Jump to content
Sign in to follow this  
saswatch88

My watch collection

Recommended Posts

Woow ! Impressive collection....when  I was in highschool I had one like the casio in the upper left corner..what is that model ?...

The DW-400...right?

Edited by CapMoy

Share this post


Link to post
Share on other sites
1 hour ago, CapMoy said:

Woow ! Impressive collection....when  I was in highschool I had one like the casio in the upper left corner..what is that model ?...

The DW-400...right?

yes DW-400 Tachy Meter. there are other like it DW-402 surfing timer, and DW-401 Sky Walker

 

Share this post


Link to post
Share on other sites

Superb collection of Casio's and Seiko's....the trench watches are stunning. Thanks for posting these, I have some serious watch envy right now. Seiko's and trench watches are my favourites. My oldest Seiko is a 5 DX from September 1967 (birth watch- present to myself for my 50th) all my other Seiko's are 'modern classics' SARB033 Spirit, SARB065 Cocktail Time, SARB017 Alpinist, SPB051J1 Prospex Diver 'reissue' of 62mas, the SPB051J1 is as good as Rolex in my opinion, the 6R15 is a nice movement.

SARB017, SARB033, SARB065, never worn, still in the boxes they came in...oh the shame of it.

Share this post


Link to post
Share on other sites
4 hours ago, gill1967 said:

Superb collection of Casio's and Seiko's....the trench watches are stunning. Thanks for posting these, I have some serious watch envy right now. Seiko's and trench watches are my favourites. My oldest Seiko is a 5 DX from September 1967 (birth watch- present to myself for my 50th) all my other Seiko's are 'modern classics' SARB033 Spirit, SARB065 Cocktail Time, SARB017 Alpinist, SPB051J1 Prospex Diver 'reissue' of 62mas, the SPB051J1 is as good as Rolex in my opinion, the 6R15 is a nice movement.

SARB017, SARB033, SARB065, never worn, still in the boxes they came in...oh the shame of it.

i like the 62mas reissue also the marine master reissue as well

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • I use 3 and 4 jaw chucks, large and small on a "compound lathe".   how does a " bezel - chuck" grab a crystol?  with a 4 jaw,  you invert the jaws and grab the inside so you can cut the outer diameter.   do they make chucks for jewelers lathes?   vin
    • Today, we have a big chunk of 1973 in the form of a Timex Viscount automatic day/date. This repair fought me every step of the way. It arrived with the winder connected to fresh air, and needed a complete strip down to get everything back in order. The day detent spring was misaligned, the date wheel was misaligned, the winder weight was loose, the thing was filthy both inside and out, and even getting the back off initially was problematic. I probably spent a good half hour simply trying to figure out why the day wheel refused to co-operate before I noticed the spring wasn't actually doing anything when the disk was re-fitted, due to the spring being in the wrong orientation. I suspect it got a good hard knock at some stage, which dislodged a bunch of stuff, possibly due to the frustration of the previous owner, as a result of the day wheel not turning. Everything is now all back in order, the hands are correctly aligned, the day and date kick over correctly at midnight. It is ticking away with that characteristic Timex chonk-chonk-chonk and winding nicely. I'm not sure it is going to stay on the hair puller band, I may swap it to something a little more comfortable, as I don't particularly enjoy the bald arm patches look, and my Nordic neanderthal genes mean that my arms are particularly furry. This is what it looked like when it arrived. I'll keep it on for today, and regulate it tomorrow once everything has settled down from the surgery, but it is keeping pretty good time so far. The crystal polished up well, but I still need to give the case back a quick whizz with the polishing pad to get rid of some apprentice marks, probably due to some previous owner's attempts to open the thing.
    • It's, of course, a counterfeit, and not even that well made. Below how a genuine similar one looks like, from Chrono24. As suggested you should open it not just for curiosity but to check if there is water ingress or battery leaking.
    • Hi Gents,   Currently, I try to recondition a 1970 Regency chronograph with a Landeron 248 movement.  Everything is going fine so far. Ordered new mainspring, glass, gasket and pushers as they were a bit stiff. The case itself has been replated as it was also quite worn. I dismantled the whole movement and this is where I have some problem and I would like to ask more experienced members' opinion as I am only a novice. Straight to the issue, I could not remove the 4th wheel. For me, it seems that the bottom of the 4th wheel pivot was formerly broken but still long enough to sit in the 4th wheel bottom jewel hole. In addition, it looks that a small pipe or so was fitted from the bottom plate to the end of the 4th wheel pinion. And this is the reason that I cannot remove it.  Could it have happened as I detailed above or it is a normal thing? Should I remove it anyway and change the whole 4th wheel or the pinion if I can manage to find a replacement. What can be done? what do you suggest? After this, I decided to carry on like that and at the end when I will measure the accuracy, it should show some really bad results in case if there is any affection. And now got to the second issue. So, at the end of the cleaning, I found a small pin in the bottom of the horosolv jar. I managed to find its place. However, I am not quite sure how to fit it again. To be honest, I cannot see its purpose really. From the bottom end, it is underneath the setting lever, and from the top plate also it sticks out hardly any.  Have you got any idea how to solve these problems?   Sorry for the poor quality of the pictures. Hope they help though. Please detail your answers as I am just a beginner. Any help is much appreciated. Gabe   P.S.: Please ignore the notes on some of the images which are not related to my issues. Thanks.    
    • Thanks. Sent from my iPhone using Tapatalk
×
×
  • Create New...