Jump to content

spade drill bit set


luiazazrambo

Recommended Posts

Don't know about the origins, but that's old school stuff there (at least whoever was using it was old school). Those arbors would hold the drill, the pointy side would fit in a divot on the side of a bench vice, and the plate or whatever held against the drill while the arbor was driven by a bow. Lot of crazy work was done with that crazy setup.

  • Like 1
Link to comment
Share on other sites

Hi  Back in time the British Army R.E.M.E. repaired a lot of army instruments them selves, nothing being out sourced. They had their own Watch repair department which was fully equiped with all the tools. I was once priviledged to enter one of these workshops on a work visit and chat to the men, they repaired all small instruments including compasses. The arrow mark is indeed M.O.D.

  • Like 1
Link to comment
Share on other sites

11 hours ago, watchweasol said:

Hi  Back in time the British Army R.E.M.E. repaired a lot of army instruments them selves, nothing being out sourced. They had their own Watch repair department which was fully equiped with all the tools. I was once priviledged to enter one of these workshops on a work visit and chat to the men, they repaired all small instruments including compasses. The arrow mark is indeed M.O.D.

Where was this workshop and when did you visit them? Is it possible to do such a visit still?

  • Confused 1
Link to comment
Share on other sites

Hi    The workshop in question was at York R.E.M.E strensall where I visited to repair computer equiptment in their workshop so got to know some of the men. most were apprentice trained by the Army then.  The workshops were all closed down about 20 years ago when the Britsh Army were leaving Germany.  I visited them as well before the shut down Moenchengladbach was a small military vehicle workshop,  Willich was a REME engineering workshop and Wetter on the rhur was a heavy tank refurbishment work shop sadly all closed. there still are centralised workshops in the UK but only civilian contractors are allowed in on legitimate business. There are no casual visitors allowed at all.  They are guarded by the MOD Police on the gatehouse .

  • Like 1
Link to comment
Share on other sites

1 hour ago, AndyHull said:

I wonder how those drill bits managed to be "liberated" from the MOD in the first place.

I have an identical set. They came to me in a job lot from the estate sale of an old watchmaker who apparently was trained by the army prior to his being demobbed after the war so that he had a trade to go into. 

  • Like 1
Link to comment
Share on other sites

1 hour ago, luiazazrambo said:

I like both the practicing and the tower. I heard they used to mint silver and gold coins there. :)

They also used to perform complete cranial amputation. On the plus side, they do store a lot of very expensive baubles there too, so if you can tunnel your way from your cell to the strong room, you might be able to make off with a bling-tastik hat or two. :P

Link to comment
Share on other sites

Hi  The tower as well as cranial amputations had an intersting side line in bodily investigations, Thumb screws, hot irons (not for pressing clothes), removal of fingernails  A Tudor manicure No anesthetic not to mention dentistry. A good supply of rats was available for company. So entering MOD property uninvited has its problems.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Who'd have thought to look at the supposed compatible calibres ?  🤔 Frank did 😅
    • I recently helped my mentor to service 7 Seikos and he told me not to lubricate the pallets. His reason was from his experience from the advanced classes that he conducted, his students all ended up with worse amplitudes after oiling the pallets. I have to admit that I had the same problem when I oiled the exit jewel, like so many videos on YouTube show. I actually ended up with worse amplitude.  But now I oil the escapement by oiling the teeth of the escape wheel. I think Rolex used to train their technicians this way. I find that I get about 20° -40° increase in amplitude oiling the escapement this way. I've only started playing with epilame recently. I got a bottle from a Chinese seller on AliExpress. It's supposed to be Episurf Neo but everything on the bottle is in Chinese. When the bottle arrived, half of it had evaporated or leaked. And when I brushed on a thin layer on a mirror, it dries rather slowly and even feels a bit tacky. When I did the oil spread test, like my experience with stearic acid, the treated and untreated surface of the mirror yielded similar results. The contact angle of the oil drop looked about the same for both the treated and untreated surface. When I epilamed an actual pallet fork, the escapement was so sluggish that I couldn't even get 180° amplitude. I dunno if I got conned by the seller but the results are just not convincing.
    • I usually just use 2 pair of pliers to remove the roller ( just kidding  🤔 )  I want one,I have an adjustable free standing one. But i really like the little bradux tool that nips under the roller with two tapered jaws that lift it off. You can get under a scope with it to see in detail how the job is going. There is some technique involved to stop you chopping the staff, doesn't particularly matter if the staff is already broken but it naffs up the tool's jaws if you crunch the staff, and the jaws need to be in good shape to prevent damaging the roller. But well worth a try if you've never used one and you can find one that hasn't been misused or buy a one new. The trick is to keep one of your fingers between the two arms to soften the squeeze, with a little practice its a handy little to. I will now prepare myself for an onslaught of negative feedback on it 🤣
    • With luck even possible to fit your 13 lin. movement at all 😀. Those numbers are from 5 1/4, 8 3/4 and 13‘‘‘ sizes, with very different balance wheels! Frank
    • Welcome, there are several books on staking sets, see if you can find one from Henry Fried or K&D, they will show/tell you what you can use those stumps for, you just might figure it out on your own though....
×
×
  • Create New...