Jump to content

Hello from South Wales.


Recommended Posts

Ive just joined after watching many of Mark's excellent videos on Youtube. They have taught me many things and reminded me of many I had forgotten...

I'm now 55 and slowly getting back into watch-repair. When in school at age 12 or so I used to mess around repairing, and by age 16-17 was OK-ish I thought, even tackling an Omega 861 with complete success. I would never contemplate doing one now however!

I Thought at the time that there was little future in watch-repairs as the Q revolution had taken a big hold so went into electronics repair instead I was pretty wrong!.....

Is the age of 55 too old to get back into this?--I dunno maybe, but with lots of loupes and glasses plus a £5 microscope from ebay I manage--so far!

I'm particularly into Accutron Tuning-Fork types and have a number of 'Vicims' I have four 214, four or five 218's, and a couple of 219's most running well

Recently Ive aquired a couple of ESA 9162 types One of these, a very poor Tissot looked as though it had had a very hard life and was used as a donor for others--Even the bezel is missing from the case, Both coils faulty, missing hour-wheel etc, Very sad condition but does have a nice blue dial.

I managed to fix the coils, (the windings themselves were good, or I wouldnt have stood a chance.) The TR coil had a broken transistor and the RC had a high value resistor (4M8 instead of 3M3) so both the res and cap were replaced (One benefit of being electronics engineer!). bought a new hour-wheel, serviced it now its working good, so the hunt for bezel is on....

This afternoon, I'm going to tackle an ESA 9164 in an Omega, See what sort of mess I can make of that!

 

 

  • Like 1
Link to comment
Share on other sites

Welcome back to a fantastic hobby. Like yourself I returned about a year ago after at leased 25 years away and I'm afraid being over 50 means your sight goes but some good loupes a pair of 3.50 reading glasses and good light work for me.

Link to comment
Share on other sites

Welcome Alastair belatedly, from me in Newcastle upon Tyne,

It is good to have young blood joining the forum and I am sure you have found a good home for your hobby amongst like minded folk.

Cheers,

Vic

Link to comment
Share on other sites

  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Yes i did eventually realise that the oil will act as a barrier, I'm sure the discussion will continue. Ive had two oleophobic coffees ( added coconut ) and in the meantime i have this just delivered to take my mind off epilame for the time being. My favourite type of dial, its a beautiful looking watch traditional English made and it runs,  the ticktock is phenomenal,  i can hear it across my living room .  You wont believe how much it was. Thats interesting about synthetic oils , i thought the same, going from a 2 year service to 5 years is a big drop in income for service folk.  I expect some did well when they embraced the use of synthetic,  probably drawing in more customers than those that didn't use the new fangled substances , i bet fairly short lived though. The more frequent service makes more sense to me, not for just the service but for the regular check up inspections that might pick up impending faults. As far as epilame goes, wouldn't it be great to be able to fumigate the complete movement in a sealed jar of heated stearic acid, 🤔 now theres a thought 😅.
    • Imm going to close the discussion by attaching the photo of my super-titanium after several vicissitudes finally working. Purchased as not working I replaced the battery and for a stroke of luck I found its semi-new solar panel which, having verified its operation, seems to recharge the accumulator perfectly. I had taken this watch almost by bet, with 40 euros I brought it back to life. The initial half idea was to resell it to finance another purchase, but.. it's definitely a nice item. It would need to check the impermeability but it's a pleasure to see it on the wrist 😃
    • In fact the secret is to go gently and find the way without forcing, and the movement enters without problems
    • Yea a have given it a full service this movement is chinese 2813 whats the lift angle for this movement does anyone knows  and how  do a remove the default  of 52 degrees on my timegrapher?   Hi you said my lift angle is default how do a remove this from my timegrapher?
    • Sure! Some very accomplished repairers never use epilame! I have often wondered if it is worth the trouble. Not using epilame will shorten the service intervals though, but that could be better perhaps both for the owner and the repairer!? Speaking of oiling, I just read this: After WWII in the 1950s the first Synthetic Oils came on the market. Most watchmakers did not rush to use these oils since they were bad for business now that the watch serviced with Synthetic oil would not come back to him for service for another 5-7 years he would lose a lot of income. ~Ofrei.com   Anyway, I wouldn't be surprised if it would be more correct to think of epilame as a binder rather than a repellant. Until convinced otherwise that's how I will think of epilame.
×
×
  • Create New...