2 watches .

I guess I was on a Bellmatics roll because I also picked up this Nice running specimen for a good price . It needs a new crystal that I am in the process of getting , but it has a coffin link Bracelet that I'm a sucker for . I have a coffin link on my Bulova Accutron Astronaut and I love it .

58b4c206715ce_ScreenShot2017-02-27at2_11_16PM.png.477aabf74e101786ee65d0b17b69ccb2.png

58b4c22ec0e47_ScreenShot2017-02-27at2_11_28PM.png.f715da7a4b038f867e7fb1e31dff4dd7.png

58b4c25115b5c_ScreenShot2017-02-27at2_11_41PM.thumb.png.d353dbf35c0d9910a97f75a6c0aad7ba.png

 

Do you have the Bellmatic / 4006 tech sheet ? It's quite long and involved and you may want to study it before you start your project .

 

If I'm not mistaken , the Seiko 66 morphed into the 6602 which tech sheets are also available .  You can go to the Seiko Citizen Watch forum and find those tech sheets and many other things Seiko and Citizen .

 

Link to comment
Share on other sites

Yes, BM's are very complicated I've read, but then one I have is junk at the moment so I can't make it worse. I have the tech guides and have also studied (and made a book of) the teardowns on another site so will be as prepared as I can. I've also just ordered the movement holder from Adrian, I figure every little will help!
Wish me luck...


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • H Watch Repairers—is there is a ‘standard format’ for the service marks or codes lightly engraved inside cases of pocket watches or wristwatches?   Sometimes I can see there might be a reference to year/ month but other times am confused. I’ve included an image of the rear of a 1951 Hamilton 992B Railroad pocket watch as an example. Thank you for all information you can give, Mike
    • Hi to Blackminou29–am a collector/ caretaker—good luck to you following your repair course—with hindsight I wish I’d pursued a career in both watchmaker/ jeweler fields—good luck with whatever career passion you engage.   Thank you Watchweasol for posting the amazing TZIllustratedGlossary! Best wishes, Mike
    • yes I noticed the new site and I miss the old site. It's the unfortunate problem of the Internet here today gone tomorrow sometimes some of the stuff gets backed up and sometimes well it does not then the problem with the early Seiko's were there were not necessarily designed for distribution across the planet and as such there is no customer support for them. So trying to find early stuff like technical information or sometimes even parts list for older Seiko is is problematic. But I did find you a you tube video. A quick look he seems to take a heck of a lot of time to actually get to the service single I did not watch all that but it does look like he did disassemble or started to say there's a tiny bit here  
    • RichardHarris123: Hello and welcome from Leeds, England.  I have family all over Australia, went as £10 poms Thanks Richard. Hope you’re able to visit your family here and that they’ve all done well 🙂 My relatives arrived from England in the 1790s transported on the ‘Second & Third Fleets’—a story of timber sailing ships, of convicts and doing well in this huge Country of Australia. When I visited the UK in the 1980s, I was too young to comprehend the depth and breadth of its history…  Best wishes, Mike William Chapman, my 4th great Grandad’s charges, at age 23 read at the Old Bailey; sentenced to 7 years of transportation to Sydney.
    • The whole process and the progress are closely observed, it's hand-driven and very controlled. I can't see the "danger", unless you are watching the TV while doing it. As you could have read, and in this quote "wheel" is the balance-wheel.
×
×
  • Create New...