Jump to content

Ok, Come on, Own Up, Who Outbid Me this Morning?


Recommended Posts

I spotted a brand new ETA 7753 on the bay last week, incorrectly listed as a 7750, I thought, oh, I could grab a bargain here, so place my bid, and I was the only bidder right up till midnight last night, but seeing the auction ended at 5am today, I upped my bid a little, sadly not enough, awoke this morning to find someone beat me by $5 bucks, bagging themselves a brand new ETA 7753 movement for $345 bucks.  Damn it.

 

So who was it who outbid me, come on, own up ;)

  • Like 3
Link to comment
Share on other sites

16 minutes ago, SSTEEL said:

27 jewels, and the complications, and date quickset via pusher @10, safer to change date than a 7750, which if you try and change the date between 10pm and 2am on a 7750 you can easily damage the setting gear.

Doesn't happen with the Chinese! http://watchguy.co.uk/valjoux-7750-terminal-date-change-feature/
And muuuch cheaper too :)

Link to comment
Share on other sites

Just for the record it wasn't me :ph34r: but I use Goofbid same as CB and it seems quite successful, especially for my American bids to go to my sons address.  I have called a halt to any further purchases as I have old watches falling out of cupboards here now and I am that busy playing with my Grandaughter and generally enjoying life, food, drink etc. that I have not touched a watch (apart from changing batteries for friends) for ages.

Cheers,

Vic

Link to comment
Share on other sites

Keep in mind however that if you're beaten by $5, that is just the minimum bid increase amount, not what the winner had actually bid. You will  never know how much that was. Also consider that an appropriate bids go hand-in-hand with experienced snipe bidders..

Link to comment
Share on other sites

22 hours ago, Mark said:

It wasnt me Mickey, But really, you should be using bid sniping software which is no doubt what the winner was using :)

This is the one I use and had a good amount of success with in the past - for £2.50 it was a no-brainer:

https://itunes.apple.com/gb/app/auction-buyer-bidding-snipe/id608292802?mt=12

I will be giving this one a try. However for Mac uses such as myself it is not straight forward in fact 11 steps are needed to make it work on a Mac. I will set it up when time <_<

  • Like 1
Link to comment
Share on other sites

On 9/27/2016 at 0:08 AM, SSTEEL said:

I spotted a brand new ETA 7753 on the bay last week, incorrectly listed as a 7750, I thought, oh, I could grab a bargain here, so place my bid, and I was the only bidder right up till midnight last night, but seeing the auction ended at 5am today, I upped my bid a little, sadly not enough, awoke this morning to find someone beat me by $5 bucks, bagging themselves a brand new ETA 7753 movement for $345 bucks.  Damn it.

 

So who was it who outbid me, come on, own up ;)

It wasn't me. but it was probably someone in the U.S. judging by auction ending.

JC

Link to comment
Share on other sites

23 hours ago, SSTEEL said:

Will take look at that CB.

The seller has been in touch and said the winning bidder with 0% feedback hasn't paid yet, and if they don't pay by the weekend they will send me a second chance offer, so fingers crossed.

You might want to have a look at these reviews on ebay sniping software and sniping strategies:

http://andrewminalto.com/best-ebay-snipers/ 

https://www.thebalance.com/sniping-on-ebay-the-good-the-bad-and-the-ugly-1139904

some that I have spoken to in the IM/IT world in Canada have tried this free service and the reviews aren't bad so far as its an online service so you don't need to have your Mac or PC on when the bidding occurs:

http://www.auctionstealer.ca/home.cfm 

And just for the record, I didn't bid on this either. 

 

  • Like 2
Link to comment
Share on other sites

22 hours ago, clockboy said:
2 hours ago, MilTimeCan said:

You might want to have a look at these reviews on ebay sniping software and sniping strategies:

http://andrewminalto.com/best-ebay-snipers/ 

https://www.thebalance.com/sniping-on-ebay-the-good-the-bad-and-the-ugly-1139904

some that I have spoken to in the IM/IT world in Canada have tried this free service and the reviews aren't bad so far as its an online service so you don't need to have your Mac or PC on when the bidding occurs:

http://www.auctionstealer.ca/home.cfm 

And just for the record, I didn't bid on this either. 

 

Is that auction stealer limited to Canada though?

Link to comment
Share on other sites

On 9/27/2016 at 8:55 PM, SSTEEL said:

Will take look at that CB.

The seller has been in touch and said the winning bidder with 0% feedback hasn't paid yet, and if they don't pay by the weekend they will send me a second chance offer, so fingers crossed.

