Jump to content

Anyone buying watches online? Risky?

DJW
 Share

Recommended Posts

DJW Super WRT Addict

DJW

Posted
Posted

I found this website (I won't say the name because I don't want to appear to be promoting this site) where they offer watches for a very low price if they can get a predetermined number of people signed up to purchase them..

I just committed to buy this Victorinox Ambassador Automatic Chronograph Watch for $399... These watches are all brand new either from an authorized dealer or from the factory. But some offer no warranty but others do offer a full factory warranty. I think I'll take my chances with this one since the retail is over $1,900...

So tell me what you guys think? Would you take a chance online without actually looking and holding and feeling a watch? What's your preference?

MD-21410_20160608101003_fa664c7ef8399312.jpg

Link to comment
Share on other sites
StuartBaker104 Distinguished Member

StuartBaker104

Posted
Posted

If it looks too good to be true then it probably is.

There are "broker" sites that sell some high value watches at a discount which do sell legitimate watches - do your own research :-) As I understand it, some manufacturers require their authorised dealers to take certain quantities of certain watches in order to be able to stock more popular pieces.  Sometimes these dealers need to offload these other watches, but are not allowed to advertise them below the authorised price... hence the brokers.  I bought my speedy pro this way and have no reason to doubt its authenticity.

  • Like 1
Link to comment
Share on other sites
DJW Super WRT Addict

DJW

Posted
  • Author
Posted

I did do research.Tgey seem legitimate.. .and have previously purchased a watch prior...I should receive that first watch next week..I'm just nervous until I receive my first watch from them...then evaluate it and them. 

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted (edited)

I'm not sure which kind of risk we're talking here. If it's about not receiving the real item, when paying with PayPal, and/or a Credit Card, the buyer is 100% protected, even for items lost or stolen in transit. That even if the price paid is ridiculously low, as thread full of believer demonstrated on another forum.

If the risk is that the watch is not up to promise, that would be subjective. But there are plenty of online reviews to help decide. For sure, it is an high quality watch.

BTW. If you read industry news, it's public knowledge that the ETA group has an excess production, and the Swiss in general are not growing anymore. Maybe this sales liquidation is a consequence of that.

 

Edited by jdm
  • Like 1
Link to comment
Share on other sites
  • 2 weeks later...
DJW Super WRT Addict

DJW

Posted
  • Author
Posted
 

I did do research.Tgey seem legitimate.. .and have previously purchased a watch prior...I should receive that first watch next week..I'm just nervous until I receive my first watch from them...then evaluate it and them. 

Well, all is not good. Received my first watch from the website and, although it did ship with a 2-year factory warranty, it appears to have an issue with the movement. The escapement is terribly noisy! I've already opened a service ticket for a warranty repair...

IMG_20170711_232927.jpg

Link to comment
Share on other sites
DJW Super WRT Addict

DJW

Posted
  • Author
Posted
 

Try eliminating noise in the room, adjusting gain on the instrument, and let it run for 48 or more hours.

Unfortunately, my timing machine is a cheap one...no adjustment for gain. I can actually hear the irregularities with my ear when I hold the watch close. It is keeping reasonable time, actually great time. Only lost a few seconds in the last 24 hours...but I'm very fussy about having a watch run cleanly and without irregularities...

Link to comment
Share on other sites
DJW Super WRT Addict

DJW

Posted
  • Author
Posted
 

What watch do you have on the timer? Just curious.

I've bought watches on line but only from a known reputable bricks and mortar store. I don't think I'd buy a watch on line otherwise.

 

It's a inexpensive watch, Spinnaker. It has a Seiko NH 35 movement.. I only paid $99

IMG_20170712_090113.jpg

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
 

Unfortunately, my timing machine is a cheap one...no adjustment for gain. 

Yes, it has it, I've had one like that before. Just press up/down while measuring. Also turning around the watch on the holder may help in getting a more correct reading.

Link to comment
Share on other sites
Mitchel New Member

Mitchel

Posted
Posted

Hello,

There are many reliable shops online for purchasing genuine pieces at discounted prices. It is important to research the site you plan to purchase from, and I suggest purchasing a low priced piece to have a look at how the process goes and what kind of product you receive before making any large investment.

Another good evaluation of a reliable watch source is to email them as well as call them for inquiries and further information about the piece you're interested in. The reliable sources are very knowledgeable and will take the time to work with you as their customer.

If you have any doubts, ask that their return policy be emailed to you so you have it in writing, but my experiences have fortunately been very positive purchasing online. Known as the "gray market," you're purchasing a genuine product without the manufacture's warranty (or exuberant price), however many online shops offer their own warranty on the product (Jomashop out of New York for example).

Hope this helps!

  • Like 1
Link to comment
Share on other sites
digginstony Super WRT Addict

digginstony

Posted
Posted

These cheap timegraghers are limited but for what they are, they are excellent. As Jdm said, let it run for a while. Then try in the 3 positions, crown up, crown down, vertical with crown to the left. If no better send the watch back if possible. Spinnaker are very good value with a sound movement, normally.
If you need too, a replacement movement is around £40 including tax and postage

Sent from my SM-T585 using Tapatalk

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      My first Gruens. Precision 510 and N510R movements.

      By ManSkirtBrew · Posted

      Just missed it! I have a donor movement on its way. But thank you for the offer--I'll let you know if I need anything else.
    • Razz
      404 Club

      By Razz · Posted

      My latest. Timex 2465. Replaced the crystal, caseback gasket and spring bars. All in less than $5US. Added a gray NATO strap I already had in stock.
    • GuyMontag
      My first Gruens. Precision 510 and N510R movements.

      By GuyMontag · Posted

      I have some Gruen 510's in my donor pile if you need parts.
    • Randy55
      DIY Cleaning Machine

      By Randy55 · Posted

      I've been intrigued by everyone's input here...so I decided to give this a shot. I bought the"typical" Pearl watch-machine basket and trays, for about $65. The trays are good,..the housing is a nightmare ! Thought it would take the mixer off my bench at anything above about 200rpm. The housing is cast of course,..and it's not "true" at all...so the harmonic vibration was insane. So,..I bit the bullet and bought the Elma housing and top. Not the baskets though, as the Pearl one's fit the Elma. Saved a bunch there. The basket and lid came to about $80 with shipping. The opening in the Elma top is 8mm, and the shaft that came with my stirrer is 6mm. I bought a piece of steel tube, 8mm O.D., and 6mm I.D. Cut off about an inch of the tube, and drove the rod into it. Gives a really snug fit.... Lightly champfered the leading edge of the 8mm section, then lightly tapped it into the top of the Elma lid. Spins like a dream now So... I have about $240 total into this including jars and steel mesh for the wave breakers   I'm pretty happy Best to you all   Randy
    • ManSkirtBrew
      My first Gruens. Precision 510 and N510R movements.

      By ManSkirtBrew · Posted

      Still haven't gotten around to getting stems or screws, but I did make my first attempt at polishing a case. I just used a soft mop and rouge to reduce my odds of ruining them, and I think they came up pretty nice. Also gave the crystals a polish on the same wheel while I was at it. They were both very badly scratched up. The one on the left is fairly beat up, but it'll still make for a decent presentation.
×
×
  • Create New...