Jump to content

Cheap Pegwood


Recommended Posts

A while ago in another posting I mentioned that I was getting some "Cuticle Sticks" as used by manicurists etc.

 

My research had indicated that they are made from orange wood ie the same as our pegwood !

 

I have received them from the bay and total cost for a pack of 100 was £1.99 (with free P&P as well).  They are 4½ inches or about 115 mm long, chamfered at one end and pointed at the other and seem to fit the bill.  Just the right length for my hand.

 

post-197-0-50571400-1456406162_thumb.jpg

 

Just thought I would share - if you are thinking about getting some make sure orange wood is mentioned in the description.

 

Cheers,

 

Vic

  • Like 6
Link to comment
Share on other sites

A trace for "100 Pcs nail art orange wood sticks" from uk suppliers may be fruitful ramrod or pm me. I checked my skewers Folkvisor but mine are bamboo so I am unsure if they will have the same properties as orange wood. It's all a bit of fun really, last time I bought 4 mm peg wood from a "proper" supplier it cost me more than 3 times what I just paid and there was a postage charge.

Next I am going out into the nature reserve near me to check out the Elder trees so I can take the pith

Cheers,

Vic

Link to comment
Share on other sites

Can confirm that the stuff I got has turned out to be excellent, sharp points on all 100 and no apparent substandard wood. Perhaps it is because of the original intended use in manicuring the quality was kept high.

Cheers,

Vic

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I'll have a look for it, but don't hold your breathe. Failing that I'll make another video when another bezel needs to be removed.
    • The UK lots can be a 404 hit or miss, 6 - 10 watches can come in anywhere from 20 - 50 quid. I once had a 404 division of 8 watches for a fraction over 30 quid, one of them was a Smiths Astral model National 17 an absolute certainty for winner contender. The crystal was scrached up to the point of being very difficult to see the brand, something triggered a gut feeling in me and it paid off.
    • I just picked up this Mondaine quartz watch on tradera.com for £11. It's a non-runner so I will replace the Ronda movement (£10.95 at Cousins), polish the case, replace the case-back gasket, and replace the mineral crystal. Now, the problem is finding a suitable crystal. The original crystal is slightly domed (2.4mm thick dome), measures 36.4mm in diameter, and is 1.3mm thick at the edge. The closest I can get on CousinsUK is 36.5mm in diameter, 3.1mm thick dome, and 1.5mm thick at the edge. I think the replacement crystal would look OK, but the problem is finding a suitable glass gasket. The case diameter for the glass gasket is 36.9mm and the closest glass gasket I can find on CousinsUK is either 36.8x36.0mm or 37.0x36.2mm. I guess one of those glass gaskets could work but as you can see there's no way the 36.5mm domed crystal would fit the inner diameters of those glass gaskets. I guess I will have to give up on a domed crystal, no? So, the backup plan is to use a (1.5mm) thick flat mineral crystal as the diameters come in increments of 0.1mm. But, what glass gasket would be the better option? The one with an outer diameter of 36.8 (0.1mm too small) or the one with an outer diameter of 37.0mm (0.1mm too large). Again the case diameter for the glass gasket is 36.9mm. I believe I read or heard that the crystal diameter should be 0.1mm wider than the inner diameter of the glass gasket. Is that correct? I'm sorry for all the numbers. I've tried to make it as clear as I could. So, I'd appreciate your thoughts on this. BTW, measuring and sourcing crystals and gaskets is extremely time-consuming! 😓
    • Lots to choose from... Just sayin'.
×
×
  • Create New...