Jump to content

I think I've seen it all on ebay when it comes to crap


oldhippy

Recommended Posts

27 minutes ago, Brian3 said:

Unbelievable what some people will try to sell.............do you think anyone will be crazy enough to place a bid?? A scrap merchant perhaps??

I would think there are many who don't know what they are or what they are used for.

  • Like 1
Link to comment
Share on other sites

On 15 September 2016 at 5:22 PM, chrisdt said:

I have a Long case clock thats been in the garden for 40 years so I might buy then!!!!

Yikes!  Now I know why my wife didn't like the piano we spied in a garden once.

44 minutes ago, oldhippy said:

There for a Longcase.

Yep.  Tried once to cast something similar for one of the fancy round pieces I was missing using a existing one for a pattern.   It was okay but I had to use it on one of the back pillars on the top where it would be least noticeable.  Nowadays I suppose one could scan it and print it out of resin or plastic on a 3-D printer using a cellphone.  Bogles the mind sometimes.  Of course it doesn't take much to bogle my mind.  

Link to comment
Share on other sites

2 hours ago, vinn3 said:

what is your cure for rusty clock parts?  vinn

There is no cure vinn.  chrisdt's "garden clock" will always and forever be a garden clock.  

Way back when I started I used naval jelly, sandpaper and steel wool.  Didn't know any better.  Ruined quite a few things.  Now it would depend on the parts and where the corrosion is. YouTube and google are amazing as is JB Weld.  Internal parts if I can't restore the working surface to good enough, then I buy or fashion a new one.  Have a friend who is a tool and die guy and he gave me lots of advice on tools and techniques in the beginning.  Now that I am into watches he gets a kick out of all the tiny "tools" we use, like staking and jeweling sets and the tiny broaches I have.  Looking forward to getting a watchmaker's lathe setup and see his face light up.  He works with Bridgeport mills and lathes setup that weight tons.  

Decorative parts like in the eBay ad in the start of this thread I used to take to a local plater I knew from restoring old nickel plated pot belly stoves.  I wouldnt do anything to them, just brought the whole set to him and let him do his magic.  He was amazing and always made me happy with what he could do.  Went out of business a year ago due to local government codes.  It's part of the reason I am moving on from clocks to watches.  Other part is I was getting bored with clocks.  Only clock that intrigues me right now is a Atmos clock and if I can find one cheap enough that needs help I will probably buy it.  

The good thing about rusty clocks is they are cheap or free to pick up.  I am cheap and love the challenge.  Here in Minnesota so many people put things in their basements for storage.  Damp basements are not good for clock movements or their cases, not sure what damp basements are good for...keeping fish is all I can think of.  I love craigslist ads listing broken clocks.  Get's me going.  Sick huh?

All that being said, my work is not museum quality.  I have high standards and when it suits me as good enough, then I move on.  Trial and error and never quitting.  Might be the answer you are looking for.    

Link to comment
Share on other sites

On 9/19/2016 at 11:55 PM, bobm12 said:

Guys allow me to add an observation and hopefully a correction, that garden clock will not always be a garden clock...it may transform itself -- given enough time and imagination -- into a garden gnome! :)

 

Funny and true.  One could help it along and cut off the base and make the top bit a gnome house, complete with door.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Might that be the viscous nature of oil resisting gravity H  ,  we have been comparing water and hydrophobic surfaces which are similar in principle but water is much less viscous than oil. I guess what we trying to discover is if epilame also has an adhesive trait as well as being oleophobic. Plus the oil dropet has very little mass for gravity to work on, like watching tiny water beads that can grip onto vertical glass until they are connected together to increase their mass then run down. 
    • But it also makes it seem less susceptible to gravity. If you place a droplet of oil on an epilame-treated surface the droplet of oil will still stay in place even if you then flip the surface from a horizontal to a vertical position. That is, the oil droplet remains anchored, and that's the purpose of epilame. If it was just a matter of creating an oleophobic surface we could probably use other, less expensive, methods!? I don't know @Waggy but my gut feeling tells me you're spot on (pun intended!). I believe the oleophobic property is a side effect of epilame which is designed to keep the oil anchored.
    • Saturday morning 27/4 Sunday evening 28/4 Monday evening 29/4 Floor has a drain in the middle so I am hoping that there is very little fall on it, if any. Room is about 2.5 x 2.5 metres square. Can only use about 1/2 of one wall on the right of the pictures which has a sliding glass door in it. And only about 3/4 of the wall to the left of the pictures as it has the door to the house in it. Progress. 🙂 
    • This makes much more sense now, the oil is withdrawing itself to make as little contact with the epilame as possible. Same principle as wax on a car creates a hyrophobic surface that makes the cohesive properties of water molecules pull together.  The water beads run off only when under the influence of gravity but still remain cohesively beaded up. And as mentioned earlier a pivot would keep the oil in place on a cap jewel.  Epilame on an escapement would be a different scenario, there is nothing to hold the oil in position if gravity tugs at the bead to move, plus the escape teeth pull the oil about Maybe this is why its suggested to run the watch for a short while to remove the epilame to make two oleophobic surfaces either side of the oil, creating a ring of fire 🔥 around it 😅 The oil is repelled by every surface of the epilame even that which it sits upon. So the oil pulls together to make as little contact with it as possible, but the oil cant float above that area, it can only sit there on top of it. Under gravity the oil could potentially run away as an oil bead, unless the epilame has an adhesive property which i dont think it does ? So something else keeps it in position ie a pivot under a cap jewel . But that isn't the case in a pallet jewel situation. 
    • As with every skill it watchmaking, it takes practice. Notice at the top of the document it says, "Practical work - 40 hours".  I can get the balance wheels 'close enough' to flat, but never seem to get them perfect. Same with gear wheels. Guess I need more practice.
×
×
  • Create New...