Jump to content

My first steps in the dark arts

Pip

By Pip
in Watch Repairs Help & Advice

 Share

Recommended Posts

Pip WRT Addict

Pip

Posted
Posted

Since I’ve started tinkering I’ve considered hairspring manipulation to be some kind of black magic witchcraft, practiced by watchmakers who are quite probably in league with the Devil. So of course, it was only a matter of time!

 

Had a spare half an hour or so yesterday so I pulled out a mangled hairspring I’d put aside which was from a Seiko 6119 iirc, and set about it.

I’m by no means finished yet but I found the process both frustrating (trying to move the twisted coils to get to the one I wanted to manipulate) and very satisfying when one loop goes back about where it should.

 

If anyone has any hints or tips feel free to shout!

 

I started with this:

1184b89ec3b4ab986371edea2f7c42c0.jpg

 

Took it off the balance to reveal:

b7f74bc23c0e4e4ec87ec54b03d8041c.jpg

 

And after half an hour or maybe a bit more got here:

29392f52ead7eb786e2df3e40ea01c89.jpg

 

I’m pleased so far but won’t get another chance to tackle it until the weekend.

 

I also have another one that is lovely and concentric but is a fantastic cone shape. No idea yet how to tackle that, but I’m sure some of you will point me in the right direction.

 

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites
quantieme WRT Addict

quantieme

Posted
Posted
13 hours ago, Pip said:

 

Since I’ve started tinkering I’ve considered hairspring manipulation to be some kind of black magic witchcraft, practiced by watchmakers who are quite probably in league with the Devil. So of course, it was only a matter of time!

 

Had a spare half an hour or so yesterday so I pulled out a mangled hairspring I’d put aside which was from a Seiko 6119 iirc, and set about it.

I’m by no means finished yet but I found the process both frustrating (trying to move the twisted coils to get to the one I wanted to manipulate) and very satisfying when one loop goes back about where it should.

 

If anyone has any hints or tips feel free to shout!

 

I started with this:

1184b89ec3b4ab986371edea2f7c42c0.jpg

 

Took it off the balance to reveal:

b7f74bc23c0e4e4ec87ec54b03d8041c.jpg

 

And after half an hour or maybe a bit more got here:

29392f52ead7eb786e2df3e40ea01c89.jpg

 

I’m pleased so far but won’t get another chance to tackle it until the weekend.

 

I also have another one that is lovely and concentric but is a fantastic cone shape. No idea yet how to tackle that, but I’m sure some of you will point me in the right direction.

 

 

 

Sent from my iPhone using Tapatalk

 

 

Link to comment
Share on other sites
quantieme WRT Addict

quantieme

Posted
Posted

you have done well there to get to that in half an hour , it is definitely one of the more challenging and frustrating aspects of watch repair.

i believe the method for a coned hairspring is to hold the collet and the outer coil and pull through the spring in the opposite direction, good luck with it all.

  • Like 1
Link to comment
Share on other sites
vinn3 Distinguished Member

vinn3

Posted
Posted
18 hours ago, Pip said:

 

Since I’ve started tinkering I’ve considered hairspring manipulation to be some kind of black magic witchcraft, practiced by watchmakers who are quite probably in league with the Devil. So of course, it was only a matter of time!

 

Had a spare half an hour or so yesterday so I pulled out a mangled hairspring I’d put aside which was from a Seiko 6119 iirc, and set about it.

I’m by no means finished yet but I found the process both frustrating (trying to move the twisted coils to get to the one I wanted to manipulate) and very satisfying when one loop goes back about where it should.

 

If anyone has any hints or tips feel free to shout!

 

I started with this:

1184b89ec3b4ab986371edea2f7c42c0.jpg

 

Took it off the balance to reveal:

b7f74bc23c0e4e4ec87ec54b03d8041c.jpg

 

And after half an hour or maybe a bit more got here:

29392f52ead7eb786e2df3e40ea01c89.jpg

 

I’m pleased so far but won’t get another chance to tackle it until the weekend.

 

I also have another one that is lovely and concentric but is a fantastic cone shape. No idea yet how to tackle that, but I’m sure some of you will point me in the right direction.

 

 

 

Sent from my iPhone using Tapatalk

 

   there are videos AND  books that show "this art".   vin

  • Like 1
  • Confused 1
Link to comment
Share on other sites
mikepilk Distinguished Member

mikepilk

Posted
Posted
23 hours ago, quantieme said:

you have done well there to get to that in half an hour , it is definitely one of the more challenging and frustrating aspects of watch repair.

i believe the method for a coned hairspring is to hold the collet and the outer coil and pull through the spring in the opposite direction, good luck with it all.

I had a hairspring that was badly coned. You have to stretch it a LONG way before you have any effect on the shape. There's a risk it will break at the  collet.

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Murks
      Digital Watch

      By Murks · Posted

      does anyone knows what type of battery this digital Watch takes?  
    • Neverenoughwatches
      Second hand watch market.

      By Neverenoughwatches · Posted

      Hello good watch folk ,I  just fancied a light hearted discussion after my head was starting to spin over Epilame 😅. Specifically I'm meaning the sale of vintage watches, say nothing past the 1980s market. The stuff we see on ebay and other similar sites and found at carboots, curio shops etc. And are  we thinking its reaching a peak volume ?  Younger generations clearing out passed parents and grandparents possessions.  The younger folk are not as sentimental as the old fogies ( I'm now nearly at an age that i used to think was old fogie age ). When might it have started ?  i often wish i discovered the hobby much much sooner when selling your grandfathers pocket watch at a boot sale for a few quid was just a way to offload some tat. And when might it slow down. Thoughts anyone ?
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      Yes i did eventually realise that the oil will act as a barrier, I'm sure the discussion will continue. Ive had two oleophobic coffees ( added coconut ) and in the meantime i have this just delivered to take my mind off epilame for the time being. My favourite type of dial, its a beautiful looking watch traditional English made and it runs,  the ticktock is phenomenal,  i can hear it across my living room .  You wont believe how much it was. Thats interesting about synthetic oils , i thought the same, going from a 2 year service to 5 years is a big drop in income for service folk.  I expect some did well when they embraced the use of synthetic,  probably drawing in more customers than those that didn't use the new fangled substances , i bet fairly short lived though. The more frequent service makes more sense to me, not for just the service but for the regular check up inspections that might pick up impending faults. As far as epilame goes, wouldn't it be great to be able to fumigate the complete movement in a sealed jar of heated stearic acid, 🤔 now theres a thought 😅.
    • Albyon
      AS2031-57E solar panel - mission: impossible

      By Albyon · Posted

      Imm going to close the discussion by attaching the photo of my super-titanium after several vicissitudes finally working. Purchased as not working I replaced the battery and for a stroke of luck I found its semi-new solar panel which, having verified its operation, seems to recharge the accumulator perfectly. I had taken this watch almost by bet, with 40 euros I brought it back to life. The initial half idea was to resell it to finance another purchase, but.. it's definitely a nice item. It would need to check the impermeability but it's a pleasure to see it on the wrist 😃
    • Albyon
      Insert the movement inside the case

      By Albyon · Posted

      In fact the secret is to go gently and find the way without forcing, and the movement enters without problems
×
×
  • Create New...