Jump to content

The end of my current employment


Recommended Posts

Well I have been a maintenance planner for 30 years. I have had companies request me back at times.

The current company that I work for have basically said to me that I am not performing well in any aspect of my job. I have been through misery for the last 15 months with the company and my current manager.

I finish up on Monday. I am getting a fair handout from the company so I suppose I should be thankful for that. I wish the next person all the best. I just wonder what they will do to him/her if they can't do everything?

Now I just have to find something else to pay the bills.

  • Sad 1
Link to comment
Share on other sites

Thanks @oldhippy I will not work as a planner again. I have had that much doubt put on me about every decision that I simply do not trust my decisions anymore. I have been second guessing everything.

As you may have read on other topics, I would love to make a go of watches and clocks. I just don't know if it is viable down here in Oz. I will ask some questions of the watchmaker that I am sending my Seiko back to. See what he says and go from there.

Just a bit angry and upset at the moment. Self medicating with Jack Daniels and Dry Ginger Ale. ?

Edited by Michael1962
  • Like 1
Link to comment
Share on other sites

It is different and also being close to Europe I presume. It is very different here, but there should still be the ability to survive out of watches or clocks.

I wish I understood the parts issue more than what I do. The second hand prices of the clocks over here that I showed you all as well does not fill me with much confidence.

And don't worry about the self-medication bit. I only have two drinks at most. ?

  • Like 1
Link to comment
Share on other sites

I'd be more concerned about your physical health,  having been busy working for thirty years,  I am afraid, retirement will be an invitation to ill health.

Whatever you choose to keep you busy, same amount of physical activity, no more, no less is certainly most suitable.

Good luck pal.

 

 

 

  • Thanks 1
Link to comment
Share on other sites

I'm sorry to hear that. But as one door closes, another opens. Perhaps it is in the bigger plan of of the The Great Master Planner for you at this moment.

Do not dwell in self pity and DO NOT succumb to alcohol. Take this down time to equip yourself with new skills so that you will emerge better and stronger tomorrow. 

  • Thanks 1
Link to comment
Share on other sites

Please guys, don't worry about the alcohol bit. It was just a tongue in cheek comment.

Tomorrow will see me get up in the morning and keep on preparing an old aluminium table & two chairs for repainting.

I am looking forward to getting that done as I am then starting on my Hettich table clock.

I will be sure to post up photos as I work on that.

I also have to get my synthesisers all connected up again as I have been chasing an electrical hum. I think I have found it now.

Onward & upward.

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

Hi Michael, Was out of the frame yesterday (Hospital).  Sorry to hear of your predicament, Companies all over want staff loyalty but are not loyal to staff. Add to that jumped up management(theorists) and its not a secure climate.  Like Old Hippy said its good to talk so keep us all posted. Glad you are keeping busy .Take car and safe you are amongst friends here.

  • Thanks 1
Link to comment
Share on other sites

I had a tiling business a while ago, but that is not a game that it easy to make money in. Keeps you fit though.

Having left the company I was employed by, they have paid for three months with an outplacement firm. The normal deal. Resume finessing, but these people also do the hard work in trying to get you interviews etc.

They also help with you setting up a business. I have slowly been sneaking things into the house tat I can use toward a clock business. When I mentioned that this outplacement firm also assist with setting up a business, I got "We're not starting up another business!!!"

Slowly, slowly, catchy monkey. ?

Link to comment
Share on other sites

Michael1962. Back in 1990 experienced the very same employment problems. ( in the UK ) Soon found alcohol was not the answer. After a time Turned a hobby of clock repairing into some income and biggest clients are those that have clocks of a sentimental value and quite willingly pay many times there value. Over here in UK clocks seem of low money tary value. Haven’t attempted watches, too small for me now. Your 30 years experience in a job speaks for itself. Don’t believe them what ever you decide.

Link to comment
Share on other sites

That really stinks Michael, especially since it seems like it had little to do with your qualities on the job but with the pettiness of another who was set over you. Prayers (if that is appropriate and welcome) for the journey from here forward. Glad you expressed yourself here and Im sure the support will continue from the members here.

Grace and Peace

Rev Chris Scrivens

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hi I got a Jaeger LeCoultre K911 movement, where one of the stems was broken. Part no. Should be 401.  Im based in Europe and tried Cousins but its discontinued there and cant find it on Google. Is there a way out to join the ends? Or an alternative movement to source parts from? 
    • The part was how it fell out of the movement - the train wheel bridge wasn’t screwed in.    I’ll probably dismantle the part, if I can, to work it out.    The train of wheels ran fine - it was only once the keyless works were installed I noticed the problem. 
    • Hello, I am about 5 months into watchmaking and I love it!   The attention to precise detail is what really attracts me to it. (and the tools!) I am working on a 16 jewel 43mm pocket watch movement.   There are no markings besides a serial number (122248) .  The balance staff needs replacement. The roller side pivot broke off.  I successfully removed the hairspring using Bergeon 5430's.  I successfully removed the roller using Bergeon 2810.   Did i mention I love the tools?! I removed the staff from the balance wheel using a vintage K&D staff removal tool  with my Bergeon 15285 (that's the one that comes with a micrometer adjustment so it can be used as a jewel press as well as a traditional staking tool...it's sooooo cool...sorry..  can you tell i love the tools?) No more digressing..  I measured the damaged staff in all the relevant areas but I have to estimate on some because one of the pivots is missing. A = Full length  A= 4.80mm  (that's without the one pivot...if you assume that the missing pivot is the same length as the other pivot (I'm sure it's not)  then A = 5.12 mm...(can I assume 5.00mm here?) F=  Hair spring collet seat  F=  .89mm   (safe to assume .90 here? .. I am sure that my measurement's would at least contain  .01 mm error ?) G = balance wheel seat  G = 1.23 mm  (1.20mm?) H  =  roller staff  H =  .59mm  (.60 mm?) B  = bottom of the wheel to roller pivot   B  = 2.97mm  (3.00 mm?)     here I am estimating  again because this pivot is missing. So my friends, and I thank you profusely,  can you point me in the right direction as to how to proceed? Do i buy individual staffs?  or an assortment?   Since I don't know exactly the name of the manufacturer, will that be a fatal hindrance?   Tbh, I'm not even sure what country of origin this movement is. Thank you!    
    • Thats why i asked that question earlier, what happens if lubrication is placed directly on top of epilame ?  As opposed to walled within its non epilamed area . I'm not saying its right, i have no idea , just asking questions. 
    • thinking of where epilam should be removed did you know there was a patent that covers this? At least for the escapement I'm attaching it. GB1057607A-1 epilame.pdf
×
×
  • Create New...