Jump to content

Hello from North Carolina

longbowforge
 Share

Recommended Posts

longbowforge New Member

longbowforge

Posted
Posted

I posted an introduction on Saturday & don't see it so I'll try again. I found a tool kit & would like to see if it looks like a good one to the seasoned members. No tag on the box & it's missing the base.

I made a post, but waiting for administrator approval. 

Link to comment
Share on other sites
barnfind New Member

barnfind

Posted
Posted

New here, I found this site searching for information on some old watches I found going through some things in the attic left behind by my parents and grandparents. A few of which were some old watches in among my grandfather's things, who was born in 1876, and my dad's things who likely had them in the 1940's and 50's.

I also have a box of 80's watches, mostly Timex that were mine or my dads from the 80's that were packed away 25 or so years ago that I'd like to get working again. 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      Oh well, if Master @nickelsilver says it's the way to go, then it is the way to go! I stand corrected! 🫡 Are there any other places where you're supposed to remove the epilame from the contact point of rubbing? I don't think so! Thanks for the effort @Neverenoughwatches, much appreciated! 🙂👍
    • JertiNeron892
      ETA 555.232 documentation

      By JertiNeron892 · Posted

      If you're seeking advice for your "Harvard GSD" MArch II application essays, I'd recommend taking a thoughtful approach. Reflect deeply on your experiences, passions, and goals, and tailor your essays to showcase your unique perspective and potential contributions to the program. As for resources, I recently stumbled upon a gret platform for essays, and I must say, it's been quite helpful. Their selection of pre-written essays covers a wide range of topics, and their professional writers can also assist with custom essays tailored to your specific needs. Check out their offerings here: https://essaypro.com/essays-for-sale. Remember, authenticity is key in your application essays. Good luck!
    • ManSkirtBrew
      Accutron 218 transistors

      By ManSkirtBrew · Posted

      For clarity and ease of testing, I redid that diagram, flipping the circuit to match the layout of the physical watch.
    • noirrac1j
      Rolex 2235 escape wheel jewel setting replacement

      By noirrac1j · Posted

      Hello, Thanks for the reply. The old jewel will get pushed out from the "outside" which is the dial side. The new jewel will get pressed in from the inside (shown below) which is the movement side, correct?     And the old jewel and spring will get pushed from the is the "outside" which is the dial side. Thank you very much for the information. I will take out the KIF spring and save it. Will update when the new jewel is in place!   Regards, Joe
    • Marc
      AS2063 - hand setting

      By Marc · Posted

      It's a little circlip style retaining clip to keep the pinion from riding up out of position.
×
×
  • Create New...