Jump to content

Any Advice On A Nice, Accurate Vernier Gauge?

WillFly

By WillFly
in Watch Repairs Help & Advice

 Share

Recommended Posts

Geo Distinguished Member

Geo

Posted
Posted (edited)

I tend to use Mitutoyo, they are excellent..........but I bought a cheap Chinese one and in all honesty it works just fine. Whatever you make sure you get a metal one and not a cheap plastic one.

The cheap one was the same as this one:-

http://www.ebay.co.uk/itm/150mm-ELECTRONIC-DIGITAL-CALIPERS-VERNIER-WITH-LCD-INC-HARD-CASE-/290679682771?pt=UK_Measuring_Tools_Levels&hash=item43addbf6d3

Edited by Geo
Link to comment
Share on other sites
bobm12 Distinguished Member

bobm12

Posted
Posted

ooops! I got the cheapo! In any case, I haven't had any issues with it either, but the all metal one will be my goal if Bergeon -- which keeps coming out with more and more different tools -- allows it!

Link to comment
Share on other sites
RosscoInOshawa WRT Addict

RosscoInOshawa

Posted
Posted

FWIW, I've got a Mitutoyo true vernier scale caliper (metric and imperial), an import dial vernier caliper and a Brown and Sharpe 1 inch micrometer with carbide faces all of which I use in the machine shop that range in price from $20 - $30 CDN although the micrometer was not bought new but second hand.

 

I find the imports are fine too for the most part but have heard if you buy a digital caliper to keep an eye on the batteries as they tend to leak and ruin the internals.

 

Starrett is the ultimate in some machine shop circles but very, very pricey.

 

Rossco

Link to comment
Share on other sites
carl Member

carl

Posted
Posted

I have a digital Mitutoyo, and a conventional Moore and Wright. I have had them for 26 and 29 years respectively and have never had an issue with accuracy or battery usage. I have changed the battery in the Mitutoyo 10 times over the years and it does a fair amount of work.  As for micrometers I user Moore and Wright. as with the conventional vainer callipers I have had my micrometers for 29 years and again never had a problem with accuracy. 

  • Like 1
Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

At the beginning of the month I bought a JKA FEINTASTER comparator in as new condition. For this horology lark it really is the business. I have a couple of jeweling jobs to do and having watched Mark's video, I thought it was the way to go.

post-124-0-38865000-1406208407_thumb.jpg

  • Like 1
Link to comment
Share on other sites
Legarm WRT Addict

Legarm

Posted
Posted

At the beginning of the month I bought a JKA FEINTASTER comparator in as new condition. For this horology lark it really is the business. I have a couple of jeweling jobs to do and having watched Mark's video, I thought it was the way to go.

 

I would love one of these, but the budget and wife, won't allow it.

So I bought a reasonable quality 0.001mm micrometer and formed a small piece of aluminium around the shaft, which will also slide to allow normal use of the tool.

It is excellent for Jewels as they sit flat on the arc of the sleeve.

 

post-227-0-85804800-1406712198_thumb.jpg

 

post-227-0-41349800-1406712231_thumb.jpg

  • Like 2
Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

I bought a reasonable quality 0.001mm micrometer and formed a small piece of aluminium around the shaft, which will also slide to allow normal use of the tool.

It is excellent for Jewels as they sit flat on the arc of the sleeve.

 

What a delightfully simple yet effective solution to a fiddly problem. I like it!

Link to comment
Share on other sites
  • 2 weeks later...
clockboy Distinguished Member

clockboy

Posted
Posted

I use a cheapo Chinese vernier which I tend to use a lot and is great for most measurements. However I have a Mitutoyo micrometer for more the accurate readings. However I wish I had a Comparator as the micrometer can be real fiddly when measuring jewels etc.

Link to comment
Share on other sites
Legarm WRT Addict

Legarm

Posted
Posted

I use a cheapo Chinese vernier which I tend to use a lot and is great for most measurements. However I have a Mitutoyo micrometer for more the accurate readings. However I wish I had a Comparator as the micrometer can be real fiddly when measuring jewels etc.

 

 

 I bought a reasonable quality 0.001mm micrometer and formed a small piece of aluminium around the shaft, which will also slide to allow normal use of the tool.

It is excellent for Jewels as they sit flat on the arc of the sleeve.

 

Close up.jpg

 

Close up 2.jpg

Posted 30 July 2014 - 10:24 AM

Link to comment
Share on other sites
Mark Distinguished Member

Mark

Posted
Posted

At the beginning of the month I bought a JKA FEINTASTER comparator in as new condition. For this horology lark it really is the business. I have a couple of jeweling jobs to do and having watched Mark's video, I thought it was the way to go.

Good choice. I purchased mine from a seller in Germany on the eBay.de website - it cost significantly less than buying it here in the uk. Think it cost me about £100 all in with postage which is a bargain but I had to do a little work on it to make it perfect. And the wooden box is prone to splitting but a bit of PVA sorted that out.

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites
  • 5 months later...
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      My first Gruens. Precision 510 and N510R movements.

      By ManSkirtBrew · Posted

      Just missed it! I have a donor movement on its way. But thank you for the offer--I'll let you know if I need anything else.
    • Razz
      404 Club

      By Razz · Posted

      My latest. Timex 2465. Replaced the crystal, caseback gasket and spring bars. All in less than $5US. Added a gray NATO strap I already had in stock.
    • GuyMontag
      My first Gruens. Precision 510 and N510R movements.

      By GuyMontag · Posted

      I have some Gruen 510's in my donor pile if you need parts.
    • Randy55
      DIY Cleaning Machine

      By Randy55 · Posted

      I've been intrigued by everyone's input here...so I decided to give this a shot. I bought the"typical" Pearl watch-machine basket and trays, for about $65. The trays are good,..the housing is a nightmare ! Thought it would take the mixer off my bench at anything above about 200rpm. The housing is cast of course,..and it's not "true" at all...so the harmonic vibration was insane. So,..I bit the bullet and bought the Elma housing and top. Not the baskets though, as the Pearl one's fit the Elma. Saved a bunch there. The basket and lid came to about $80 with shipping. The opening in the Elma top is 8mm, and the shaft that came with my stirrer is 6mm. I bought a piece of steel tube, 8mm O.D., and 6mm I.D. Cut off about an inch of the tube, and drove the rod into it. Gives a really snug fit.... Lightly champfered the leading edge of the 8mm section, then lightly tapped it into the top of the Elma lid. Spins like a dream now So... I have about $240 total into this including jars and steel mesh for the wave breakers   I'm pretty happy Best to you all   Randy
    • ManSkirtBrew
      My first Gruens. Precision 510 and N510R movements.

      By ManSkirtBrew · Posted

      Still haven't gotten around to getting stems or screws, but I did make my first attempt at polishing a case. I just used a soft mop and rouge to reduce my odds of ruining them, and I think they came up pretty nice. Also gave the crystals a polish on the same wheel while I was at it. They were both very badly scratched up. The one on the left is fairly beat up, but it'll still make for a decent presentation.
×
×
  • Create New...