Sniping only prevents the let me peek and see who high the highest bidder may have gone (by bidding) as well as reducing the number of bids overall. high number of bidders is like blood in shark infested waters.
If not for the above one could just bid once at their realistic highest bid anytime during the auction.

 

I would be a bit leery of a second chance offer. I've never accepted one since shill bidding will never be controlled by e-bay. The high bidder bid on two separate items from the same seller and is listed as 85% bidding activity with that seller. That bidder could be an acquaintance of the seller who lives elsewhere and owes him/her a favor.
Study the sales and completed items and you will see a ridiculous number of watches that are sold then relisted...again and again. clearly these were not real bidders.

 

Lastly, while this wasn't a misspelling that is presently caught through the e-bay algorithm (most of the time). E bay buyers are quite shrewd and would easily have noted the discrepancy with the number of jewels. This shrewdness also becomes quite evident when there is a bargain watch or movement out there that no one is bidding on. When this happens there is usually a red flag  on the item that might be difficult to discern.

 

Good luck bidding in the minefield known as e-bay.

Link to comment
Share on other sites

There are some dodgy deals on eBay for sure. I have been told some get friends or even themselves using a different account to start the bidding to get a item moving in the right direction. 

Ebay is not perfect but it,s the best available. For me I only use Snipper when I am not available for the final minutes of an auction. I only put in a bid that I think is a reasonable price & if I get out bid then whoever out bid me just paid to much. I have noticed in the past some get carried away with the bidding process and finish paying more (tools is a good example) than the new item is anyway. When purchasing a tool I look at the price of a new one first. I also check out the star rating of the seller & check out the history. Be suspicious when the seller has only been trading for a few months but has loads of positive ***** ratings over this period. Again I suspect friends or himself with another account are helping with the rating. 

Link to comment
Share on other sites

Be suspicious when the seller has only been trading for a few months but has loads of positive ***** ratings over this period. Again I suspect friends or himself with another account are helping with the rating. 

Yes good rating can be bought that way but it's not cheap at 10% of the rating. One known example is a Japanese scammer that built rating selling cheap cosmetics and then hit the unsuspecting buyers of non-existent Grand Seiko.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Thanks, ManSkirtBrew.  I started looking for a setup like yours and ran across this.  It was about half the price of the JKA Feintaster (depending on what auction you were in), and it's a Bergeon.  I bought it because I thought the price was fair (eBay - Buy it now), and I'm a sucker for vintage tools. It also has a table, so it should be easy to use for measuring jewels. I wonder if the the contact points can be changed out. Bergeon seems to manufacture new tables and accessories for the contemporary dial version. What do you guys think of it? I'm sorry this post seems to have taken a detour. I'm new here so let me know if I should start a new topic.
    • This is a flying cutter, usual one. The cutter itself is shown in the pictures in the first message, it is made of broken tungsten carbide drill bit. I asure that all the angles of the cutter are as they should be. I have video - little older one - that I made when onse making the same kind of winding pinion for a Poljot 2200, which is even smaller than this one. It is not easy to see in the video, but the tool rest moves about 1mm towards the object in Y direction and then returns back untill cutter is rotating. Then the spindle is rotated one tooth ahead and everything repeated untill all teeth are cut.
    • After a bit further research could it possibly be an AS 970?
    • Latest project was a non-running ebay purchase with an FHF70 movement. I stripped and cleaned it, reassembled it, and got it running. So far so good, nothing damaged AFAIK.  I was oiling the top jewel on the balance (the one in the cock) which was a slightly unusual shock setting. I removed the spring (3 leaves) which was part of a chaton holding the cap jewel. This left the hole jewel behind which I retrieved with rodico and then lost it. I was taking it off the rodico, very gently as I thought, with tweezers, and then it just disappeared.  Fast forward a week, I got a donor movement, non-running, with the plan to just take the shock jewel that I’d lost. It was the same movement but had standard incabloc settings, and was steel rather than copper/brass.  I changed the cock and balance complete and it ran, not very well. I switched the lower jewel setting, cleaned and oiled both jewels and the replacement balance. Without the pallet fork the balance swings very nicely with a puff of air. With the fork in place, balance out, it flicks side to side nicely with power in the mainspring.  Put them together and it doesn’t run. The impulse jewel sits in the fork and it stops.      Any suggestions how I proceed? In case you didn’t follow that I have 2 FHF70 movements, nothing broken as far as I can tell, but mixing up the balance wheels and jewel settings results in a non runner. 
    • Oh and this almost perfect third wheel pivot and slightly set mainspring  Ah ok yes i see what you mean, good idea. I'll try that if i fluff this one up. The image isn't great quality but i like the idea though.
×
×
  • Create New...