Jump to content

New Video - Vintage Omega 30T2 (1940's Military Watch) With Broken Impulse Jewel

Mark

By Mark
in Watch or Horology Related Videos

 Share

Recommended Posts

Mark Distinguished Member

Mark

Posted
Posted

Just uploaded a new video. This one is one of my favourites, an Omega Military watch from the mid to late 40s. It had a broken balance staff, impulse jewel and the pivot on the centre wheel had a groove worn into it.

 

I didn't film the lathe work but managed to get quite a bit under the camera.

 

I hope it's useful to someone.

 

post-1-0-79536100-1419079855_thumb.jpg

 

Some pics:

 

post-1-0-95293900-1419082175_thumb.jpgpost-1-0-49698100-1419082176_thumb.jpgpost-1-0-00010600-1419082177_thumb.jpgpost-1-0-41873600-1419082177_thumb.jpgpost-1-0-89665500-1419082177_thumb.jpgpost-1-0-48697200-1419082178_thumb.jpgpost-1-0-97044800-1419082178_thumb.jpgpost-1-0-43095000-1419082179_thumb.jpgpost-1-0-99983600-1419082179_thumb.jpgpost-1-0-43249100-1419082180_thumb.jpgpost-1-0-12062600-1419082206_thumb.jpgpost-1-0-69137300-1419082206_thumb.jpgpost-1-0-19307200-1419082207_thumb.jpgpost-1-0-66042400-1419082207_thumb.jpgpost-1-0-23566900-1419082208_thumb.jpgpost-1-0-66467600-1419082208_thumb.jpgpost-1-0-06066800-1419082209_thumb.jpgpost-1-0-41001900-1419082209_thumb.jpg

  • Like 5
Mark Distinguished Member

Mark

Posted
  • Author
Posted
default.jpg

A gents military Omega watch with the 30T2 movement. Broken balance staff, broken impulse pin and worn centre wheel pivot. Like my Facebook page or Twitter follow for news about my videos......
Views:
icn_star_empty_11x11.gificn_star_empty_11x11.gificn_star_empty_11x11.gificn_star_empty_11x11.gificn_star_empty_11x11.gif
ratings
Time:18:27 More inHowto & Style

cdjswiss WRT Addict

cdjswiss

Posted
Posted

Another fine video with an excellent lesson on replacing the impulse pin. Thanks.

A question: when starting from a broken-off pin how do you judge the initial position of the new jewel with respect to the roller? Is that just experience or is  there a rule?

Mark Distinguished Member

Mark

Posted
  • Author
Posted

The jewel cannot foul the guard pin on the pallets. And the crescent notched into the roller is for the guard pin to pass. So, naturally, the bottom of the jewel must be above the crescent.

Hope that makes sense.

Sent from my iPhone using Tapatalk

bobm12 Distinguished Member

bobm12

Posted
Posted

Hi Mark,

 

I believe this is one of the best videos ever concerning the quality and nearness of the takes! The contents is unbelievable just like the other ones, this simply highlights it with amazing quality. I learned a lot from it continuing a learning curve only made possible by your excellent videos and forum.

 

May I ask, the plate you use to heat the Shellac -- which has appeared before in your videos -- is it something of your own manufacture or is it available for sale elsewhere? Since I got my staking tools I've been collecting all sort of goodies to work on (just waiting for a good time and some jewels) and foresee doing some of the same Shellac/heat thing you so masterly do on your videos.

 

Thank you for the info in advance and many more thanks for the excellent Christmas gift that this video represents to us. Your labor of love is deeply appreciated.

 

Cheers,

 

Bob

bobm12 Distinguished Member

bobm12

Posted
Posted

Hi Mark,

 

I enjoyed your video so much! Thank you for posting it and provide us with one more excellent learning experience! These pictures are a nice complement to the video.

 

Cheers,

 

Bob

Lawson Super WRT Addict

Lawson

Posted
Posted

Another great video Mark!

Lots of advanced yummy goodness in this one.

 

... and I believe you are using a new microphone too  .... make you sound very debonair :) 

clockboy Distinguished Member

clockboy

Posted
Posted (edited)

The plate Mark is using is I suspect what I use which is an old Clock movement plate. Another point worth noting is I attended a presentation by a guy who repairs and services watches for a living at a Kent BHI. During the meeting it was asked if you can not purchase  a replacement pivot that is scored on say a Rolex what is the alternative. The guy said it is quite acceptable to remove the score from the pivot on a lathe & re-jewel with a jewel that has a smaller internal hole. Exactly as Mark does in this excellent vid.

Edited by clockboy
  • Like 1
Mark Distinguished Member

Mark

Posted
  • Author
Posted

Thanks guys.

