Jump to content

Ultrasonic Watch Cleaner


Alaskamick

Recommended Posts

I use a small ultrasonic jewellery cleaner which is a perfect size for cleaning watch cases and bracelets.

Normally I use it with just warm water and a spot of washing up liquid.

What would be the recommended proper cleaner to use and should I rinse after the cleaning is complete?

If so what would you recommend.

Thanks for any advise, Mike

Link to comment
Share on other sites

Washing up liquid is ok to use but I don't find it the most effective on really caked up cases and bracelets.

I actually use Morrisons own brand "Savers" all purpose cleaner diluted 1:1 with water. It's really cheap and very effective, and just requires a rinse in hot water.

I don't know if there is anything specially made for watch cases but I doubt that it would be much more effective, and can guarantee that it would be a lot more expensive.

Needless to say this is just for cases and bracelets, movement parts go through L&R chemistry in an Elma cleaner.

  • Like 1
Link to comment
Share on other sites

10 hours ago, Alaskamick said:

I use a small ultrasonic jewellery cleaner which is a perfect size for cleaning watch cases and bracelets.

Normally I use it with just warm water and a spot of washing up liquid.

What would be the recommended proper cleaner to use and should I rinse after the cleaning is complete?

If so what would you recommend.

Thanks for any advise, Mike

Hot water and a bit of dish soap works good for me- the hotter the water the better.  If there is any exposed brass I'll add a small amount of vinegar to just to shine it up.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Interesting interpretation of "traditional". I would say that Loctite is definitely the up-to-date and appropriate stuff to use, however, it is a relatively modern solution. Before the advent of such esoteric solutions I believe that the "traditional" thread locker of choice may well have been a sugar solution. Once applied the water would evaporate and the sugar would crystalise, locking the threads tight.
    • @steve1811uk close but no cigar 🙂 I don't smoke anyway. I checked in my stock of parts and that's the closest I got to your dimensions. Good luck in your search. @RichardHarris123 I have an accumulation of all sorts of odds and ends that I acquired as a result of buying up the tail ends of old watchmakers estates. Usually after all of the great stuff has been stripped out, which means that the sweepings off of the workshop floor can be had for peanuts, but if you have the patience, can often be found to contain gold (both literally and figuratively 🙂 ). These came to me through on of those purchases. I doubt that I will personally be able to make use of even 10% of my accumulated stock, but having it, and knowing what I have, means that I can at least pass bits on to those who can use it whenever possible.
    • Hi and thank-you for your suggestions, as per Mark's instructions I checked my browser "Safari" and spell check and grammar was not ticked. So all sorted. Thanks CJ  
    • As an alternative, clear nail Polish, the advantage is you can have a manicure at the same time. 
    • I use Grammarly. It works really well and If English is not your first language, you will also receive help with formulations. There is a free version that covers most of my needs. It installs as a plug-in and works with all browsers and word processors.
×
×
  • Create New...