Jump to content

Stare At This Dial For 10 Minutes And Tell Me What You See Please

w1n9m4n
 Share

Recommended Posts

Geo Distinguished Member

Geo

Posted
Posted

My tuppence worth.

I'm no expert, but you could have a redial here. The text looks like it is sloping down to the left, but that may be an aberration due to the photograph, the minute markers extend beyond some of the markers and not others and the printing doesn't look as sharp and crisp as it should be.

I can't comment on the font itself.

Link to comment
Share on other sites
WillFly Distinguished Member

WillFly

Posted
Posted

The only oddity I can see - and it may be the effect of the glass on the face - is that the batons at 5, 7 and 8 have a tiny dot just beyond them in the outer chapter of the face.

 

I can't see those dots anywhere else...

Link to comment
Share on other sites
w1n9m4n Member

w1n9m4n

Posted
  • Author
Posted

The big problem is ...the serial# is from 1968. Well Deville became it's own line in 1967 so a 1968 should not read both.(so I have been told) As far as omega being painted on....I have seen both on many ...could just mean the painted ones are redials or fakes.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Klassiker
      Epilame / Fixodrop

      By Klassiker · Posted

      I agree with @JohnR725. Oil on an epilamed surface is essentially the same as water on a waxed surface. The same physical properties are at work (surface tension vs. adhesion). 
    • Waggy
      Without Our Forum

      By Waggy · Posted

      I think we all get a lot out of this group, and it has been pivotal in my development by the sharing of knowledge, experience and learning from more seasoned experts such as @JohnR725 and others (you know who you are!) as well as fellow novices. I think that having a backup communication plan in reserve so that if there is a future problem just makes good sense. I don't think anyone is trying to undermine the forum, but if something unthinkable happens, like the Ranfft website for example, then it would be good if those who are willing can still keep in contact. Speaking personally, and I know I risk a charge of heresy, it would be good if Mark could be a little more visible in this forum, and maybe give any insight from time to time on the future/progress of forum and instructional videos etc. even if its just to confirm the status quo. I appreciate he is a busy man with a full time job, but so are most of the rest of us and to post a few lines every now and then shouldn't be too much to ask to reassure the restless villagers. Best outcome for me would be a message saying something along the lines of: "Hi guys, all good, no planned changes... enjoy the forum, will message again next month!" Just my two cents.
    • Endeavor
      Omega cal. 565 - low amplitude

      By Endeavor · Posted

      A nice looking watch !! Did you try 9010, instead of the 9415, on the pallet jewels / escape wheel? And if you did, did you notice a difference?
    • Waggy
      404 Club

      By Waggy · Posted

      Knocked out another 404 last night...when you are in the zone! This watch was a non-runner which I picked up as part of a lot of 8 watches, so works out to be $3.12 per watch. Before:   And the finished watch, new crown and stem and the crystal was cracked so was replaced. I also replaced the mainspring as the original was the old steel type spiral and very 'set' - all else is original: The Movement was a AS 1686, but in reading around a little the ACCRO watch company were sued for their use of the five point crown on their Jacques Pere range as it resembled Rolex, see below: ACCRO then reverted to just ACCRO on their watches - I have done some sniffing around the internet and haven't seen another example of ACCRO and the crown together on a dial so maybe I have something unusual, or maybe I was looking in the wrong places 🙂.  
    • Bonefixer
      Pocket watch escape wh

      By Bonefixer · Posted

      This watch was damaged when I got it. I didn't break the escape wheel pivot, and I bodged a fix with epoxy to see if I could get it running. I'm not yet ready to get into lathe work, or shellacking jewels, and may never be. But I'm learning plenty with each watch I tackle. 
×
×
  • Create New...