 

The brass plate is made by myself - just a rough job from some brass sheeting.

 

The holes are useful for blueing screws. The channel slot is useful for tempering newly made stems after hardening.

bobm12 Distinguished Member

bobm12

Posted
Posted

Thank you Mark, I appreciate the information. Do you recommend specific dimensions and type/thickness of brass sheeting or you just go by the spur (needs) of the moment, so the holes and other features are added accordingly?

 

Cheers,

 

Bob

autowind Distinguished Member

autowind

Posted
Posted

As always a first class video by a master at watch repairing and video making.  I always enjoy watching a master at work be it Mark with his shellac and diamond file or Will with his guitar.   :bow: 

Geo Distinguished Member

Geo

Posted
Posted

I finally got some time to watch Marks latest horological production. As usual a quality production that I enjoyed immensely. The more I learn, the more I wish I had been involved with horology years ago. At least now being retired, I can devote a lot more time to it.

Mark Distinguished Member

Mark

Posted
  • Author
Posted

Thank you Mark, I appreciate the information. Do you recommend specific dimensions and type/thickness of brass sheeting or you just go by the spur (needs) of the moment, so the holes and other features are added accordingly?

 

Cheers,

 

Bob

 

It was just a scrap piece of brass lying around, drilled a few holes and filed a channel :D

Mark Distinguished Member

Mark

Posted
  • Author
Posted

... and I believe you are using a new microphone too  .... make you sound very debonair :)

 

Cheers mate - was hoping to attract some female viewers with my debonair voice. So far it's not working :D

rustycolt Watch Enthusiast

rustycolt

Posted
Posted

What a genuine privilege it is to be able to watch such skilled work take place. Thank you Mark for sharing your talent with us! 

 

I'm sure the debonair voice will bring the lady watch groupies out of hiding. You should have no trouble cornering that market  :rock:

 Share
Go to topic listing

  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • VascoF
      Timex M33 - A small repair

      By VascoF · Posted

      HI everyone Some context: I'm "in love" with old Timex. As someone who has always liked watches, I knew Timex (my first watch and another project) but, in fact, the brand had never really caught my attention. By pure chance I bought, in a set of two others watches, a small m24 that was sold as not working (run and stop), which actually started working by setting the date by manually moving the hands (15 days). This coincidence made me interested in its history, its reputation, simplicity/complexity of the movements and also because some were made in Portugal back in 70’s and 80’s. A few days later I found this beautiful 1975 Viscount, m33 (very low price, almost offered) and this is where I need your help.  It is in very good condition and works well (-20s per day is not a problem for me), and although the day of the week changes correctly, the date is "stuck" on the 10th. I live in a small town that only has one watchmaker and when I purchased this watch (and having read about these movements) I thought that since it was something theoretically "simple" (probably not related to the movement), he would easily solve the problem. I couldn't be more wrong. It was as if I had proposed a pact with the devil. He refused and said he wouldn't touch the watch (although he had serviced several of my watches before - Seikos and old Swiss brands). He suggested I wear the watch like this or trash it. As I mentioned in my presentation to the forum, I have some experience in digital watches, but in manual watches I am a complete beginner. I know how to remove hands, crowns and little else. I've been doing my homework, reading the technical manual and watching a few videos on YouTube. I think I can get to the part of removing the dial without any major problems. I know that in the Date Frame there is a wheel that at the top has a tab that activates the Day Wheel and that at the bottom activates the Date Lever My aim is to try not to ruin anything and  get the date working again. The help I needed (I intend to post photos) is that what should I expect? What are the most common problems that cause this system to get stuck (in this case just the date).   PS -  My secondary objective is to buy a strap at a overpriced value from the watchmaker just to rub it in his face that I managed to get the watch working properly. PS2 - In the photos you can see that before midnight the day of the week is already changing but the day of the month has not changed.   Sorry about the english. Best Regards Vasco  
    • mikepilk
      Bent screw

      By mikepilk · Posted

      What is it from and how did it become bent ? It should bend back - I would heat it whilst bending
    • mikepilk
      Photos of your youth

      By mikepilk · Posted

      Ha, same here. I just looked and I've lots of pictures of my cars, be hardly any of me - I have a face better suited for radio. I did find this from about 20+ years ago. I'm the young looking one at the back, under the front nozzle.  
    • Gula67
      Bezel for 1954 Rolex 6581 Oyster Perpetual

      By Gula67 · Posted

      I have a 6564 with me what is take a same tropic 12 crystal,most likely have the same parameters for the bezel. Do you need the measurement for that?
    • LittleWatchShop
      Bezel for 1954 Rolex 6581 Oyster Perpetual

      By LittleWatchShop · Posted

      1954 Rolex Oyster Perpetual 6581
×
×
  • Create New...