Jump to content

Recommended Posts

Posted

An aquatance asked me to have a look at his milgauss, this is what I found. The case is heavy and all parts feel and look correct ref no 116400gv green crystal.Has the Rolex emblem etched on the crystal. The bracelet has correct screw pins, the caseback is solid and feels smooth when unscrewing. Then I phoned him to tell the good news. And he informed me he paid 100 dollars. The case is worth more than the movement. 

IMG_20210319_163541.jpg

IMG_20210319_163525.jpg

IMG_20210319_163405.jpg

IMG_20210319_163330.jpg

IMG_20210319_163304.jpg

IMG_20210319_163014.jpg

IMG_20210319_162920.jpg

Posted

This is a strange marriage of a watch the movement is not a Rolex but strangely the case might . Look at the Crystal with a LED light and by the 6 there will be a Holograph of the Rolex crown. If it has it is almost certainly genuine. 

Posted
34 minutes ago, clockboy said:

This is a strange marriage of a watch the movement is not a Rolex but strangely the case might . Look at the Crystal with a LED light and by the 6 there will be a Holograph of the Rolex crown. If it has it is almost certainly genuine. 

Hi clockboy, zoom in on the 3rd picture you will find the Rolex hologram there at 6 o'clock. 

Posted

I very much doubt that the case is anything other than fake, why would anyone take a genuine case and fit a cheap nasty auto movement in it, the clues are there anyway the case is stamped 18k and the strap is stamped steelinox could it be that someone has fitted a genuine steel strap to a genuine 18k case? very much doubt it, the Chinese knockoffs have been etching crystals as soon as the genuine ones hit the shops.

It is a Chinese fake

Posted (edited)
1 hour ago, wls1971 said:

I very much doubt that the case is anything other than fake

You are correct 100 dollars is a dead givaway 

tenor.gif

Edited by Graziano
Posted

I agree the case is fake being stamped 18K and yes the Chinese laser etch the crystals too.

This is not one but the Chinese do make fake watches of quality nearly as good as the Rolex which always amazes me why they don't just make their own brand of that quality.

Yes at first it still would only sell for 1/4 to 1/3 of a Rolex but once it establishes its own brand identity they could increase the price and be sold in all high street shops, not just the 'black market' and the volume of sales would make it worth their while.

Posted

The problem the Chinese have always had is maintaining quality, they can produce some very good stuff but always let themselves down with consistency, pretty much the same as the Russians, it must be a communist trait.

Posted
7 hours ago, Graziano said:

Hi clockboy, zoom in on the 3rd picture you will find the Rolex hologram there at 6 o'clock. 

OK it’s a fake. The hologram on a genuine Rolex is not visible unless it is under a strong LED light and even then it is well hidden.  

  • Like 1
  • 5 months later...
Posted
On 3/19/2021 at 2:35 PM, wls1971 said:

it must be a communist trait.

Yep, but the biggest mystery of all is that some many fall for that ideology which hasn't helped improve personal freedom and democracy one bit. I guess communists don't care much for personal freedom and democracy, huh? 😆

And yes, as fake as anything can be!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I believe @nickelsilver has a setup like that.
    • I posted pictures earlier in this thread. My lathe and mill are two separate instruments. I think I have seen examples of putting a milling head on a lathe bed...but not certain.
    • Timex Camper, September 1994, new to me. Strap is an old perlon with "Germany" in script etched into the resin on the tail end. Not Horlon or Eulit I believe. History unknown, running strong, losing less than a minute a day. Goals for this: Wear it a ton! Buy crystal lift, clean out the gunk around the ring and under the crystal Eventually swap into a stainless steel case. I've seen a member who has swapped a Timex mechanical movement into the Timex J.Crew quartz field watch case.
    • One of the problems we would have with a watchmaker's lathe is they were made over considerable span of time and manufacturing in the early days probably wasn't as good as it was today. Then if you look at the older catalogs typically it was just the head a few collets and something to rest graver on. So basically a basic lathe with over time things acquired but acquired things may or may not fit. Order today you purchase a used lathe that all kinds of nifty bits and pieces from a seller that acquired from? This would come back to that the basic watchmaker's lathe was used for basic watchmaking like turning things with a hand graver. Then limited indexing is fine because you can make things like stems Which don't need a whole bunch indexing   In the link above the word vector is mentioned and at the link below you can purchase one. Then of course you're going to need the motor that's a little bit extra for the price. https://www.hswalsh.com/product/lathe-vector-watchmakers-48-collets-hl11. That you're going to need some bonus parts like these found this picture online show the classic way of classic gear cutting.   The lathe could have a much bigger indexing disk but it has to be mounted close to the edge. Otherwise you're going to have a whole bunch of smaller disks like this which I think has notches rather than holes. Then as wonderful as these pictures look actually cutting a gear with this is not entirely fun. Look at all is belts all pulling on things and this is a watchmaker's lathe lightweight with lots of bits and pieces attached. It would make more sense if you actually cut a gear with something like this and it tends to be it's not really the best way to do it looks nice on paper but it is not the best way to go. Reality for cutting watch parts would be a bigger machine is much better. Than getting rid of all those belts and pulleys also good. Here is an interesting channel I would've liked of found a different video but this was nice and short if you look at his video as he uses a stepping motor and worm gear assembly for the indexing plate. In this particular video it gets attached to the lathe at about one minute and seven seconds and it looks like it's hiding looks like he has a Sherline. I do know he's had other stuff you'll just have to go through his videos to find it. Then at about one minute and 22 seconds you find out if you set up things appropriately. It's always bad we end up with half a tooth at the very end. Then you will note big lathe yes he's getting a big gear but you could easily cut a watch gear with the setup. And it definitely way more stable than a watchmaker's lathe.         Oh here's a company they been in business since 1911 http://www.fwderbyshireinc.com/  
    • Hello and welcome from Leeds, England. 
×
×
  • Create New...