Jump to content

Recommended Posts

2 hours ago, Waggy said:

I thought Cartier signed one of the numerals as well  ? Anyway that movement is pretty darn rough

1 minute ago, Neverenoughwatches said:

I thought Cartier signed one of the numerals as well  ? Anyway that movement is pretty darn rough

No its pretty all darn rough. The tanks I've  ever looked had the backs screwed down.

Link to comment
Share on other sites

Cartier is my thing. - well one of my things anyway.

You're okay with that.

1970's movement - Cartier has been fairly nomadic over the years with who they commissioned to supply their movements.

That's a 1970's women's tank movement made by - I want to say MST but not totally sure. These days they're all made by sellita but they've been round the houses over the years with different ebauche makers.

Couple of examples of the same movement below.

 

 

wqqwqw.jpg

s-l225.jpg

Edited by 316lad
Link to comment
Share on other sites

While Cartier did use ETA 2512 movements in some watches, the only gold plated cases I know of are from the "Must" collection, which were gold plated silver. These have "Must de Cartier" on the dial, and usually the back, and usually say "argent" on the back, with a hallmark, and the word Vermeil, and "plaque' or 20 microns" or similar. I'm quite sure that they didn't do any other plated cases. Could be wrong, but this one looks fishy to me, poor engraving and dial quality too.

Link to comment
Share on other sites

1 hour ago, 316lad said:

Cartier is my thing. - well one of my things anyway.

You're okay with that.

1970's movement - Cartier has been fairly nomadic over the years with who they commissioned to supply their movements.

That's a 1970's women's tank movement made by - I want to say MST but not totally sure. These days they're all made by sellita but they've been round the houses over the years with different ebauche makers.

Couple of examples of the same movement below.

 

 

wqqwqw.jpg

s-l225.jpg

A serial number on the caseback would be lovely to see.

Link to comment
Share on other sites

2 hours ago, nickelsilver said:

While Cartier did use ETA 2512 movements in some watches, the only gold plated cases I know of are from the "Must" collection, which were gold plated silver. These have "Must de Cartier" on the dial, and usually the back, and usually say "argent" on the back, with a hallmark, and the word Vermeil, and "plaque' or 20 microns" or similar. I'm quite sure that they didn't do any other plated cases. Could be wrong, but this one looks fishy to me, poor engraving and dial quality too.

Plated silver or gold doesn't have hallmarks. 

Link to comment
Share on other sites

22 minutes ago, RichardHarris123 said:

Are you @316ladsaying that it's genuine ?

I'll stick my neck out here and say yes, I do.

The dial's a bit iffy but the rest is fine. Not a great era for Cartier - the early 70's - has to be said. Gold/ silver plating (why not solid), etc.

The OP expresses scepticism about the authenticity because one of the numerals isn't signed - usually the "7" as they are these days. Cartier didn't start doing that until about 2004. This is a '70's watch.

That's a bit like someone expressing the same doubt about a Rolex Sub from the '80's - because it doesn't have the laser etched crown on the crystal or the engraving and the serial number on the rehaut.

As I say - it was a low point for Cartier horologically - the early '70's, until they got their mojo back in the early '80's and started producing the iconic re-issue of the SS and gold Santos, etc, and then they were elevated back to where they belong; Watch as pure, beautiful jewellery. Interesting brand over the years.

 

Got a women's Santos on the bench at the moment - you can see the "7" hasn't the vertical Cartier - and this is from 1993.

Nice watch - has seen some abuse. Always tricky to gauge what the customer expects me to do  in terms of Resto. Probably best just to polish it up a bit - you can - the gold bezel IS solid Gold - as are the screws on the bracelet.

So, you see within 15/ 20 years of making the OP's ebay watch - Cartier had got their sh1t back together.

Still a bit of a rubbish movement though - ETA by this time.

IMG_0519.jpg

IMG_1494.jpeg

Edited by 316lad
  • Like 1
Link to comment
Share on other sites

11 minutes ago, 316lad said:

The edges aern't "Crude" they're time worn down.

Take a look at a slightly better example:

https://vintagewatchoutlet.com/products/cartier-tank-manual-wind-18k-gold-electroplated-vintage-1970s-mens-watch-23mm-1

 

Where’s the photo of the back of that watch- or any Carrier tank with an ‘electroplated’ snap back case. I’ve never seen one like that before. If the watch in question is definitively from the 70s there should be pictures of others out there…

now I see the other photos, yes…

Edited by rehajm
Link to comment
Share on other sites

13 minutes ago, 316lad said:

 

The edges aern't "Crude" they're time worn down

 

well, yes. it is similar to the watch in better condition- but both are certainly more crude than the usual design….and worn down bad enough to be that rough but haven't worn through the plating, as has happened on the front corners?

Yowza- imma pass and let someone else enjoy the deal on this one…

Link to comment
Share on other sites

14 minutes ago, rehajm said:

well, yes. it is similar to the watch in better condition- but both are certainly more crude than the usual design….and worn down bad enough to be that rough but haven't worn through the plating, as has happened on the front corners?

Yowza- imma pass and let someone else enjoy the deal on this one…

I think that's a good move but not necessarily because of your scpeticism about it being a fake.

