Jump to content

What's Your Opinion Of This Movement?


Recommended Posts

I'm currently looking at a watch which has 21 jewels and a double-ringed beryllium balance. The dial is very nice, but I've not seen a movement like this before.

 

What might be the point of the balance design, do you think?

 

Cheers,

 

Will

 

post-64-0-31028200-1414507335_thumb.jpg

  • Like 1
Link to comment
Share on other sites

Dial has something interesting, it notes "Jemaflex". A google search later, and it appears to be a method of adding flexibility to the balance wheel as shock protection for the pivots. Apparently related to Wyler's Incaflex. Stab in the dark but turns up often as a comparison.

Link to comment
Share on other sites

It looks like some of the jeweled pin-pallet movements I've worked on, especially the fact that there are no separate bridges which makes aligning the drive wheel pivots so much fun you'll be curled up under your work desk in the fetal position--trust me, I know.

 

JC

Edited by noirrac1j
Link to comment
Share on other sites

The 'hammer'ed finish, lack of shock protection and unsigned movement (not branded) fail to impress. Also if you count the jewels in the top plate.. there seem to be 5 wheels.. the one under the 't' in twenty looks like the escape wheel so what are the 2 capped jewels?

 

Basically this was from the dark ages of Swiss watchmaking... 

 

 

Anil

Link to comment
Share on other sites

  • 8 years later...
On 10/28/2014 at 9:42 PM, WillFly said:

I'm currently looking at a watch which has 21 jewels and a double-ringed beryllium balance. The dial is very nice, but I've not seen a movement like this before.

 

What might be the point of the balance design, do you think?

 

Cheers,

 

Will

 

post-64-0-31028200-1414507335_thumb.jpg

 

 

Hi. I have the same Buler beryllium balance movement, working great but I am looking (Buy?) for the glasses

 

Link to comment
Share on other sites

  • 2 months later...

The purpose of a watch's balance structure is to regulate the measurement of time. This is an important part that oscillates back and forth at a constant rate for the watch to display the correct time. The design of the balance also plays a role in impact resistance and durability, ensuring that the watch will withstand the wear and tear of the wearer's daily activities. After all, a well-designed balance wheel is essential for a watch to function properly and maintain its accuracy over time.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • My mentor has been using one of the Chinese clones for several years. Seems to work very well. Just put the object you wish to demagnetize in the centre of the cross and press the button. One word of caution though, the quality and QC of Chinese clones can vary a lot. You'll never know whether you got a gem or a lemon.
    • You could also use a very fine artist's brush to brush between the coils.  If you get a size 00 or even 000 that should be small enough for convenience, and with bristles so fine that they are incapable of damaging the hairspring.  Get a good one though, like Windsor-Newton or similar.  I have never had a Windsor-Newton brush shed on my art or other work.  You want a soft brush that will not shed.
    • Sounds interesting but how do you push the button if you’re holding both ends? the large current draw overheats after 3-5 seconds and the thermister triggers. A great tool for magnetizing things but I’ve not be able to ever demag anything with it because the emf is so strong it pulls the item off center (down or up).   I paid $89 bucks for it from  CAS-KER, if someone on the board wants it I’d gladly sell it for $25 plus shipping (probably US only otherwise postal costs are prohibitive). Just sent me a note offline.
    • Hi. First thing to do is measure your oil movement as the vx32E and the 43 look very similar but one is a couple of mill smaller the vx32E.  Also the canon pinion heights differ attached tech sheets for 7N22. And  VX43, check details on the sheets. 7N22A_29A_33A_42A_43A.pdf VX43.pdf Hattori VX32E - Specification.pdf Hattori VX32E - Disassemble.pdf
    • Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement. 
×
×
  • Create New...