It represents a "dud" period in Cartier horology. Collectors aern't interested in this stuff - neither does it particularly grab the eye - design or build-wise.

If the OP has thoughts about doing some Resto and selling it on - I'd pitch my bid at no more than £500 - though I suspect it will go for far more than that. But that doesn't make it validated.

I adore Cartier - but I wouldn't bother with it - it's representational of dark days - Quartz Crisis was blowing a Hooley, nobody knew what to do, marketing people flapping about, etc. It has nothing to mitigate it's "cheapness" and oppotunism in a dynamically changing Swiss watchmaking industry in crisis.

And Cheap - was never a Cartier selling point anyway.

It would be a pass from me too.

Edited by 316lad
  • Like 2
Link to comment
Share on other sites

14 minutes ago, 316lad said:

I'm sorry - I can't teach you how to surf the Internet.

I was willing to listen to your opinion because I have read that Cartier produced some pretty average watches in the past.  But please don't question my intelligence, the link you provided only had on photo. 

  • Like 1
  • Sad 1
Link to comment
Share on other sites

Just now, RichardHarris123 said:

I was willing to listen to your opinion because I have read that Cartier produced some pretty average watches in the past.  But please don't question my intelligence, the link you provided only had on photo. 

I'm so sorry if you thought I was - I was questioning my own ability to teach with my own limited intelligence.

Link to comment
Share on other sites

36 minutes ago, RichardHarris123 said:

Are you @316ladsaying that it's genuine ?

The question is what is genuine?  Cartier is essentially known for designing and making jewellery so Cartier didn't make the movement. Cartier cases have serial numbers, there is no serial number so they didn't make the case, and their cases are held together by screws. If they employed another company to make the case , did someone else also make the dial. At best Cartier commissioned someone to make it, so its not really Cartier. There are a few examples on ebay the same as this, not sure if we can use that as evidence for it not to be fake unless we are suggesting only one fake has been made. Surely the Cartier tank is in the top list for most copied and faked watch of all time. Understandably i cant figure out why a world renowned Jeweller would put their name to this.

 

1 hour ago, rehajm said:

Where’s the photo of the back of that watch- or any Carrier tank with an ‘electroplated’ snap back case. I’ve never seen one like that before. If the watch in question is definitively from the 70s there should be pictures of others out there…

now I see the other photos, yes…

 

  • Like 2
Link to comment
Share on other sites

59 minutes ago, 316lad said:

I'm so sorry if you thought I was - I was questioning my own ability to teach with my own limited intelligence.

This is a friendly site, every one pitches in and helps each other.  The advanced members must sometimes roll their eyes at the questions we amateurs ask but they do their best. 

I have not come across such a arrogant member as yourself on here before and hopefully I won't do again.  

  • Like 1
  • Sad 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Ok, with the parts You have, the easiest thing to do is vibrate a new hairspring, of cousre for 16800 BPH. A couple of balance screws will be not enough, at least 3-4 aditional couples will be needed. And this if You have that many free holes. And cutting 75 teeth table for the contrate wheel is the other reasonable option Different things may have happened to the clock - the contrate wheel may have be replaced from another modification, the platform may not be original, the hairspring may have been replaced and vibrated for 18000 or the entire balance may have been replaced wit the wrong one...
    • I also agree with @mikepilk and @Waggy. Your readings look good. The amplitude drop between the horizontal postion and the vertical position is nice and low (only 18° difference).  The delta of 17 sec (-3 to +14) between those positions is absolutely ok. If you really wanted to improve on this, I think you'd have to look into the poising of the balance wheel (not the spring, which looks perfect). But that's a total overkill for this kind of movement. Leave it be.
    • I've just finished refurbishing a Memostar Alarm with AS 1931 movement (same as 1945 but with date and running at 21600). I was also surprised how many parts are available at Cousins. Like you, I was missing the alarm stem (Cousins stock them) and I needed new crowns. It's a nice simple movement for an alarm, easier to service than a Seiko Bell-Matic. BTW I made a note in my Servicing spreadsheet: "Pull out winding stem before removal".  It may have just been wear on my movement, but I found that the yoke could move out of the clutch if the stem was removed in the normal position (like some ETAs).  You might find this interesting     
    • I picked up this alarm watch at a flea market several months ago and recently decided to investigate.  I am not finished, but well on my way. As you can see, there was significant water damage.  Running these parts through my L&R cleaner was not enough to clean them, so I did manual cleaning with one-dip and cotton swab (the dense pointed kind).  The wig-wag was stubborn--the two gears would not release from the plate.  I soaked it in Kroil overnight and that did the trick. There was some rust on the balance staff, but not actually on the pivots themselves.  Nevertheless, I chucked it a step-chuck on my lathe and burnished the pivots. The watch is running and I have confirmed that the alarm drive train is functioning.  Since I am missing a stem for the alarm, I have not done the final assemble of the alarm components.  Surprisingly, there are lots of parts available for this movement on Cousins.  I will probably get a couple of stems and maybe some other parts that I deem necessary. The watch is running at weak amplitude (about 190) and shows some poising issues.  I will work on that. The last two pictures are after partial reassembly.    
    • Hello and welcome to the forum.    Enjoy
×
×
  • Create New...